Freddo FEDD1078 w

TEST REPORT

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

1 OF

12

Bureau Veritas Testing Technical Service
(Zhejiang) Co.,Ltd

1F west, 6F east, 7F east, 8F, Building B,
No.66,Qingyi Road, Ningbo, Zhejiang, China
Tel:[phone], Fax:[phone]
website:cps.bureauveritas.com

This report is governed by, and in corporates by reference, CPS Conditions of Service as posted at t he date of issuance of this report at
http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any
copying or replication of t his report to or for any other person or entity, or use of our n ame or trademark, is permitted only with our prior
written permission. This report sets forth o ur findings solely with respect to the test samples identified h erein. The results set forth in this
report are not indicative o r representative of the quality or characteristics of the lot from which a test sa mple was taken or any similar or
identical product unless specifically a nd expressly noted. Our report includes all of the tests requested by you and the results th ereof based
upon the in formation that you provided to us. Measurement uncertainty is only p rovided upon request for accredited tests. You have 60
days from d ate of issuance of this report to notify us of a ny material error or omission caused by our negligence or if you req uire
measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise.
A failure to raise su ch issue within the prescribed time shall constitute you unqualified acceptance of the completeness o f this report, the
tests conducted and the correctness of th e report contents.

Date of Submission:

2021-05-08,2021-07-22,2021-08-17

Test Period:

2021-05-08 to 2021-08-25

Sample Description:

Test Item(s):

Details see attached page(s).

TEST REQUESTED

The samples is tested as “Over 3months of ages” per the client’s request.

The samples was not evaluated to the Normal Use testing requirements specified in ASTM F963-17, Section 8.5. It is the responsibility of the
manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not
generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to
simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests
shall simulate the intended use of the toy based on its estimated lifetime.

REMARK

General enquiry and invoicing

Ms. Kira Hong

[email protected]

Technical enquiry

BUREAU VERITAS TESTING TECHNICAL SERVICE (ZHEJIANG) CO.,LTD

PREPARED BY :

MARY

Applicant:

ZHEJIANG JIAJIA RIDE-ON CO.,LTD

XINCANG INDUSTRIAL ZONE PINGHU CITY,ZHEJIANG PROVINCE,CHINA.

Children’s car

Sample Status ： Intact
Manufacturer: / Buyer: /
Style No.(s): JS009 PO No.: /
Country of Origin: / Country of Destination: /

SUMMARY OF TEST RESULTS

The mechanical hazards requirements of ASTM F963-17, “Standard consumer safety specification
for toy safety”.
The labeling requirements of ASTM F963-17, “Standard consumer safety specification for toy
safety”.
The flammability requirement of solids under ASTM F963-17 section 4.2 according to Annex A5,
"Flammability testing procedure for solids and soft toys".
Soluble Heavy Metals Content in Substrate - ASTM International Standard ASTM F963-17,
Section 4.3.5.2(2)(b)
Total Lead in Substrate Material - ASTM International Standard ASTM F963-17, Section

4.3.5.2(1) for Total Lead Content in Substrate Material

Note:

CONCLUSION

PASS

PASS

PASS

PASS

PASS

The tested part of the sample was specified by client.
The test conclusion was given based on the results of tested part.

If there are questions or concerns on this report, please contact the following persons:

[phone]

Jane Ye Seb Wang

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

2 OF 12

Sample Description Assigned by Laboratory:

Note:

g = gram(s)

% = percentage

mcg = microgram(s)

1 mg/kg = 0.0001%

mg/kg = milligram per kilogram

“<” = less than

mg/L = milligram per litre

“>” = Greater than

g/kg = gram(s) per kilogram

Req. = Requirement

MDL = Method Detection Limit

“-” = Not Regulated

ND = Not Detected (< MDL)

NA = Not applicable

EX = Exempted

Test Item Description

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

white paper with multi color printing /glue

grey plastic with silvery coating

black plastic/transparent with silvery plastic /glue

red plastic with white printing

white paper with multi color printing /glue

white paper with black printing /glue

green soft plastic with black printing

red soft plastic with black printing

black plastic
black plastic

black plastic
black plastic

transparent plastic

brown soft plastic

yellow soft plastic

silvery metal

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

3 OF 12

Photo of the Submitted Sample

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

4 OF 12

24211280195

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

5 OF 12

TEST RESULT

APPROPRIATE AGE GRADE DETERMINATION

The Appropriate Age Grade is determined with reference to the Age Determination Guidelines of the Consumer

Note :

The most stringent age grade from the Labeled Age Grade and the Appropriate Age Grade will be used for
testing.

Note :

If the client does not specify an age grade for testing or request BVCPS to determine an appropriate age
grade, the labeled age grade will be used for testing.

USE AND ABUSE TESTS

The samples were undergo the tests in accordance with section 8.6 through 8.16, whichever is applicable

Product Safety Commission (CPSC); and the ASTM F963-17, "Standard Consumer Safety Specification on Toy
Safety". Annex A1

Test Test Parameters Standard Reference

Drop 10 x 4.5 ft 1500.51(b)

Torque 2 in-lbs 1500.51(e)

Tension 10 lbs 1500.51(f)

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

6 OF 12

TEST RESULT

I.The mechanical hazards requirements of ASTM F963-17, “Standard consumer safety specification for toy safety”.

PHYSICAL AND MECHANICAL HAZARDS (ASTM F963-17)

Section Requirement Result

4.1 Material Quality

4.3.7 Stuffing Materials

4.5 Sound-Producing Toys

4.6 Small Objects

4.7 Accessible Edges

4.8 Projections

4.9 Accessible Points

4.10 Wires and Rods

4.11 Nails and Fasteners

4.12 Plastic Film

4.13 Folding Mechanisms and Hinges

4.14 Cords, Straps and Elastics

4.15 Stability and Over-Load Requirements

4.16 Confined Spaces

4.17 Wheels, Tires, and Axles

4.18 Holes, Clearances and Accessibility of Mechanisms

4.19 Simulated Protective Devices

4.20 Pacifiers

4.21 Projectile Toys

4.22 Teethers and Teething Toys

4.23 Rattles

4.24 Squeeze Toys

4.25 Battery-Operated Toys

4.26 Toys Intended to be Attached to a Crib or Playpen

4.27 Stuffed and Beanbag-Type Toys

4.30 Toy Gun Marking

4.32 Certain Toys with Nearly Spherical Ends

4.34 Small Balls

4.35 Pompoms

4.36 Hemispheric-Shaped Objects

4.37 Yo Yo Elastic Tether Toys

4.38 Magnets

M

N/A

M

N/A

M

M

M

M

M

M

N/A

N/A

M

N/A

M

M

N/A

N/A

N/A

N/A

N/A

N/A

M

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

7 OF 12

PHYSICAL AND MECHANICAL HAZARDS (ASTM F963-17)

M = Meet NM = Not Meet N/A = Not Applicable R = Refer to Comment Section

Section Requirement Result

4.39 Jaw Entrapment in Handles and Steering Wheels

4.40 Expanding Materials

N/A

N/A

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

8 OF 12

TEST RESULT

II.The labeling requirements of ASTM F963-17, “Standard consumer safety specification for toy safety”.

LABELING AND INSTRUCTIONAL REQUIREMENT (ASTM F963-17)

M = Meet NM = Not Meet N/A = Not Applicable R = Refer to Comment Section

Section Requirement Result

5.4 & 5.3 Aquatic Toys

5.5 & 5.3 Crib and Playpen Toys

5.6 & 5.3 Mobiles

5.7 & 5.3 Stroller and Carriage Toys

5.8 & 5.3 Toys Intended to be Assembled by an Adult

5.9 & 5.3 Simulated Protective Devices

5.10 & 5.3 Toys with Functional Sharp Edges or Sharp Points

5.11 Small Objects, Small Balls, Marbles and Balloons (16 CFR 1500.19)

5.12 Toy Caps (16CFR1500.86)

5.13 Art Materials (16 CFR 1500.14(b)(8))

5.15 Battery-Operated Toys (exclude 5.15.1 and 5.15.2)

5.15.1 & 5.3 Battery-Powered Ride-On Toys

5.15.2 & 5.3 Button or Coin Cell Batteries

5.16 Promotional Materials

5.17 & 5.3 Magnets

6.1 Definition and Description

6.2 Crib and Playpen Toys

6.3 Mobiles

6.4 & 5.3 Toys Intended to be Assembled by an Adult

6.5 Battery-Operated Toys

6.6 Battery-Powered Ride-On Toys

6.7 Toys in Contact with Food

7.1 Producer’s Name and Address

7.2 Battery-Powered Ride-on Toys

N/A

N/A

N/A

N/A

M

N/A

N/A

N/A

N/A

N/A

M

N/A

N/A

M

N/A

M

N/A

N/A

M

N/A

M

N/A

M

M

III.The flammability requirement of solids under ASTM F963-17 section 4.2 according to Annex A5, "Flammability
testing procedure for solids and soft toys".

FLAMMABILITY (16 CFR SECTION 1500.3(c)(6)(vi))

Requirement Test Method Reference Findings

Burn rate no greater than 0.1 of an inch per

second

16 CFR 1500.44 Did not ignited

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

9 OF 12

TEST RESULT

IV. Soluble Heavy Metals Content in Substrate - ASTM International Standard ASTM F963-17, Section

Test Method: ASTM International Standard ASTM F963-17, Section 8.3.5 (Excluding 8.3.5.5(3)).

As = Arsenic, Ba = Barium, Cd = Cadmium,
Cr = Chromium, Hg = Mercury, Pb = Lead,
Sb = Antimony, Se = Selenium

mg/kg = milligrams per kilogram
< = Less Than

4.3.5.2(2)(b)

Analyte As Ba Cd Cr Hg Pb Sb Se

Max. Limit (mg/kg)

Analytical Correction

25 1000 75 60 60 90 60 500

60% 30% 30% 30% 50% 30% 60% 60%

Analyte As Ba Cd Cr Hg Pb Sb Se

Test Item Result (mg/kg)

1 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

2 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

3 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

4 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

5 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

6 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

7 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

8 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

9 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

10 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

11 <2.5 9.4 <5 <5 <5 <5 <5 <5 PASS

12 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

13 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

14 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

15 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

16 <2.5 <5 <5 <5 <5 <5 <5 <5 PASS

Conclusion

Note / Key : Detection Limit (mg/kg) :

As:2.5; others(Ba, Cd, Cr, Hg, Pb, Sb, Se): 5

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

10 OF 12

TEST RESULT

V.Total Lead in Substrate Material - ASTM International Standard ASTM F963-17, Section 4.3.5.2(1) for

Test Method:

ASTM International Standard ASTM F963-16, Section 8.3.1.1 and CPSC-CH-E1002-08.3 Standard
Operating Procedure for Determining Lead (Pb) In Non-metal Children’s Products

CPSC-CH-E1001-08.3 Standard Operating Procedure for Determining Lead (Pb) In Metal Children’s
Products

Note / Key :

Detection Limit (mg/kg) : 10

mg/kg = milligram(s) per kilogram

< = Less than

Total Lead Content in Substrate Material

non-metal

metal

Element: Lead (Pb)

Requirement: Maximum allowable limit: (mg/kg) 100 mg/kg Conclusion

Test Item Location Style Result (mg/kg)

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

<10

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

PASS

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

Refer to sample picture /

END

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

11 OF 12

Appendix

Additional Model

LAB NO.:(2421)128-0195

DATE:August 25, 2021

PAGE

:

12 OF 12

Note: The information in this Appendix is provided by client.Since the client was not able to provide the sample of additional Style,

above additional Style(s) hasn’t been tested, but only based on the guarantee letter provided by the client. Bureau Veritas­CPS takes no responsibility for any mistakes and the problems of product consistency caused by inaccurate and/or invalid
information submitted by the client. The client will take the responsibility of all discrepancy and risk.