Freedom Cavalli 5 Drawer Chest Assembly Instruction

Assembly Instructions

Cavalli 5 Drawer Chest

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Page 1

Assembly Instructions

Cavalli 5 Drawer Chest

Furniture Tipping RestraintS

Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended.

When properly installed, this restraint could provide protection against the unexpected tipping of furniture due
to small tremors, bumps or climbing. We recommend mounting this restraint to a wall stud.

WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.

Installation Instruction:

1. Attach one of the mounting brackets securely near the top back edge of the furniture piece by inserting the screw.

2. Determine the nal position of the furniture piece. Mark location on the wall approximately 2" below the bracket
mounted to the back of the furniture.

3. Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall and insert plastic anchor.
Gently tap anchor until the ange of the anchor is ush with the wall.

4. Attach the second bracket by inserting and securing the screw to the wall.

5. Align the two brackets.

6. Thread the strap through both brackets and tighten until snug.

7. Check to make sure that the brackets are rmly installed and the strap is secure

Page 2