Freedom Lane Dining Table Assembly Instruction

Lane Dining Table

23287471

Thank you for purchasing the Lane Dining Table. Before you begin to assemble your new piece of furniture, please check to ensure that all hardware and parts have been supplied. This page lists all contents included in the carton(s). Follow instructions closely as deviation from them may present a possible safety risk and may void your warranty. It is recommended that assembly is done on a soft surface such as carpet to avoid any damage. If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information

Periodically check and re-tighten any fasteners. Dust weekly using a soft, clean cloth. Do not use harsh abrasives, chemicals or polishes containing silicone. Avoid direct sunlight as this will cause the timber to change colour. It is important to remove moist substances immediately. Use coasters, placemats and table runners to assist in prolonging the life of your product.

Hardware (Supplied)

Part A x 8 Part B x 4 Part E x 8Part C x 18 Part F x 1Part D x 8

Parts

Part G x 1 Part H x 4

Page 1 of 2Freedom Customer Service: 1300 135 588www.freedom.com.au

Lane Dining Table

23287471

Step 1.

Part B

Part A

Step 2.

Part H

Part C

Part E

Part D

Part F

Part G

Page 2 of 2Freedom Customer Service: 1300 135 588www.freedom.com.au