Freedom Sleek Dining Table Assembly Instruction

Sleek Dining Table

23286375

Thank you for purchasing the Sleek Dining Table. Before you begin to assemble your new piece
of furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information

Periodically check and re-tighten any fasteners. Avoid direct sunlight. Dust the surface weekly using a soft
cloth. Please note that high gloss surfaces are delicate and with everyday use you must expect some
visual signs of wear on the surface of the product. It is important to remove moist substances immediately.
Remove stains with a soft cloth to avoid marks on the surface.

Hardware (Supplied)

Tools Required (Not Supplied)

Rubber Mallet or Soft Hammer

Parts

Part E x 4Part D x 4Part C x 4Part B x 8Part A x 4 Part F x 4 Part G x 1

Part I x 4Part H x 1

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au

Sleek Dining Table

23286375

Step 1.

Step 2.

Page 2 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au