Freedom Marbella Outdoor Table Assembly Instruction

Assembly Instructions

Marbella Outdoor Tbl 180x100cm

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly using a clean cloth.

The glass used for this product is known as tempered glass. Although it is up to four times stronger than normal glass, it is not
unbreakable. The same care must be applied to it as normal glass.

Wash down the wicker in a mild solution of warm soapy water using a soft brush every 6 months. Rinse with clean water and
dry thoroughly. Do not clean any surfaces with harsh abrasives or chemicals or use high pressure hoses.

Hardware

Parts

12xPartA

1xPart D

1xPart E

1xPart B

12

xPart C

Page 1

2xPart F

2xPart G

Assembly Instructions

Marbella Out Door Tbl 180x100cm

Step: 1

Step: 2

B

C

A

G

F

B

A

C

E

B
A

C

Step: 3

Finished :

D

Page 2