Freedom Bento Dining Table Assembly Instruction

Assembly Instructions

Bento Dining Table

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588 (Customers outside Australia should contact their closest Freedom store.)

Care Information:

Periodically check and re-tighten all fasteners. Wipe down surfaces using a clean cloth weekly. Use table runners and coasters to help protect the surface. Avoid placing hot items directly such as coffee mugs on the surface. Avoid direct sunlight as this will cause the colour to change. If the product is in direct sunlight, move items such as vases around to avoid spotting. Use only Freedom recommended polishes and waxes every 3-6 months. Avoid polishes with high amounts of silicone and petroleum distillate

Hardware

Parts

Part A x 8

Part D x 1

Part B x 8 Part C x 1

Part E x 4

Page 1

Step 1.

Assembly Instructions

Bento Dining Table

Match up the number on Part E with the one printed

on the corner of Part D

Part E

Step 2.

Part D

Page 2

Part E

PartC

PartB

PartA

Finished.

Part D