Freedom Archer Dresser Assembly Instruction

Assembly Instructions

Archer 6-drawer Dresser

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone] (Customers
outside Australia should contact their closest Freedom store.)

Care Information

Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.

Hardware

Parts

Back

Page 1

Step: 1

Assembly Instructions

Archer 6-drawer Dresser

Drill a hole on the wall

Back

---"IMPORTANT: The screw supplied with the anti topple strap is to be used only for
fixing the anti topple strap to the furniture. In addition to this you will need to choose
a screw or fitting which is suitable for securing the strap to the kind of wall that you
have. If you are unsure about what type of screw to use, please contact your local
hardware store."

Finished:

Page 2