Franke Foodservice M 2M HD AS Installation Manual
SINFONIA 2-STEP
M 2M HD AS
M 3M HD AS
1” minimum Clearance
On Sides and Rear of
Machine
18” wide
10” of clearance
recommended
above grinder
(5” minimum)
31”
high
Cabinet
3/8” Braided Stainless
Steel Cold water Supply Line
Water Filter
Supplied wtih
Espresso Machine
16mm (3/8”)
Vented Drain
Water and Drain within 5’
Floor Drain
1/2”
2
Diameter Hole
for Utility Lines
Receptacle Within 3’
Plug is included with
machine.
11.5”
All Electrical and Plumbing
Must meet Local Codes
Please Refer to Specification
Sheets for Your Machine
Receptacle Required
For Espresso
6-50R
Rev 8/10
Unit Height Width Depth Ship weight Voltage/Phase/Cycle Wattage Amp Load Amp Circuit Plug Water line Water hardness Drain
Espresso
Due to continuous product development, Franke Foodservice Systems, Inc., reserves the right to make changes in design and specifications without prior notice.
Franke Coffee Systems, N.A.
800 Aviation Par kway
Smyrna, TN 37167 USA
Tel +1 800 310 5710
Fax +1 615 793 5940
email: info.fcsna @franke.com
www.franke-cs.com
31”
780mm
18”
450mm
24”
600mm
200 lbs
91 kg
208/1/60 6300 30 A 50 A
NEMA
6-50P
G 3/8” 1-5 gpg
16mm ID
vented
Loading...