Freedom Resort Table Durastone Assembly Instruction

Resort Dining Table Durastone Top

23206755 & 23206762

Thank you for purchasing the Resort Dining Table. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information

Periodically check and re-tighten any fasteners. Avoid direct sunlight. Dust the surface weekly using a
soft cloth. Please note that metal surfaces with everyday use, you must expect some visual signs of wear
on the surface of the product. It is important to remove moist substances immediately. Remove stains
with a soft cloth to avoid marks on the surface. Use coasters, placemats and table runners to assist in
prolonging the life of your product.

Hardware (Supplied)

Parts

Part B x 8Part A x 8 Part C x 1

Part D x 2 Part E x 1

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au

Resort Dining Table Durastone Top

23206755 & 23206762

Step 1.

Part D

Part D

Part E

Do not lift by table leg, take
care when orientating table

!

onto its feet.

Part B

Part A

Part C

Page 2 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au