Frap Tools 333, F-3330-SM, CGM User Manual

!

333

PRO AUDIO SUM & DISTRIBUTION

333

1. SAFETY & WARRANTY! 2"

2. WHAT IS 333! 3"

3. CONNECT THE POWER! 3"

3.1. Warm-up and working temperature 3

4. MOUNTING THE MODULE! 3"

5. FEATURES! 4"

6. FLOW CHART! 5"

7. TECHNICAL DETAILS! 6"

8. QUALITY CONTROLS! 6"

9. WHAT’S IN THE BOX! 6

1. SAFETY & WARRANTY

This product is covered by the Frap Tools srls (hereinafter “Frap Tools”) warranty, for two (2) years following the date of purchase.
This warranty covers any defect in the manufacturing of this product. This warranty does not cover any damage or malfunction
caused by incorrect use as described in the following instructions.

The warranty covers replacement or repair, as decided by Frap Tools. Please contact customer service at [e-mail] for a
return authorization.

Frap Tools warrants that your new Frap Tools product, when purchased at an authorized Frap Tools dealer, shall be free of defects in
materials and workmanship for a period of two (2) years from the original date of purchase. Please contact Frap Tools for warranty
and service outside of Europe. During the warranty period, Frap Tools shall, at its sole option, either repair or replace any product
that proves to be defective upon inspection by Frap Tools. Frap Tools reserves the right to update any unit returned for repair and to
change or improve the design of the product at any time without notice. This warranty can be transferred to anyone who may
subsequently purchase the product provided that such transfer is made within the applicable warranty period and Frap Tools is
provided with all of the following items:

•

all warranty registration information for the new owner;

•

proof of the transfer within thirty (30) days of the transfer purchase, and a photocopy of the original sales receipt.

Warranty coverage shall be determined by Frap Tools in its sole discretion. This is your sole warranty. Service and repair of Frap
Tools products are to be performed only by Frap Tools or an authorized service company. Unauthorized service, repair or
modification will void this warranty.

Please follow the given instructions for use of the device because this will guarantee correct device operation. Due to the fact that
these instructions also include indications concerning Product Liability, it is absolutely imperative that they be read carefully. Any
claim for defect will be rejected if one or more of the following points is not observed. Disregard of the instructions can void the
warranty.

The device may only be used for the purpose described in this operating manual. Due to safety reasons, the device must never be
used for purposes not described in this manual. If you are not sure about the intended purpose of the device please contact an
expert or Frap Tools at the email address above.

Do not use or store the device in humid places. Avoid contact with any kind of liquid.

Do not touch any component of the device when it is power or connected to any power source.

Do not place the device on unstable carts, stands, tripods, tables, or other surfaces, or on surfaces which are not perfectly plane.
This may cause the device to fall which could result in human injury, property damage and/or improper functioning of the device
itself.

The device is designed for use only when safely and tightly mounted in a proper eurorack case, made of non flammable materials. If
you are not sure about the intended purpose of the device please contact an expert or Frap Tools at the email address above.

Do not ever leave the device switched on when not in use.

To prevent fire, never place any type of candle, or fire, or other source of heat on or near the device.

Transport the device only in the original box with original packaging or when safely and tightly mounted in a proper eurorack case,
and handled with care. Never let the device fall or topple. Make sure that during transport and while in use the device and its case,
have a proper stand and does not fall, slip or turn over because of potential human injury to persons and/or property damage. Any
damage from physical abuse such as dropping the unit, impact from hard objects or damage to external components as a result of
negligence will void this warranty.

Never subject the device to temperatures above +40°C or below 0°C. Before operation, also verify operating temperature ranges of
all the modules and the power boards in use. Do not keep or leave the case that hosts the device, or the device itself near heat
sources.

Any modification must be carried out only by Frap Tools or an authorized service company. The device may not be modified in any
way by any parties not expressly authorized by Frap Tools. Any repair, modification, tampering, or attempted repair made by
unauthorized personnel will void this warranty.

Frap Tools can not be held responsible in any way for problems to persons or property or to the device itself, if the device is installed
improperly, or if it is improperly used, maintained, or stored.

Any device shipped to Frap Tools for return, exchange, warranty repair, update, or examination must be sent in its original
packaging! Any other deliveries will be rejected. Therefore, you should keep the original packaging, and any technical
documentation or manual provided. The device must be shipped only with the original packaging. As specified on the product box,
this box is not intended for shipment: if you bought the device directly at a physical reseller's shop, you should put the device in the
original packaging and put the packaging in a proper larger box with proper packaging destined for shipping. If you received the
device via carrier or any post service, it should have come with a proper double box packaging.

All non-warranty services are subject to a minimum fee of €50.00+VAT (within the European Union). The customer must pay for
shipping to Frap Tools, Frap Tools will cover return shipping costs.

It is important to note that the front panel of the 333 module may get warm, and may warm up the case where it is mounted. Please
do not be alarmed, as this is normal and is part of its standard operation.

Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire.
Immediately unplug the equipment and contact your dealer or Frap Tools at the address above for advice.

user manual rev 2 November 2017

Page ! of !2 6