FRC TACH P3 TPA600 User Manual
Document Number:
XE-TPA6PM-R0A
ENGINE MONITORING DISPLAY
TPA600 Rev170623
MODEL: TPA600
FIRE RESEARCH CORPORATION
www.reresearch.com
26 Southern Blvd., Nesconset, NY 11767
TEL 631.724.8888 FAX 631.360.9727 TOLL FREE 1.800.645.0074
1
TPA600 Rev170623
CONTENTS
Table of Contents
CONTENTS ................................................................................................................ 2
INTRODUCTION ...................................................................................................... 3
Overview ................................................................................................................ 3
Features .................................................................................................................. 3
Specications ......................................................................................................... 3
GENERAL DESCRIPTION ....................................................................................... 4
Components ........................................................................................................... 4
Controls and Indicators .......................................................................................... 4
INSTALLATION ........................................................................................................ 6
Install Display Module........................................................................................... 6
Install Buzzer ........................................................................................................ 6
OPERATION .............................................................................................................. 8
Transmission Temperature ..................................................................................... 8
Engine Hours ......................................................................................................... 8
PROGRAMMING .................................................................................................... 10
Program Access.................................................................................................... 10
WIRING .................................................................................................................... 12
Connectors and Cables......................................................................................... 12
List of Tables and Figures
Table 1. Error and Fault Warning Codes .................................................................... 9
Table 2. Program Functions ..................................................................................... 11
Figure 1. Controls and Indicators ............................................................................... 5
Figure 2. Display Module Mounting Dimensions ..................................................... 7
Figure 3. Wiring ....................................................................................................... 12
2
TPA600 Rev170623
INTRODUCTION
Overview
The Engine Monitoring Display is an all-in-one instrument panel with integrated
monitoring and display capabilities that saves valuable pump panel space. It combines
four different instruments in one waterproof unit. It provides both audible and visual
warning alarms if specied parameters go outside of set limits.
The Engine Monitoring Display has a 4-digit LED display for engine RPM and
3-digit LED displays for engine oil pressure, engine coolant temperature, and battery
voltage. During normal operation warning messages are displayed as they occur.
The Engine Monitoring Display receives input information form the J1939 CAN
bus.
Features
Non-Multiplexed Display Means No Flickering
Digital Engine RPM, Oil Pressure, and Coolant Temperature Displays
Battery Voltage Display with Low and Over Voltage Warnings
Automatically Adjusts to 12 or 24 Volt System
Programmable Parameters
Audible and Visual Warnings
LED Brightness Automatically Adjusts for Day or Night Operation
Transmission Temperature Displayed (When Available)
Specications
Display Module
Supply Power: 12/24 VDC/ Auto Detected
Supply Current: 1.5 Amps
Dimensions: 4.2" by 4.2" by 0.7"
Audible Alarm Buzzer
Volume: 95 dB
3
TPA600 Rev170623
GENERAL DESCRIPTION
The Engine Monitoring Display receives all input from the J1939 CAN bus.
Components
The Engine Monitoring Display consist of the following components:
Display Module
Buzzer
Controls and Indicators
All controls and indicators are located on the front of the control module. Refer
top Operation and Programming Sections for more information.
RPM Display
Shows the current engine RPM in bright red digits. It also shows error codes, stored
data, and program features.
OIL PRESSURE Display
Shows the engine oil pressure in bright red 0.4" digits.
ENGINE TEMP Display
Shows engine coolant temperature in bright red 0.4" digits. (Shows transmission
temperature when selected.)
VOLTAGE Display
Shows the battery voltage in bright red 0.4" digits.
When in the information scroll mode this display shows system and options information.
MENU Button
The MENU button is used to show the transmission temperature if it is available.
It is also used to access program features. (Transmission temperature is shown in the
ENGINE TEMP display.)
SILENCE Button
The SILENCE button is to de-activate the audible warning alarm. It is also used
to access program features.
4
Loading...