Freedom Retro Chair Assembly Instruction

Retro Chair

Thank you for purchasing the Retro Chair. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information

Fabric cover:Periodically check and re-tighten any fasteners. Avoid direct sunlight. Treat spills and stains
as soon as they occur. Gently scrape any soil or mop any liquid from the surface of the fabric, apply
proprietary cleaning agents strictly according to instructions to remove the residue of the spill. Do not
saturate the fabric or interior with water or other cleaning liquids. May be spot cleaned with dry cleaning
solvent. Pilling can occur occasionally as a result of normal daily wear and should not be considered as a
fault. Fibre pills can be removed by a battery operated pilling tool available from most haberdashery
stores.

Semi Aniline Leather cover:Periodically check and re-tightened any fasteners. Dust weekly with a clean
dry duster. Protect from direct and indirect sunlight. Maintain at least 30cm between your leather furniture
and heat sources. Use Freedom recommended leather care products designed for your Semi-Aniline
leather. Use care products strictly in accordance with the manufacturers instructions. Use a leather
cleaner to remove dirt and body oil build up. Use a protection cream to guard the leather from stains and
help maintain its suppleness.

Aniline Leather cover:Periodically check and re-tightened any fasteners. Dust weekly with a clean dry
duster. Protect from direct and indirect sunlight. Maintain at least 30cm between your leather furniture
and heat sources. Use Freedom recommended leather care products designed for your Aniline leather.
Use care products strictly in accordance with the manufacturers instructions. Use a leather cleaner to
remove dirt and body oil build up. Use a protection cream to guard the leather from stains and help
maintain its suppleness.

Hardware (Supplied)

4xPart A 4xPart B

4xPart C

1xPart D

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au

Retro Chair

Parts

1xPart E 1xPart F

FRONT

FRONT

Step 1.

Part D

Part F
Part A
Part B

Part C

Part E

Page 2 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au