Freedom Slipper Bed Assembly Instruction

Assembly Instructions

Slipper Bed

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with harsh
abrasives or chemicals.

DO NOT TIGHTEN BOLTS AND SCREWS UNTIL YOU HAVE COMPLETED ASSEMBLY

Hardware

Parts

8xPart

1

xPart A

8xPart

1

1xPart G

2

8xPart

3

8xPart

4

2

xPart D

1xPart

5

1xPart

Phillips head screwdriver
Tool needed ( not included )

6

1

xPart B

Page 1

1

xPart E

1

xPart C

2xPart F

Part D

Step: 1

Assembly Instructions

Slipper Bed

Part B

Part A

Step: 2

Step: 3

Part C

Part D

Part A

Part D

Part E

Page 2

DO NOT TIGHTEN BOLTS
UNTIL COMPLETELY ASSEMBLED!!