Freedom Concept Dining Table Assembly Instruction

Assembly Instructions

Concept Dining Table

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service on 1300 135 588.
(Customers outside Australia should contact their closest Freedom store.)

Care Information:

Wipe down all surfaces using a clean cloth weekly. Clean Glass using a recognised glass cleaning product. Avoid any
overspray and do not clean the frosted side. Although Tempered Glass is stronger than normal glass it is not unbreakable and
can break if subjected to mechanical or thermal stress.

Hardware & Parts

1 x Glass Top 1 x Table Frame 4 x Grommets

Step 1.

Stick the Grommets in the middle of each side of the Table Frame.

Square Table Frame

Step 2.

Carefully place the Glass on the Table Top (frosted side facing down).
Evenly positioned, the Glass will overhang the Frame slightly.

Rectangular Table Frame

Page 1

Due to the weight of the
glass, more than one

!

person is recommended to
complete this step.