Freedom Brasilia Tables Assembly Instruction

BRASILIA TABLE INSTRUCTIONS

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)

Care Instructions: Periodically check and re-tighten any fasteners. Dust weekly using a clean cloth. Use a Freedom
recommended polish every three - to - six months. Do not use harsh abrasives, chemicals or polishes containing silicone. Always
use coasters, table cloths and runners to protect the surface. Avoid direct sunlight as this will cause the timber to change colour.
If the product is in direct sunlight, move items such as vases to avoid spotting.

Assembly Information: Due to the size and weight of the product, more than one person is recommended to lift the table.

Hardware

8 x Washers8 x Bolts 1 x Spanner

Leg

Table Top

Bolt

Step One

- Carefully lay the Table Top face down on the ground.

- Ensure the top is protected on a soft surface to avoid
any damage.

Washer

Step Two

- Align the Bolts and Washers with the holes on the Legs .

- Tighten the Bolts using the Spanner supplied.

- Once all Legs are secured, carefully lift the table up into its
correct position.