Franke Quadra FDQ 907 XS User Manual

1

QUADRA

FQD907XS 9925119 630004570

TECHNICAL DATA PAGE 2
DRAWING PAGE 3
CONTROL FUNCTIONS PAGE 4
LIST SPARE PARTS PAGE 6
ESPLODED VIEW SF1.720.1 D04-700-598-716.1
K07-700.1

PAGE 8

KEY WIRING DIAGRAM PAGE 12
WIRING DIAGRAM 436002875 AB5_22 PAG 13

2

CONTROL

ELECTRONIC PUSH- BUTTONS 4 SPEED + INTENSIVE+ DELAY TIMER+ TO SET UP THE MOTOR TO A SUCTION SPEED AT 100
M3/H LASTING 10 MINUTES EVERY HOUR+ TURNS LIGHT ON AND OFF AT REDUCED INTENSITY.

Electr. Supplì
cord mm

2100 mm

M3/H

760 (IEC 61591) 950 ( TEST WITH OUTLET AIR FREE)

Connection
rating
(w)dbA

390
66

Current (A)
Frequency

220-240

50-60 HZ
Plug type SCHUKO
Isolation class II
Motor

Motor powewr absorbed

I speed
II speed
III speed
IV speed

90

165

205

245

330 INTENSIVE
Illumination Nr 3 halogen lamps x 20 w = total 60 w
Filtering Metal
Charcoal filter

9925203 OPTIONAL
No return air

flap

NO

3

4

Control board

Key Function Display
A Switches the extractor motor on and off at the

latest selected speed

Indicates the selected speed.

B Decreases the suction speed.
C Increases the suction speed.
D By pressing this key it is possible to activate the

intensive speed from any previously selected
speed. The intensive speed can be activated even
when the motor is OFF. This speed has been
timed at 10 minutes. After that time the system
activates automatically the latest selected speed.
This function is suitable for cooking conditions
when vapours and smells are of the utmost
emission.

HI appears. The spot down on the right side flashes
once a second.

E By pressing this key it is possible to set up the

motor to a suction speed at 100 m3/h lasting 10
minutes every hour. After this the motor switches
off automatically. When the filter saturation is
going on it is possible to reset the alarm by
pressing this key for about 3 seconds. The
indication is visible only when the motor is off.

Indicates the 24-function. The spot down on the right
side flashes and the motor is on.
Once the process is finished the previous indication
disappears:
FF Indicates that the metal grease filters
saturation alarm has been triggered, and the filters
need to be washed. The alarm is triggered after 100
working hours.
EF Indicates that the charcoal filter saturation
alarm has been triggered, and the filter has to be
replaced; the metal grease filters must also be
washed. The charcoal filter is triggered after 200
working hours.

F By pressing this key it is possible to set the

delayed shutdown of the appliance to 30 minutes.
This function is suitable for a complete elimination
of the residual smells. It can be activated at any
position, and it is deactivated by pressing the key
again or by switching off the motor.

Indicates alternately the selected speed of the hood
and the time left before the hood shutdown. The
spot down on the right side flashes.

G Turns light on and off.
H Turns light on and off at reduced intensity.