Freedom Frost String Lights Assembly Instruction
Instructions
Frost String Lights
Pease read the following carefully to ensure the satisfactory and safe operation of these lights.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)
Instructions for Use
This set of lights is fitted with LED bulbs, it is important to follow these instructions to ensure the satisfactory and safe operation
of these lights in use. This set has been designed so that under normal conditions, if a bulb fails the remaining bulbs should stay
alight. A defective bulb CANNOT be removed and replaced.
For Safety's Sake
For indoor use only
Do not operate this set in the packaging
Do not operate in moist or very humid conditions
Disconnect from mains when not in use
Avoid damage to the wiring insulation
As with all electrical equipment, cable and fittings should not be exposed to direct heat or flame
Ensure adequate airflow around each lamp
Do not connect this set electrically to another set
For use only with the transformer supplied. Do not connect directly to mains supply
If light chain is damaged, light set should be disposed of
Bulbs can not be replaced
Please keep this information for reference
Transformer
This set is supplied with 24V AC 2.4VA transformer and should only be used with this transformer
Important
THIS SET IS SUITABLE FOR INDOOR USE ONLY. DO NOT USE OUTDOORS
Specification
Bulb Rating: 3V 0.06W x 40 (Not Replacable) Transformer Input: 240V AC 50Hz
Bulb Spacing: 10cm Transformer Output: 24V AC 2.4VA Maximum 2.4W
Lead Wire: 5m Model No.: JT-240V0100
Approval No.: N15922
Page 1
Loading...