Freedom Stanton Desk Assembly Instruction

Assembly Instructions

Stanton Desk

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Hardware

Parts

8

Page 1

Assembly Instructions

Stanton Desk

Step: 1

Do not tigthen all screws untill make
sure Part H is in right position to fix part J
please see below Step 3:

Step: 2

Please adjusted the end of tube to
Align the side of table top

Step: 3

Step: 4

Adjust part G to check if it fits part I on both side , then pull out the
legs and fasten the screws as following steps 4:

Page 2