Metropole Buet
23274570
Thank you for purchasing the Metropole Buet. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.
Care Information
The wood, used for your furniture, is a unique product of nature that after careful selection, is processed in a
traditional way. Its characteristics are unique: not one piece of wood is equal in shape, structure or colour. That is
why variations in colour shade are inevitable within each piece of furniture. Colour dierences in comparison to
showroom models are therefore to be expected. For normal maintenance of your piece of furniture always use a soft
cloth. When necessary you can use a damp cloth to clean the furniture. Afterwards always dry the furniture with
another cloth. Do not put the furniture near a heat source or in direct sunlight. We recommend you use table mats
and coasters made of cork or felt under pans, mugs, coee pots etc. to prevent damage. Any spillages should be
removed immediately with a dry cloth or tissue till the surface is dry. Please clean your item of furniture with a clean,
soft cloth before use. Your furniture has been treated with a normal protective coating that does not detract from its
natural appearance.
Hardware (Supplied)
Part B x 10Part A x 10
Tools Required (Not Supplied)
Phillips Head Screwdriver
Parts
Part C x 1
Part D x 12
Recommended 2 person
assembly
!
Part E x 1
Part F x 1 Part H x 1Part G x 1
Part I x 4
Page 1 of 4Freedom Customer Service: 1300 135 588www.freedom.com.au
Metropole Buet
23274570
Step 1.
Please note that Part F & G will have
either an A or B marked on them.
Please ensure that you match up the
!
markings on the leg and buet .
Step 2.
Part E
Part F
Part G
Part A bolts are for fitting the piped
sections of the foot. Part B bolts are
for fitting the flat sections of the foot
!
and also for axing Part H.
Part E
Part A
pipe
at
Part B
Part F
Part B
pipe
at
Part G
Part H
Page 2 of 4Freedom Customer Service: 1300 135 588www.freedom.com.au