Freedom Venus Barstool Assembly Instruction

Assembly Instructions

Venus Barstool

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)

Care Information

GENERAL
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces
with harsh abrasives or chemicals.
METAL
Dust regularly using a clean cloth. Chrome finish can be polished using a dedicated metal cleaning product.
TIMBER VENEER
Wipe down with a clean cloth. Remove spills as quickly as possible using a damp cloth. Ensure that surface is completely dried.

Hardware

Parts

4 x Spring Washers4 x Washers 1 x Allen Key

4 x Long Bolts

4 x Short Bolts

Page 1

1 x Leg Frame

1 x Seat

1 x Brace

Assembly Instructions

Step:1

- Align and fit the Brace between the Leg Frame.

- Secure the Brace using the Long Bolts.

- Tighten Bolts using the Allen Key.

Venus Barstool

Leg Frame

Brace

Step:2

- Align the Seat to the Leg Frame. Ensure that the front of the
Seat is facing the same direction as the arrow on the seat plate.

- Secure the Seat to the Leg Frame using the Short Bolts, Spring
Washers and Washers

- Tighten Bolts using the Allen Key.

Seat

Washers

Spring Washers

Short Bolts

Page 2