Freedom Cancun Tallboy Assembly Instruction

□ Before you begin to assembly your new piece of furniture, please check to ensure that all parts have been supplied.
□ Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
□ It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
□ If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]

(Customers outside Australia should contact their closest Freedom store.)

Care information

□ General: Avoid direct sunlight. Wipe down all surfaces using a damp cloth weekly. Do not use harsh abrasives or

chemicals. Always use mats to protect the surface from hot or cold items. Wipe up spills immediately. Periodically check
and retighten any fasteners.

□ Timber: Freedom offers a range of quality care products that can enhance the durability of the timber finish. A

combination of Liberon Superior Danish Finishing Oil and a Liberon Polish will increase resistance to staining and
marking. Please note that applying these care products will slightly alter to look and feel of the timber. Please visit your
Freedom store for more information.

Hardware

Parts

C x 2B x 1A x 1 D x 2

Page 1

B

C

D

Make two holes with diameter 8mm on the wall,

The hardware supplied is suitable for concrete,

plaster or wood wall. For other wall types, please

see your local hardware store.

Page 2

D

C

A