Franklin & Ben EMPIRE ROCKER Instruction Manual
EMPIRE ROCKER
Instrucon Manual
revised 24DEC2012
Congratulations!
You are now the owner of a Franklin & Ben
product...a line of modern baby furniture that
redefines the nursery. Franklin & Ben products
are designed with both style and functionality
in mind, and we hope it becomes a source of
pleasure for you and your family. Quality material,
workmanship and pride have gone into these
products. Proper assembly is important to
ensure a safe and comfortable end result for
your baby. Please read all instructions before
assembly, and keep instructions for future use.
1
The Product and Manufacturing Process:
Franklin & Ben products are made from sustainable
woods wherever possible and also from highquality wood veneers. The primary material
used in our products is Paulownia wood
which is harvested from plantations and
renewed every 10-12 years. Zero-grade MDF,
containing well below the regulated limit of
formaldehyde, is used sparingly in components
of our products to achieve our signature
carvings and single board slat cutouts. All
paints, finishes and glues are low-VOC. Our
products are tested on a frequent basis to
ensure that all coatings and finishes comply
with U.S. and Canadian metals requirements.
Each Franklin & Ben product is a unique piece
crafted largely by hand. We use a specialized
machinery process to create our hallmark
carvings and each piece is constructed and
lacquered by hand. Our lacquering process
involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Franklin & Ben products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our products
and our use of solid woods, each piece is
unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural characteristics
are inherent in wood, are not considered
manufacturing defects and do not merit
replacements.
Maintenance and Cleaning:
To preserve the hand-crafted quality of
Franklin & Ben furniture, we recommend using
a cotton cloth and a non-toxic cleaner. Periodic
polishing or oiling on wood stains will help to
maintain the rich wood tones. For the leather chair,
use a soft and dry cloth to clean the chair for
regular maintenance. If the chair is stained, wipe
up the stain with a dry cloth quickly, or use a small
amount of leather cleaner on a soft sponge or
cloth, and wipe the affected area gently.
If your child is teething, some furniture’s finish
may be affected. Be assured that our lowVOC lacquers, finishes and glues comply with
applicable regulations and standards. Touch
up kits and replacement parts are available
for purchase upon request by contacting
Franklin & Ben at:
323. 728. 8988
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Franklin & Ben. For
any questions or assistance, please contact
us at 323. 728. 8988. For additional information
on our Purchase Terms and Conditions, please
visit www.themdbfamily.com. Your authorized
Franklin & Ben retailer will also be happy to
assist you.
Important Note:
2
WARNING
!
• Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.
• Read all instructions before assembling this
product.
• Keep instructions for future use.
• FALL HAZARD – To prevent death or serious
injury, always keep child within arm’s reach.
• Check this product for damaged hardware,
loose joints, missing parts or sharp edges before
and after assembly and frequently during use.
DO NOT use this product if any parts are missing,
damaged or broken. Contact Franklin & Ben,
Inc. for replacement parts and instructional
literature if needed. DO NOT substitute parts.
• Assembly tool required: Phillips screwdriver
(not included).
• Tighten all screws securely at each step of the
instructions. Check frequently to be certain
they remain tight and secure.
• If refinishing, use a non-toxic finish specified for
children’s products.
•This product contains small parts. Keep small
parts out of children’s reach during assembly.
•Properly discard all packaging materials after
assembly is complete.
3
Loading...