Freecom Technologies FHD-1 User Manual
www.freecom.com
FHD-1
Rev. 224
GB
FREECOM FHD-1
Dear user!
Thank you for choosing the Freecom FHD-1 external hard drive. For optimal use
and performance we advise you to read this manual carefully before using this
product.
Freecom Technologies Germany
www.freecom.com
Contents of the box
Please check the contents of the box; the following items should be included:
Freecom FHD-1 external USB 2.0 hard drive
Power Adapter
Freecom Cable II USB 2.0
CD-ROM with manual, driver and application software
Quick Install Guide
Warranty card + envelope
If one of these items is missing please contact the Freecom Support Centre for
your country (see page 42) or your local Freecom dealer.
Your Freecom FHD-1 comes with 2 years manufacturers warranty (in
Europe) with on-site** warranty exchange. Please take the time to
register your product either by filling the enclosed warranty card or by
registering online at www.freecom.com.
** on-site warranty exhange only in UK, D, F, NL, B, L, CH, A (other countries to follow soon).
Warning !
All rights reserved. The products named in this manual are only used for identification
purposes and may be trademarks or registered trademarks of the respective
companies. This device was designed for home or office use.
Freecom cannot be made liable for any damages, loss of data or damage following
thereof -whatsoever (including, without limitation, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss)
arising out of the use of or inability to use this Freecom product, even if Freecom
has been advised of the possibility of such damages.
We reserve the right to upgrade our products in keeping with technological
advances.
2
Table of Contents
USER MANUAL
General Information ........................................................................... page 4
Precautionary measures ..................................................................... page 5
FHD-1 external USB 2.0 hard drive .................................................... page 6
CHAPTER 1:
Installation of the Freecom SYNC software ...................................... page 8
CHAPTER 2:
Hardware installation ......................................................................... page 10
CHAPTER 3:
Driver installation (only Windows 98 SE) .......................................... page 12
GB
CHAPTER 4:
Daily use of the FHD-1 with Freecom SYNC software ...................... page 14
CHAPTER 5:
Partitioning your FHD-1 ..................................................................... page 28
CHAPTER 6:
Troubleshooting ................................................................................. page 41
Freecom Internet Service & Support Hotline .................................... page 42
© 2002 Freecom Technologies
3
GB
FREECOM FHD-1
General Information
The following hardware and software requirements must be fulfilled to ensure
trouble-free operation.
Hardware Requirements
In order to use the Freecom FHD-1, following components are needed:
Intel Pentium II 233MHz or higher
64MB RAM or higher
CD-ROM drive for installing drivers and/or software
Available USB 2.0 or USB 1.1 port
(USB 2.0 is downwards compatible to USB 1.1. To achieve optimal performance
from the Freecom FHD-1 your PC should be equipped with an USB 2.0 port.
USB 2.0 PCI Host Controllers are separately available at www.freecom.com).
Internet connection for online warranty registration and driver/software
updates and downloads
Software Requirements
Windows 98 SE
Windows ME
Windows 2000
WindowsXP
4
Precautionary measures
Precautionary measures
To ensure that your Freecom FHD-1 functions properly, please take note of the
following precautions. If these are not followed, you may void your warranty
and damage the FHD-1.
Safely remove the FHD-1 via your operating system (the "unplug or eject
hardware" option in the Windows taskbar) before disconnecting the Freecom
Cable II USB 2.0 or the power cable. Failing to do so may result in data loss.
Do not drop the Freecom FHD-1 or expose it to other kinds of sudden
mechanical shocks as this may result in data loss and damage to the hard
drive.
Do not use the Freecom FHD-1 when the ambient temperature is below 10°C
or above 45°C.
If the Freecom FHD-1 is moved from a cool environment to a warmer
environment, please allow the drive to acclimatize to the ambient temperature
before operating the device. Failing to do so may lead to condensation
within the drive enclosure, which in turn may cause the drive to malfunction.
Do not place liquids or drinks on the FHD-1. When liquids are spilled and get
in contact with the electronics within the drive enclosure, it will damage the
drive and will cause the drive to malfunction.
Do not use the FHD-1 in a dusty environment. Dust inside the enclosure may
damage the internal electronics and result in drive malfunction.
Only use the power adapter that was supplied with the FHD-1.
Opening the FHD-1 will void the warranty.
GB
Note: Since USB 2.0 is backwards compatible with USB 1.1, the FHD-1 can
be connected to all USB ports. When connected to a USB 1.1 port,
however, the performance (data transfer rate) of the FHD-1 will be much
lower than when the drive is connected to a USB 2.0 port.
IMPORTANT
The SYNC button on the FHD-1 is designed to work with the Freecom
SYNC software, which can be found on the Manual and Software CD.
Freecom SYNC uses the Microsoft Briefcase to synchronize files.
When using the Freecom SYNC software, please be aware that all files
in the SYNC folder on the FHD-1 are linked to the original files on your
PC or network. If you delete a file in the SYNC folder, its original will be
deleted during the next synchronization, too! To avoid this, you have to
Split From Original the file prior to deleting it. Please refer to chapter
4 for further information on Freecom SYNC and Microsoft Briefcase.
5
GB
FREECOM FHD-1
FHD-1 external USB 2.0 hard drive
If you are looking for maximum performance, maximum storage capacity and
maximum reliability from an external hard drive, the Freecom FHD-1 is the right
choice. The hi-speed data transfer through the USB 2.0 interface makes it ideally
suitable for data-storage, file sharing, backup, archiving, digital video editing,
audio playback and all applications that need fast file access.
For your convenience, the Freecom FHD-1 has been partitioned (1 partition) and
pre-formatted (FAT32 file system). The FAT32 format ensures maximum
interchangeability of the FHD-1 between different computers. Should you
choose to format the FHD-1 in another file system (e.g. NTFS), please be aware
of possible problems when connecting the FHD-1 to another computer than the
one you used for formatting.
Note: do not cover the ventilation holes; these are essential for
maintaining the correct operating temperature for the FHD-1.
6
FHD-1 external USB 2.0 hard drive
Options:
Freecom USB 2.0 LE PCI Host Controller, 2 ports
Freecom USB 2.0 PCI Host Controller, 5 ports
Freecom FireWire Cable for FHD-1 (available soon)
Additional Freecom Cable II USB 2.0
Additional Power Adapter
See www.freecom.com for these and other Freecom products, or contact your
local Freecom reseller/dealer.
Recommended sequence of installation
1. Install Freecom SYNC software.
1. Connect all cables to the drive and plug the power supply unit into the socket.
Plug the Freecom Cable II USB 2.0 into a USB slot of your computer.
2. Install all necessary drivers under Windows 98 SE.
Under Windows ME / 2000 / XP a separate Freecom driver is not required.
5. Creating a SYNC folder with Freecom SYNC software.
Please refer to chapters 1-3 for a detailed description of the hardware and
software installation.
GB
7
GB
1
FREECOM FHD-1
C HAPTER 1: Installation of the Freecom SYNC software
If you want to use the SYNC button on the FHD-1, you need to install the Freecom
SYNC software first.
1. Insert the Manual and Software CD into the CD-ROM drive. The software
starts automatically. If not, please double-click on the "Start" icon, which you
can find in the root directory of the CD. Please select "Software Installation"
and click on "Freecom SYNC 1.0". Follow the instructions on the screen;
please select "Next" to continue installation.
2. Please read the license agreement carefully. If you accept the license
agreement please select "Yes". NOTE: Selecting "No" will cancel installation.
Choose the destination folder and the program folder in the start menu you
want the SYNC icon to appear.
The default destination folder is C:\Program Files\Freecom SYNC. You can choose
a different destination folder for the program files by clicking on the "Browse"
button.
8
Installation of the Freecom SYNC software
3. In the "Options" dialog you can choose whether you want to place a shortcut
to Freecom SYNC 1.0 on your desktop and/or place an icon in the Windows
taskbar. It is recommended to select both options in order to improve the
usability of Freecom SYNC 1.0. Select "Next" to start installation and copy all
necessary program files to your computers hard drive.
4. In the last window you are requested to choose if you want to start Freecom
SYNC 1.0. It is recommended to select this option in order to configure your
Freecom FHD-1. Please select "Finish".
GB
1
9
GB
2
FREECOM FHD-1
C HAPTER 2: Hardware Installation
Since USB 2.0 is backwards compatible with USB 1.1, the FHD-1 can be connected
to all USB ports. When connected to a USB 1.1 port, however, the performance
(data transfer rate) of the FHD-1 will be much lower than when the drive is
connected to a USB 2.0 port.
For optimal performance, the FHD-1 should always be connected to a
USB 2.0 port. Freecom USB 2.0 PCI Host Controllers are available at
www.freecom.com.
1. Connect the large, 36pin connector of the Freecom
Cable II USB 2.0 to the FHD-1.
2. Connect the cable of the power supply to the FHD-1
and the power supply itself to the socket.
10
3. Connect the USB connector to a USB port of your
computer.
Recommended after Hardware installation
- for Windows 98:
Hardware Installation
GB
After you connected the FHD-1, please start with the driver installation, as in
chapter 3 on page 12 described.
- for Windows ME / 2000 / XP:
Under Windows ME / 2000 / XP a separate Freecom driver is not required. The
drivers for Windows ME, Windows 2000 and Windows XP will be installed
automatically by the operating system after plugging in the Freecom FHD-1 into
the USB port of the computer. Your Freecom FHD-1 is fully backwards compatible
with USB 1.1.
Creating a SYNC folder
1. After the installation of the FHD-1 is finished, the Freecom SYNC folder will
be created automatically. If not, please refer to chapter 4.3 (page 16 -
Creating a new SYNC folder).
2. Freecom SYNC uses the Microsoft Briefcase to synchronize files between
computer and FHD-1. A window with some brief information about the
Microsoft Briefcase appears. Please read the information carefully and refer
to the Windows Help function for further information on using Microsoft
Briefcase. Click on "Finish" to conclude the creation of the SYNC folder.
Afterwards the Freecom SYNC folder opens.
2
11
GB
3
FREECOM FHD-1
C HAPTER 3: Driver installation (only Windows 98 SE)
Note: Your Freecom FHD-1 is fully backwards compatible with USB 1.1.
The installation for USB 1.1 is the same as described below for USB 2.0.
1. Insert the Freecom Manual and driver CD into the CD-ROM drive.
2. Connect your Freecom FHD-1 to the USB connector of your notebook or
computer.
3. The "Add New Hardware Wizard" opens and a "USB 2.0 Device" (USB 2.0 PCI
Host Controller) or a "USB2-IDE Controller" (USB 1.1 connector) is found.
Click on "Next".
4. In the next window select "Search for the best driver for your device.
(Recommended)". Click on "Next".
5. Make sure that the checkbox "CD-ROM drive" is activated in the next
window.
12
Driver installation (only Windows 98 SE)
Continue by clicking on "Next".
6. The Hardware Wizard finds a "Freecom Cable II USB-2".
GB
3
By clicking on "Next" the necessary files will be installed. Afterwards click on
"Finish" to complete the installation. Congratulations! Youve just finished
to install the Freecom FHD-1 and the external hard drive is almost ready to
use.
Creating a SYNC folder
1. After the installation of the FHD-1 is finished, the Freecom SYNC folder will
be created automatically. If not, please refer to chapter 4.3 (page 16 -
Creating a new SYNC folder).
2. Freecom SYNC uses the Microsoft Briefcase to synchronize files between
computer and FHD-1. A window with some brief information about the
Microsoft Briefcase appears. Please read the information carefully and refer
to the Windows Help function for further information on using Microsoft
Briefcase. Click on "Finish" to conclude the creation of the SYNC folder.
Afterwards the Freecom SYNC folder opens.
13
Loading...