Freedom Applause Coffee Table Rectangle Assembly Instruction

APPLAUSE
COFFEE TABLE RECTANGLE
(AP CT12)
Before you begin to assemble your new piece of furniture please check to ensure all parts and fittings have been supplied. Follow all instructions closely as deviation from them may void warranty and present possible safety risk. It is recommended that assembly is done on a soft surface, like carpet, to avoid damage. CARE INSTRUCTIONS: Periodically re-tighten all fasteners. TOOLS REQUIRED: Allen key (provided), screwdriver and hammer. Some packs may come with timber of a different colour to the model purchased. These pieces are for packing purposes only.
If you experience any problems with your new purchase please phone our Customer Service staff on (FREE CALL PHONE / FAX) 1800 029 715
Please keep last page of the instruction for warranty information.
CLEANING AND MAINTENANCE: Do not use solvent or alcohol based cleaners on this unit. To clean unit, we recommend using a warm damp cloth to wipe over surfaces.
PARTS CHECKLIST
CODE PART SIZE QTY
A GLASS TOP 1193 x 585 1
B TOP / SHELF 1195 x 587 2
C SIDE 295 x 595 2
D RAIL 1195 x 80 1
D
C
(A)
B
B
C
FITTINGS CHECKLIST
CODE FITTING DESCRIPTION QTY CODE FITTING DESCRIPTION QTY
50-001 32mm WOODEN DOWEL 10 50-140 METAL CAM COVER 2
50-009 4mm ALLEN KEY 1 50-459 BUMP STOP 6
50-015 METAL DOWEL 10 51-511 METAL FOOT 4
50-016 METAL CAM 10 80-001 GLUE 1
50-043 HI LO SCREW 8
CODE: AP CT12 MADE IN AUSTRALIA BY KD CONCEPTS
PAGE 1 OF 3
STEP 1: PREPARE SIDES (x 2) STEP 2: PREPARE RAIL
50-015
x 10
50-001
x 2
50-043
x 8
51-511
x 4
x 2
50-015
x 2
C
D
STEP 3: PREPARE TOP AND SHELF
50-015
x 8
50-001
x 8
B
(UNDERSIDE)
x 2
CODE: AP CT12 MADE IN AUSTRALIA BY KD CONCEPTS
PAGE 2 OF 3
Loading...
+ 1 hidden pages