Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written consent of Hewlett-Packard. The information is provided
“as is” without warranty of any kind and is subject to change without notice. The only warranties for HP products and services are
set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Revision history
VersionDateChanges
Edition 1June 2007For LTO Ultrium 4 FC, SCSI and SAS drives
This document is frequently revised and updated. To find out if there is a later version, please ask your HP OEM Representative.
This is one of six volumes that document HP LTO Ultrium drives. This volume gives specifications for
the following products. The capacities are using hardware data compression with a compression
ratio of 2:1 where applicable:
• HP LTO Ultrium 4 Fibre Channel tape drives
• HP LTO Ultrium 4 SCSI tape drives
• HP LTO Ultrium 4 SAS tape drives
The following documents provide additional information:
Documents specific to HP LTO Ultrium drives
• Hardware Integration Guide, volume 1 of the HP LTO Ultrium Technical Reference Manual
• Software Integration Guide, volume 2 of the HP LTO Ultrium Technical Reference Manual
• Host Interface Guide, volume 3 of the HP LTO Ultrium Technical Reference Manual
• UNIX, Linux and OpenVMS Configuration Guide, volume 5 of the HP LTO Ultrium Technical
Reference Manual
Please contact your HP supplier for copies.
• The features and benefits of HP LTO Ultrium drives are discussed in the HP LTO Ultrium
Technology White Paper.
• For a general background to LTO technology and licensing, go to
http://www.lto-technology.com
.
Documentation map
The following will help you locate information in the Technical Reference Manual. A reference like
“
1 HW Integration:ch. 7” means Volume 1, Hardware Integration Guide, of the HP LTO Ultrium
Technical Reference Manual, chapter 7.
Drives—general
Connectors
Front panel LEDs
Specifications
Installation and configuration
Connectors
Determining the configuration
External drives
Error codes
Handling errors
Logs—see the LOG SENSE command
Recovering from write and read errors
Software response to error correction
Software response to logs
TapeAlert log
LTO Ultrium features
Autoload
Automation Control Interface (ACI)
Cartridge Memory (LTO-CM)
Data compression, managing
OBDR and CD-ROM emulation
Performance, factors affecting
Software design
Supporting LTO Ultrium features
General documents and standardization
See http://www.t10.org/t10_main.htm for INCITS SCSI Primary Commands—3 (SPC-3), SCSI
Streaming Commands (SSC-3) and other specifications
Copies of documents of other standards bodies can be obtained from:
2 SW Integration: ch. 1
2 SW Integration: ch. 4
2 SW Integration: ch. 1
2 SW Integration: ch. 5
INCITS
ISO
ECMA
Global Engineering
Documents
11 West 42nd Street
New York,
NY 10036-8002
USA
CP 56
CH-1211 Geneva 20
Switzerland
114 Rue du Rhône
CH-1204 Geneva
Switzerland
2805 McGaw
Irvine, CA 92714
USA
Tel: +41 22 849 6000
Web URL: http://www.ecma.ch
Tel: 800 854 7179 or 714 261 1455
8
HP restricted
1Features
FeatureFull-height drives
Recording formatLinear Tape Open Ultrium-4 and Ultrium-3. LTO Ultrium-2 tapes
Data compressionALDC
Data encoding method16-channel PRML
Variable speed recording40–120 MB/s LTO 4
Read-While-WriteStandard—data is verified immediately after it is written
Auxiliary memory in
cartridge (CM)
Data interfacesFC: 4 Gb/s Fibre Channel, Class 3, dual port, multi-mode connector:
Library interfaceBi-directional RS422 (serial protocol RS422 9600 to
Main data buffer size128 MB
Burst buffer sizeFC: 16 MB