Assembly Instructions
Union Dining Table
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline 1800 807 416 (Customers
outside Australia should contact their closest Freedom store.)
Care Information
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.
Hardware
Parts
Step: 1
1xPart A
Part C
1xPart B
4xPart C
Page 1
Part B
Step: 2
Assembly Instructions
Union Dining Table
Both outer sides of legs should align with both
edges of table top before tighten the bolts.
Step: 3
Part A
Page 2
Step: 4
Assembly Instructions
Union Dining Table
Step: 5
Once assembly has been completed
do not attempt to roll the table upright
as this will damage the table.
Instead two people should carefully lift,
rotate in the air and then put
the table down in an upright position on
all 4 legs.
Page 3
Loading...