Freedom Henderson Bed Assembly Instruction

Henderson Bed

Thank you for purchasing the Henderson Bed. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied. This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.

Care Information
Timber

Periodically check and re-tighten any fasteners. Dust weekly using a soft, clean cloth. Do not use harsh
abrasives, chemicals or polishes containing silicone. Avoid direct sunlight as this will cause the timber to
change colour. It is important to remove moist substances immediately.

Hardware (Supplied)

Part A x 1 Part C x 8Part B x 8

Tools Required

Phillips Head Screwdriver

Step 1.

(Not Supplied)

Put the side rails on the bed head and bed foot.
(Part B)

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au

Henderson Bed

Step 2.

Step 3.

Step 4.

c

Fix the central rails on the bed
head and bed foot. (Part C)

Fix the central rails on the bed
head and bed foot. (Part C)

Page 2 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au