Freedom Dijon Extension Dining Table Assembly Instruction

Assembly Instructions

Dijon Extension Dining Table

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Hardware

Parts

8xPart A

8xPart B

1xPart E

8xPart C

1xPart D

2xPart F

Page 1

4xPart G

Step: 1

Assembly Instructions

Dijon Extension Dining Table

Part B

Part C

Part A

Part D

Part E

Part G

Step: 2

Part E

Part G

Page 2

Assembly Instructions

Dijon Extension Dining Table

Step: 3

Unfold the gliders to the extreme position, then place the extension leaves (Part E) on the gliders.
Slide the extension leaves carefully to the close position.

Part E

Step: 4

Adjust the sliders in correct position, make sure the extension leaf keep in level with the table top,
then turn the locks under the table top to the “ON” position to secure the extension leaves.
Assembly is now complete.
If take away the extension leaf, just follow the opposite steps.
Warning: For the extension leaf, the Max. loading capacity is 350N .

.

Page 3