Freedom Alonso Outdoor Table Assembly Instruction
Assembly Instructions
Alonso Outdoor Table
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline 1800 807 416 (Customers
outside Australia should contact their closest Freedom store.)
Care Information
Periodically check and re-tighten any fasteners.
TABLE TOP CARE:
Wash down table top twice a year using a mild solution of hand dishwashing detergent and warm water. Rinse with clean water
and dry using a soft cloth or towel.To clean stubborn stains use a dedicated concrete cleaner.
METAL FRAME CARE
All metal is galvanised to prevent rusting. If powdercoat is chipped or scratched off, apply a matching nail polish or anti -rust
paint.
Hardware
12 x Part A
Bolt
Step 1.
Due to the weight of the table top,
more than one person is
recommended to complete
!
this step. Assemble the product
close to its intended final position.
4 x Part B
Wing Nut
1 x Part C
Allen Key
Part A
Page 1
Step 2.
Due to the weight of the table top,
more than one person is
recommended to complete
!
this step. Assemble the product
close to its intended final position.
Assembly Instructions
Alonso Outdoor Table
Page 2
Loading...