Freedom Lenox hat rack Assembly Instruction

Assembly Instructions

Lenox Hat Rack

Page 1

Care Information:

Periodically check and re-tighten all fasteners. W ipe down surfaces using a clean cloth weekly. Avoid direct sunlight.

Hardware

Parts

Before you begin to assemble your new coat rack, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)

F 1PC

G 1PC

A 3PCS B 3PCS E 1PC

H 3PCS

A

B

E

F

G

C 6PCS D 3PCS

D

G

G

screwdriver

C

CAUTION : DO NOT TIGHTEN SCREW S COMPLETELY UNTIL ALL THE SCREW S ARE FIXED IN THE CORRECT POSITION

NOTE:
Place parts F & A in position by
following the arrow up direction.