Freecom Technologies Network Drive XS User Manual
USER MANUAL
NETWORK DRIVE XS
EXTERNAL NETWORK HARD DRIVE / 3.5" / GIGABIT LAN / USB 2.0
Rev. 945
Freecom Network Drive XS
EN
Dear user,
Thank you for selecting the Freecom Network Drive XS. The Freecom Network Drive XS
offers easy-to use network storage possibilities. To ensure you get the best performance
and ease of operation, please read this manual carefully before using the Freecom
Network Drive XS.
Freecom Technologies GmbH • Germany
www.freecom.com
Contents of the box
Please check the contents of the box to ensure it contains the following items:
•
F
reecom Network Drive XS
• Power adapter & power cord
• LAN connection cable
• USB connection cable
• Manual, safety manual and application software on CD
• Quick Install Guide
Need assistance? Have questions?
In case you have a question about the use of this product, need information about other
Freecom products or need technical assistance, please contact the Freecom Service Center
for your country. See www.freecom.com for details.
Freecom offers free unlimited helpdesk support.
Warning !
All rights reserved. The products named in this manual are only used for identification
purposes and may be trademarks or registered trademarks of the respective companies.
This device was designed for home or office use.
Warning! This device is equipment complying with EN55022 class A. This equipment
can cause radio disturbances in a residential area. If this is the case, the user has to take
appropriate measures and assume all responsibility and costs for. It may not be used near
or with any life-sustaining systems.
Freecom cannot be made liable for any damages, loss of data or damage following
thereof -whatsoever (including, without limitation, damages for loss of business profits,
business interruption, loss of business information, or other pecuniary loss) arising out
of the use of or inability to use this Freecom product, even if Freecom has been advised
of the possibility of such damages.
We reserve the right to upgrade our products in keeping with technological advances.
2
EN
Table of Contents
User's Guide
General Information
System requirements .................................................................................................. Page 4
Precautionary measures ............................................................................................Page 5
Freecom Network Drive XS Setup Overview ..................................................... Page 6
Chapter 1:
Hardware Installation ......................................................................................................... Page 7
Chapter 2:
Computer Configuration - LAN Mode .......................................................................... Page 8
Chapter 3:
Installation of the application software ...................................................................... Page 14
Chapter 4:
Accessing the Network Drive XS ....................................................................................Page 16
Chapter 5:
Configuration of the Freecom Network Drive XS .................................................... Page 20
Chapter 6:
LAN Connection Types of the Freecom Network Drive XS .. ..................................... Page 38
© 2009 Freecom Technologies
3
Freecom Network Drive XS
EN
General Information
Your system needs to meet the following hardware and software requirements for the
device to function properly.
System requirements
To use the Freecom Network Drive XS, you will require the following components:
PC:
• I
ntel Pentium III / AMD Duron 900 MHz or higher
• 256 MB RAM (Vista / 7: 512 MB RAM) or higher
• CD-ROM drive
• Free USB 2.0 or USB 1.1. port* or
• LAN (1000Base-T full duplex connection recommended)
• Internet connection for online warranty registration, software updates and downloads
• Operating system: Windows XP, Windows Vista, Windows 7
Mac:
• P
owerPC G4/G5 or Intel Mac
• 256 MB RAM or higher
• CD-ROM drive
• Free USB 2.0 or USB 1.1. port* or
• LAN (1000Base-T full duplex connection recommended)
• Internet connection for online warranty registration, software updates and downloads
• Operating system: Mac OS X v10.4 or higher
* USB 2.0 is backwards compatible with USB 1.1.
4
EN
General Information
Precautionary measures
To ensure that your Freecom Network Drive XS functions properly, please take note of
the following precautions. If these are not followed, you may void your warranty and
damage the Freecom Network Drive XS.
• S
afely remove the Freecom Network Drive XS via your operating system (the "unplug
or eject hardware" option in the Windows taskbar) before disconnecting the USB
cable or power cable and before switching off the device. Failing to do so may result
in data loss.
o not drop the Freecom Network Drive XS or expose it to other kinds of sudden
• D
mechanical shocks as this may result in data loss and damage to the Network
Drive.
o not use the Freecom Network Drive XS when the ambient temperature is below
• D
10°C or above 30°C.
f the Freecom Network Drive XS is moved from a cool environment to a warmer
• I
environment, please allow the drive to acclimatize to the ambient temperature
before operating the device. Failing to do so may lead to condensation within the
drive enclosure, which in turn may cause the drive to malfunction.
o not place liquids or drinks on the Freecom Network Drive XS. When liquids are
• D
spilled and get in contact with the electronics within the drive enclosure, it will
damage the drive and will cause the drive to malfunction.
o not use the Freecom Network Drive XS in a dusty environment. Dust inside the
• D
enclosure may damage the internal electronics and result in drive malfunction.
pening the Freecom Network Drive XS will void the warranty.
• O
• Since USB 2.0 is backwards compatible with USB 1.1, the Freecom Network Drive XS
can be connected to all USB ports. When connected to a USB 1.1 port, however, the
performance (data transfer rate) of the Freecom Network Drive XS will be much lower
than when the drive is connected to a USB 2.0 port.
nly use the power adapter that was supplied with the Freecom Network Drive XS.
• O
5
6
Freecom Network Drive XS
EN
Freecom Network Drive XS Setup Overview
LAN (Ethernet) mode
USB-mode
USB-mode
7
EN
1
Hardware Installation
Chapter 1: Hardware Installation
WARNING! Only connect the Network Drive XS via the USB or LAN Port.
Never use both ports at the same time!
1. Plug the cable (USB or LAN) into the Freecom Network
Drive XS.
2. Insert the power cord into the Freecom Network Drive XS
and plug the power supply into the socket.
3. Plug the cable into the por t (USB or LAN) on your
computer.
Because USB 2.0 is backwards compatible with USB 1.1, you can connect the Freecom
Network Drive XS to any USB port. Please note however that USB 2.0 ports support
significantly higher data transfer speeds than USB 1.1.
Driver Installation: Your computer will not require a special Freecom
driver if you are using Windows XP / Vista / 7 or MacOS X. The required
driver is automatically installed by the operating system when the cable
is plugged into your computer.
Freecom Network Drive XS
EN
2
Chapter 2: Computer Configuration - LAN Mode
2.1 Check TCP/IP Settings in Windows XP
1. Open "Start" -> "Settings" -> "Control Panel".
2. Double-click on "Network Connections".
3. Right-click on your "Local Area Connection" and select "Properties".
8
EN
2
Computer Configuration - LAN Mode
4. The following screen will appear. Select "Internet Protocol (TCP/IP)" and click on the
"Properties" button.
In the "General" tab, select "Obtain an IP address automatically" and "Obtain DNS
5.
server address automatically".
9
Freecom Network Drive XS
EN
2
2.2 Check TCP/IP Settings in Windows Vista / 7
1. Open "Control Panel" -> "Network and Sharing Center".
Click on "Manage network connections".
2.
10
EN
2
Computer Configuration - LAN Mode
3. Right-click on "Local Area Connection" and select "Properties".
4. In the "Networking" tab, select "Internet Protocol Version 4 (TCP/IPv4)" and click on
"Properties".
11
Freecom Network Drive XS
EN
2
5. In the "General" tab, select "Obtain an IP address automatically" and "Obtain DNS
server address automatically".
2.3 Check TCP/IP Settings in Mac OS X
1. Open "System Preferences" -> "Network".
12
Loading...