Franke Medical and Laboratory Products BROCHURE

Medical and Laboratory Products

AN EXTENSIVE RANGE OF STANDARD PRODUCTS

Smart Hygiene Solutions.

Franke Sissons

Franke Sissons Ltd.....serving our customers for 225 years. Sustainability and longevity to support your business.

In 2009 Franke Sissons are 225 years old. The original Company was formed in 1784 as silversmiths in Sheffield, England
and during the past 225 years has gained an international reputation for manufacturing and supplying quality, well
designed and durable products for a wide range of commercial applications.

Franke Sissons are suppliers to many well known blue chip clients in the UK, Ireland and Worldwide including:

Asda and the Walmart Group
Marks and Spencer
Sainsburys
Warner Holidays
Youth Hostel Association
Astra Zenica
Wolseley Group
Saint Gobain Group
BSS Group
NHS Trusts
Unilever
ARUP

Franke Sissons products are covered in part or wholly by the following Approvals and Standards:

001

ISO9001:2000

Nightingale Architects
Lorne Stewart
Haden Young
Interserve
Balfour Kilpatrick
N G Bailey
Sheperd Engineering Services
British Airport Authority
Capita Percy Thomas Architects
Ministry of Defence
Midland Mainline
Emcor

HSBC
University of London
University of Leicester
Rugby Football Union
Scott Tallon Walker Architects
Skanska
Mitie Group
Briggs & Forrester
Crown House Engineering
Spie Matthew Hall
News International

Franke Sissons Ltd, Carrwood Road, Sheepbridge, Chesterfield S41 9QB, England
Tel [phone], Fax [phone], Email [e-mail], www.franke-sissons.co.uk, www.franke-ws.com

Franke have an extensive range of standard products
suitable for Hospital, Laboratory and Medical
applications. The Hospital products of sluice sinks,
plaster sinks, scrub-up troughs, sink bowls and tops
and combination sluice sinks are suitable for Hospital
wards, Accident and Emergency rooms, Operating

MEDICAL AND

LABORATORY

PRODUCTS

TETULA

Theatres, Nursing Homes and Doctor’s surgeries.

Product features:

Comply with HTM64 sanitaryware guidelines -

Comply with HTM63 laboratory furniture guidelines -

Sink tops available in 304 and 316 stainless steel material -

Full range of fittings for the sink and sanitaryware products -

Custom made hospital and laboratory products available, -

details on request

Description Page

Hand Wash Stations 6
HTM 64 Sinks 7-10
Sit on Sinks 11-12
HTM 63 Sinks 13
Laboratory Worktops and Sinks 14
Laboratory Cabinets 14
Inset Sinks 15

Description Page

Inset Sink Bowls 16-17
Hospital Disposal Sinks 18-19
Domestic Disposal Sinks 20
Janitorial Unit 21
Plaster Sinks 22
Scrub Up Troughs 23

An Extensive Range of Products

In addition to the range of sluice and sink products are an extensive range of stainless steel Grab Rails available

in a satin polished finish or white powder coated paint finish. All standard products are made from grade 304

(1.4301) stainless steel and comply with UK Department of Health Technical Memoranda (HTM) 63 and 64

guideline specifications.

Sissons developed many of the products in conjunction with the UK authorities to provide the most ideal

combination of cleanliness, function and durability for a medical environment. Special units are also manufactured

to suit particular site requirements and can be manufactured in grade 316 (1.4404) stainless steel material to

give extra acid resistance in laboratory installations. Floor and wall cupboards for laboratory use to be used in

conjunction with worktops and sinks have been manufactured for large pharmaceutical manufacturers.

No touch water controls are available that are fully compatible with the stainless steel products and suitable for

hospital, medical and laboratory applications. The unique Duomatic and Trimatic taps, for example, dispense water,

soap and disinfectant from the same spout with out the need to touch the product. Wall mounted no touch soap

dispensers suitable for disinfectants and no touch paper towel dispensers are also available.

A full range of stainless steel grab rails are also available for use in ward and toilet areas with specially made

rails available.

Recent Installations for Franke Sissons Hospital Products

Whiston and St Helen’s Hospitals -

Newcastle RVI -

Stepping Hill, Stockport -

Broadgreen Hospital, Liverpool -

Walsgrave Hospital, Coventry -

Portsmouth General Hospital -

Brentwood Community Hospital -

St Bartholomew’s Hospital -

Basildon Hospital -

Oxford Nuffield Hospital -

Astra Zenica Laboratories -

Unilever Laboratories, Bedford -

University College of Dentistry -

Wyeth Medical, Dublin -

Introduction to HTM 63 & 64

Health Technical Memoranda (HTM) are a series of documents “which provide specification
and design guidance on building components for health buildings which are not adequately
covered by current British Standards.”¹

The HTM 63 document covers fitted storage systems suitable for health buildings such
as cupboards, open storage units, shelves, drawer units and worktops. The document
recommends that worktops to be manufactured in either linoleum faced material, plastic
laminate faced material or stainless steel.

The recommendation to use stainless steel for plain worktops is where durability and
strength are the main performance criteria. For worktops requiring dished, sink bowls,
drainers and hopper units stainless steel is the recommended material where these
elements can be incorporated at an economical cost. The worktop profile required for all
materials has recommended front and rear radii and finished section sizes which can be
achieved in stainless steel using purpose made tooling.

HTM 63 AND

HTM 64

Copies of the most recent
copy of HTM documents can
be obtained from HMSO via
the web site:
www.tso.co.uk/bookshop
(HTM63 ISBN 0113212429,
HTM64 ISBN 0113217625).

The HTM 64 document covers sanitary products such as Urinals, WCs, Basins, Baths,
Plaster sinks, Scrub-up troughs and Disposal units. Certain products are recommended to
be made in ceramic material and others in stainless steel according to the application. The
recommendation to use stainless steel is, in some cases, due to the size and shape of the
unit would be unsuitable to be manufactured in ceramic. For other products, such as sinks
and bowls, stainless steel is the accepted material for this type of unit where durability and
strength are the main performance criteria.

The guidance given in the HTM 64 document is for ducted services and surface mounted
service installations. The document also includes details of recommended fixing heights,
material type and finishes and fittings for water and waste.

Other Information Sources

Health Technical Memoranda are available on the “design, installation and running of
specialised building systems”¹ and relating to HTM 63 and 64 are HTM 68 on duct and
panel assemblies and HTM 71 on materials management modular storage.

Additional information relating to Hospital and Medical fittings can be found in Health
Building Notes (HBN) which are “a series giving advice to project teams designing and
planning new buildings and adapting or extending existing buildings.”²

Health Guidance Notes (HGN) are also available which is “an occasional series of
publications which respond to changes in Department of Health policy or reflect changing
NHS operational management. Each (HGN) deals with a specific topic and is complimentary
to a related Health Technical Memoranda.”²

¹ extract from HTM 63 published by the HMSO, first prepared 1989.
² Department of Health Publications List 2002 available at: www.nhsestates.gov.uk/publications_guidance/

Picture / Diagram Code / Description
All dimensions in mm

6

Hand Wash Stations and Dispenser

Guardian Hand Wash Station

A hand wash station suitable for mounting onto a wall fixing sub frame to allow
access to services, manufactured from 1.2/1.5mm thick, grade 1.4301 (304)
stainless steel, satin polish finish. Bowl is supplied with a perforated waste
(32mm connection) and the rear panel is fitted with a water spout central to the
bowl. The spout is supplied connected to the knee operated valve positioned
below the bowl at the front of the unit. Flexible connections are provided for
completing the necessary plumbing arrangements. The top of the rear panel has
space for fitting soap and paper dispensers, information available on request.
The unit is hinged on the right hand side so that access can be achieved for both
plumbing and fitting to the wall. Two locks are provided, one at the top and one
at the bottom, which are supplied with a special key.

external: 640x585x1700
bowl: 450x400x245

G22055N

316 material

This product is also available manufactured in acid resistant 316 stainless steel
(1.4404 to BS EN 10088N)

Guardian Plus Hand Wash Station

A hand wash station suitable for mounting onto a wall fixing sub frame to allow
access to services, manufactured from 1.2/1.5mm thick, grade 1.4301 (304)
stainless steel, satin polish finish. Bowl is supplied with a perforated waste
(32mm connection) and the rear panel is fitted with a water spout central to
the bowl. The spout is supplied connected to the knee operated valve positioned
below the bowl at the front of the unit. Flexible connections are provided for
completing the necessary plumbing arrangements. The top of the rear panel has
space for fitting soap and paper dispensers, information available on request.
The unit is hinged so that access can be achieved for both plumbing and fitting to
the wall. Two locks are provided, one at the top and one at the bottom, which are
supplied with a special key. Similar to the model shown above but incorporates
a larger bowl.

external: 640x585x1700
bowl: 590x400x300

G22056N

316 material

This product is also available manufactured in acid resistant 316 stainless steel
(1.4404 to BS EN 10088N)

Paper Towel / Soap Dispenser Combination

Surface mounted paper towel and soap dispenser combination, manufactured
from grade EN 1.4301 (304) stainless steel - satin polish finish, material
thickness 1.2/1.5mm. The paper towel dispenser has a capacity of 300 - 400
towels depending on the type and their folding. Soap dispenser incorporates a
replaceable 1 litre container and is fitted with cylinder lock with Franke standard
key. Screws and dowels included.

Suitable for paper towels:
min: 240x85
max: 250x105
ideal: 250x95

396x134x304

STRX601

Extras:

FH68

Paper towels (168 pieces)

Picture / Diagram Code / Description
All dimensions in mm

7

HTM 64 Sinks - SK1 & SK2 Sink Units

SK1 Single Bowl Sink

A single bowl sink manufactured from 1.2mm thick, grade 1.4301 (304) stainless
steel, satin polish finish. The sink top is turned down on all four edges and
incorporates a wet area recess. The bowl is prepared for a 38mm waste outlet.

NOTE: It is not possible to fit an overflow. The sink top can either be mounted on
wall brackets or front leg supports - see extras listed below.

external: 600x600x218
bowl: 500x400x200

G22002N

Single bowl, no tapholes

G22002NT

Single bowl with 2 tapholes at 200mm centres

Note: Illustration shows unit fitted with
stainless steel brackets

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

SK2 Double Bowl Sink

A double bowl sink manufactured from 1.2mm thick, grade 1.4301 (304) stainless
steel, satin polish finish. The sink top is turned down on all four edges and
incorporates a wet area recess. The bowls are prepared for a 38mm waste outlet.

NOTE: It is not possible to fit an overflow. No tapholes are provided therefore
any taps to be fitted must be mounted onto the wall. The sink top can either be
mounted on wall brackets or front leg supports - see extras listed below.

external: 1200x600x218
bowl: 500x400x200

G22004N

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Note: Illustration shows unit fitted with
stainless front leg supports

Picture / Diagram Code / Description
All dimensions in mm

8

HTM 64 Sinks - STA, STB Sink Units

STA Single Bowl/Single Drainer Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowl is prepared for a 38mm
waste outlet.

NOTE: It is not possible to fit an overflow. The sink top can either be mounted on
wall brackets or front leg supports - see extras listed below. This sink only requires
a pair of brackets or front leg supports. L or R refers to the handing of the drainer ie.
left or right when facing front of unit.

external: 1200x600x218
bowl: 500x400x200

G22006L/R

LH/RH drainer, no tapholes

G22006LT/RT

LH/RH drainer with 2 tapholes at 200mm centres

Note: All Illustrations show unit fitted with stainless steel front leg supports.
Photo shows sink with tapholes and lever taps, both of which are extra to the
standard product.

Note: All Illustrations show unit fitted with stainless steel front leg supports

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

STB Single Bowl/Double Drainer Sink

A single bowl/double drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowl is prepared for a 38mm
waste outlet.

NOTE: It is not possible to fit an overflow. No tapholes are provided therefore
any taps to be fitted must be mounted onto the wall. The sink top can either be
mounted on wall brackets or front leg supports - see extras listed below. This sink
only requires a pair of brackets or front leg supports.

external: 1800x600x218
bowl: 500x400x200

G22008D

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

9

HTM 64 Sinks - STC Sink Units

STC Double Bowl/Single Drainer Sink

A double bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowls are prepared for a 38mm
waste outlet.

NOTE: It is not possible to fit an overflow. No tapholes are provided therefore any
taps to be fitted must be mounted onto the wall. The sink top can be mounted on
wall brackets or front leg supports - see extras listed below. This sink requires three
brackets or three front leg supports. L or R refers to the handing of the drainer ie.
left or right when facing front of unit.

external: 1800x600x218
bowl: 500x400x200

G22010L/R

Extras:

G26527N

Three stainless steel front leg supports

G26528N

Three stainless steel cantilever brackets

F2068

38mm flush grated waste outlet

Note: All Illustrations show unit fitted with stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

10

HTM 64 Style Sinks - 600mm wide

Single Bowl/Single Drainer Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowl is prepared for a 38mm
waste outlet.

NOTE: It is not possible to fit an overflow. The sink top can either be mounted on
wall brackets or front leg supports - see extras listed below. L or R refers to the
handing of the drainer ie. left or right when facing front of unit.

external: 1000x600x200
bowl: 400x400x180

G22045L/R

Single bowl, single drainer, no tapholes

G22045LT/RT

Single bowl, single drainer, with 2 tapholes at 200mm centres

external: 1500x600x220
bowl: 500x400x200

G22046L/R

Single bowl, single drainer, no tapholes

G22046LT/RT

Single bowl, single drainer, with 2 tapholes at 200mm centres

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Note: All Illustrations show unit fitted with stainless steel front leg supports.
Photo shows sink with tapholes and lever taps, both of which are extra to the
standard product.

Note: All Illustrations show unit fitted with stainless steel front leg supports

Single Bowl/Double Drainer Sink

A single bowl/double drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowls are prepared for a 38mm
waste outlet.

NOTE: It is not possible to fit an overflow. The sink top can either be mounted on
wall brackets or front leg supports - see extras listed below.

external: 1500x600x220
bowl: 500x400x200

G22047N

Single bowl, double drainer, no tapholes

G22047NT

Single bowl, double drainer with 2 tapholes at 200mm centres

Extras:

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

F2068

38mm flush grated waste outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

11

Sit On Sinks - 600mm wide (316 & 304 Material)

Single Bowl/Single Drainer Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4404
(304) stainless steel, satin polish finish. The sink top is turned down on three
edges with an upstand at the rear and incorporates a wet area recess. Suitable
for mounting onto either a cabinet or stainless steel front leg supports and
cantilevered brackets - see extras below. The bowl is prepared for a 38mm waste
outlet only.

NOTE: It is not possible to fit an overflow. No tapholes are provided therefore any
taps to be fitted must be mounted onto the wall. L or R refers to the handing of the
drainer ie. left or right when facing front of unit.

external: 1000x600x200
bowl: 400x400x180

B50081L/R

Extras:

F2039

38mm vulcathene waste outlet and plug (No overflow)

F6010

Set of four cabinet fixing clips

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Taphole Positions

Single Bowl/Single Drainer Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on three
edges with an upstand at the rear and incorporates a wet area recess. Suitable
for mounting onto either a cabinet or stainless steel front leg supports and
cantilevered brackets - see extras below. The bowl is prepared for a 38mm waste
outlet and overflow. Two tapholes are provided positioned centrally behind the
bowl. L or R refers to the handing of the drainer ie. left or right when facing front
of unit.

external: 1000x600x200
bowl: 400x400x180

B20081L/R

Extras:

F2119

38mm waste, plug, chain and overflow

F6010

Set of four cabinet fixing clips

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

12

Sit On Sinks - 600mm wide, (316 & 304 Material)

Single Bowl/Double Drainer Sink

A single bowl/double drainer sink manufactured from 1.2mm thick, grade 1.4404
(316) stainless steel, satin polish finish. The sink top is turned down on three
edges with an upstand at the rear and incorporates a wet area recess. Suitable
for mounting onto either a cabinet or stainless steel front leg supports and
cantilevered brackets - see extras below. The bowl is prepared for a 38mm waste
outlet only.

NOTE: It is not possible to fit an overflow. No tapholes are provided therefore any
taps to be fitted must be mounted onto the wall. L or R refers to the handing of the
drainer ie. left or right when facing front of unit.

external: 1500x600x200
bowl: 400x400x180

B50074D

Extras:

F2039

38mm vulcathene waste outlet and plug (No overflow)

F6010

Set of four cabinet fixing clips

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Single Bowl/Double Drainer Sink

A single bowl/double drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on three
edges with an upstand at the rear and incorporates a wet area recess. Suitable
for mounting onto either a cabinet or stainless steel front leg supports and
cantilevered brackets - see extras below. The bowl is prepared for a 38mm waste
outlet only.

NOTE: With 2 tapholes provided at 180 centres. L or R refers to the handing of the
drainer ie. left or right when facing front of unit.

external: 1500x600x200
bowl: 400x400x180

B20074D

Extras:

F2119

38mm waste, plug, chain and overflow

F6010

Set of four cabinet fixing clips

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

13

HTM 63 Style Sit On Sinks - 650mm wide

Sit On Sinks with Radiused Front Edge

A range of sinks manufactured from 1.2mm thick, grade 1.4301 (304) stainless
steel, satin polish finish. Available in different formats, single bowl, double bowl,
single drainer and double drainer models - see illustrations opposite. Each sink
profile incorporates a radiused front edge together with a radiused internal corner
at the base of the upstand. All sink bowls are prepared for a 38mm waste outlet
which can be supplied as an extra.

All the sink units are suitable for mounting onto cabinets, front leg supports or
cantilevered brackets - see extras listed below. L or R after the code number refers
to the handing of the drainer ie. left or right when facing the unit.

external: 1000x650x220

G22048L/R

Single bowl, single drainer, no tapholes

G22048LT/RT

Single bowl, single drainer with 2 tapholes at 200mm centres

G22048L/R

G22049L/R

G22050L/R

external: 1200x650x220

G22049L/R

Single bowl, single drainer, no tapholes

G22049LT/RT

Single bowl, single drainer with 2 tapholes at 200mm centres

external: 1500x650x220

G22050L/R

Single bowl, single drainer, no tapholes

G22050LT/RT

Single bowl, single drainer with 2 tapholes at 200mm centres

external: 1500x650x220

G22051N

Single bowl, double drainer, no tapholes

G22051NT

Single bowl, double drainer with 2 tapholes at 200mm centres

external: 1800x650x220

G22052N

Single bowl, double drainer, no tapholes

G22052NT

Single bowl, double drainer with 2 tapholes at 200mm centres

external: 1800x650x220

G22053N

Double bowl, double drainer, no tapholes

G22053NT

Double bowl, double drainer with 2 tapholes at 200mm centres

bowl: 500x400x200

G22051L/R

G22052N

G22053N

Extras:

F2068

38mm flush grated waste outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

F6010

Set of four cabinet fixing clips

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

G26527N

3 stainless steel front leg supports
(for 1800mm long units, G22052N and G22053N)

G26528N

3 stainless steel cantilever brackets
(for 1800mm long units, G22052N and G22053N)

Picture / Diagram Code / Description
All dimensions in mm

14

Laboratory Worktops, Sinks and Cabinets

Worktops, Sinks and Hoppers for Laboratories

Specially manufactured worktops, sinks and hoppers can be manufactured from

1.2mm thick, grade 1.4301 (304) or 1.4404 (316) stainless steel, satin polish
finish. Worktops can be flat or incorporate a pressed recess suitable for most
applications. The illustrations opposite show examples but others are available on
request. Worktops in widths over 650mm are also available. All are supplied with
struts suitable for mounting onto cabinets. However the units can also be mounted
on either stainless steel cantilevered brackets or stainless steel front leg supports.

Profile of front turndown

Example of pressed worktop fitted
with sink bowl and sluice hopper

Profile of upstand

Example of plain worktop

Example of pressed worktop fitted
with sink bowl and drainer

Example of worktop with pressed
recess area

550, 600 & 650mm Wide Worktops for Laboratories

Specially manufactured worktops in widths of 550, 600 and 650mm can be
manufactured from 1.2mm thick, grade 1.4301 (304) or 1.4404 (316) stainless
steel, satin polish finish. Standard worktops are supplied with a flat top, however
worktops with a pressed recess can also be supplied.

NOTE: maximum length for a recessed top is approximately 1300mm. All are
supplied with a timber sub-frame suitable for mounting onto cabinets. However
the units can also be mounted on either stainless steel cantilevered brackets or
stainless steel front leg supports.

Wall cupboard fitted with 6mm toughened glass doors

Floor cupboard fitted with plain worktop

Other Laboratory Storage Equipment

Other specialised equipment required in laboratories can be made to order.
The photographs opposite show examples of specialised equipment which was
designed and manufactured to suit specific site conditions. Franke has extensive
experience in providing laboratory and medical fittings and furniture 1.4301 (304)
and 1.4404 (316) stainless steel to customers and clients requirements.

Picture / Diagram Code / Description
All dimensions in mm

15

Inset Sinks - 505mm wide, (316 & 304 Material)

Single Bowl/Single Drainer Inset Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4404
(316) stainless steel, satin polish finish. The sink top is turned down on all edges
and incorporates a rimmed edge and fixing rails. Fixing clips are provided for
insetting the sink into a worktop. The bowl is prepared for a 38mm waste
outlet only.

NOTE: L or R refers to the handing of the drainer ie. left or right when facing
front of unit.

external: 1015x505x200
bowl: 420x350x180
cut out size: 1000x490

B50085L/R

316 material, no tapholes, no overflow

B50085LT/RT

316 material with 2 tapholes at 200mm centres, no overflow

B50085LTO/RTO

316 material with 2 tapholes at 200mm centres, with overflow

Extras:

F2039

38mm vulcathene waste outlet and plug (no overflow)

F2120

38mm vulcathene waste, plug, chain (with overflow)

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Taphole positions

Single Bowl/Single Drainer Inset Sink

A single bowl/single drainer sink manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. The sink top is turned down on all edges
and incorporates a rimmed edge and fixing rails. Fixing clips are provided for
insetting the sink into a worktop. The bowl is prepared for a 38mm waste outlet
and overflow.

NOTE: It may be necessary to notch the worktop when an overflow is fitted. Two
tapholes are provided positioned centrally behind the bowl. L or R refers to the
handing of the drainer ie. left or right when facing front of unit.

external: 1015x505x200
bowl: 420x350x180
cut out size: 1000x490

B20085L/R

304 material with 2 tapholes at 180mm centres

B20085LT/RT

304 material with 2 tapholes at 180mm centres, no overflow

B20085LN/RN

304 material, no tapholes, no overflow

GO TO >

Extras:

F2119

38mm waste, plug chain and overflow

F2061

38mm waste and plug (no overflow)

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Picture / Diagram Code / Description
All dimensions in mm

16

Inset Sink Bowls (316 & 304 Material)

Inset Sink Bowls

Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) and
grade 1.4301 (304) stainless steel, satin polish finish. The top flange surround has
a rimmed edge and the bowl is supplied complete with fixing clips for mounting
into a worktop. Both bowls are prepared for a 38mm waste outlet and model

C20120N is also provided with an overflow hole.

NOTE: C50120N bowl is not pierced for an overflow.

external: 415x340
bowl: 380x306x180
cut out size: 390x315 with 107mm radius

C20120N

304 stainless steel

C50120N

316 stainless steel

Extras:

F2039

38mm vulcathene waste outlet and plug (No overflow) - for bowls in 316 material

F2119

38mm waste, plug, chain and overflow

Inset Sink Bowls

Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) and
grade 1.4301 (304) stainless steel, satin polish finish. The top flange surround has
a rimmed edge and the bowl is supplied complete with fixing clips for mounting
into a worktop. All bowls are prepared for a 38mm waste outlet but models

C20174N & C20175N are also provided with an overflow hole.

NOTE: C50174N & C50175N bowls are not pierced for an overflow.

external: 500x380
bowl: 380x306x180/250
cut out size: 470x350 with 105mm radius

C20174N

304 stainless steel, 180 deep bowl

C50174N

316 stainless steel, 180 deep bowl

C20175N

304 stainless steel, 250 deep bowl

C50175N

316 stainless steel, 250 deep bowl

Extras:

F2039

38mm vulcathene waste outlet and plug (No overflow) - for bowls in 316 material

F2119

38mm waste, plug, chain and overflow

Picture / Diagram Code / Description
All dimensions in mm

17

Inset Sink Bowls (316 & 304 Material)

Inset Sink Bowls

Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) and
grade 1.4301 (304) stainless steel, satin polish finish. The top flange surround has
a rimmed edge and the bowl is supplied complete with fixing clips for mounting
into a worktop. All bowls are prepared for a 38mm waste outlet but models

C20148, C20149 & C20150N are also provided with an overflow hole.

NOTE: C50148, C50149 & C50150N bowls are not pierced for an overflow.

external: 540x440
bowl: 500x400x180/250/300

C20148N

304 stainless steel, 180 deep bowl

C50148N

316 stainless steel, 180 deep bowl

C20149N

304 stainless steel, 250 deep bowl

C50149N

316 stainless steel, 250 deep bowl

C20150N

304 stainless steel, 300 deep bowl

C50150N

316 stainless steel, 300 deep bowl

Extras:

F2039

38mm vulcathene waste outlet and plug (No overflow) - for bowls in 316 material

F2119

38mm waste, plug, chain and overflow

Inset Sink Bowls

Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) and
grade 1.4301 (304) stainless steel, satin polish finish. The top flange surround has
a rimmed edge and the bowl is supplied complete with fixing clips for mounting
into a worktop. C20136L/R is supplied with a 38mm waste and standpipe overflow
strainer. L or R after the code number refers to the handing of the waste.

external: 648x495
bowl: 610x460x300
cut out size: 620x467 with 68mm radius

C20136L/R

304 stainless steel, 300 deep bowl

C50136L/R

316 stainless steel, 300 deep bowl

Extras:

F2039

38mm vulcathene waste and plug

Picture / Diagram Code / Description
All dimensions in mm

18

Hospital Pattern Disposal Sink - DUH

DUH Hospital Pattern Disposal Sink

A DUH hospital disposal unit manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel with a satin polish finish. The top is turned down on all four edges
and incorporates a wet area recess. Fitted with a sluice hopper at one end which
can be supplied with either top entry or duct mounted services. The hopper has a
110mm dia. outlet which can accept a P or S trap, available as an extra.

Stainless steel cisterns are available with stainless steel downpipes for surface
mounting installations. For installations where the cistern is duct mounted a plastic
cistern with plastic downpipe is available. Plastic cisterns have a 9 litres capacity
whereas the stainless steel cistern can be 6, 7 or 9 litre capacity and all are fitted
with a 13mm HP brass valve, plastic float and CP metal flushing lever handles.
The unit should only be fed from a cistern or tank water supply.

Unit can be mounted on either stainless steel cantilever brackets or stainless steel
front leg supports. Front leg supports give a working height of 900mm and have
adjustable feet which can be screwed to the floor for extra stability. L or R after the
code number refers to the handing of the drainer ie. left or right when facing front
of unit.

external: 1000x600x300
sluice hopper: 375/110x300

G22016L/R

Suitable for duct mounting

G22025L/R

Suitable for surface mounting

Photograph shows front leg
supports whereas the Illustrations
show cantilevered brackets
fitted

* When a top central
entry is supplied this
dimension is 270mm

Extras:

B4052

110mm stainless steel P trap

B4059

110mm stainless steel S trap

F3018

9 litre plastic cistern with brass waste

G20605N

6, 7 & 9 litre stainless steel cistern

B4215

Stainless steel downpipe

B3022

Plastic downpipe

G26523L/R

Pair of stainless steel cantilevered brackets

G26524L/R

Pair of stainless steel front leg supports

G26542N

Stainless steel outlet grating

Surface mounted

Duct mounted

Picture / Diagram Code / Description
All dimensions in mm

19

Hospital Pattern Disposal Sink - DUHS

DUHS Hospital Pattern Disposal Sink

A DUHS hospital disposal unit manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel with a satin polish finish. The top is turned down on all four
edges and incorporates a wet area recess. Fitted with a sluice hopper at one end
which can be suitable for either top entry or duct mounted services. The hopper has
a 110mm dia. outlet which can accept a P or S trap, available as an extra. A wash
up bowl is positioned next to the sluice hopper and is prepared for a 38mm waste
outlet. The wash up bowl does not have an overflow.

Stainless steel cisterns are available with stainless steel downpipes for surface
mounting installations. For installations where the cistern is duct mounted a plastic
cistern with plastic downpipe is available. Plastic cisterns have a 9 litres capacity
whereas the stainless steel cistern can be 6, 7 or 9 litre capacity and all are fitted
with a 13mm HP brass valve, plastic float and CP metal flushing lever handles. The
unit should only be fed from a cistern or tank water supply.

Unit can be mounted on either stainless steel cantilever brackets or stainless steel
front leg supports. Front leg supports give a working height of 900mm and have
adjustable feet which can be screwed to the floor for extra stability. L or R after the
code number refers to the handing of the drainer ie. left or right when facing front
of unit.

external: 1600x600x300
sluice hopper: 375/110x300
wash bowl: 500x400x200

G22018L/R

Suitable for duct mounting

G22018LT/RT

Suitable for duct mounting with 2 tapholes at 200mm centres

G22027L/R

Suitable for surface mounting

G22027LT/RT

Suitable for surface mounting with 2 tapholes at 200mm centres

Extras:

Illustrations show
front leg supports
fitted

B4052

110mm stainless steel P trap

B4059

110mm stainless steel S trap

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

* When a top
central entry is
supplied this
dimension is
270mm

Surface mounted

F3018

9 litre plastic cistern with brass waste

G20605N

6, 7 & 9 litre stainless steel cistern

B4215

Stainless steel downpipe

B3022

Plastic downpipe

G26523L/R

Pair of stainless steel cantilevered brackets

G26524L/R

Pair of stainless steel front leg supports

G26542N

Stainless steel outlet grating

G25147N

38mm waste, plug and chain

Duct mounted

Picture / Diagram Code / Description
All dimensions in mm

20

Domestic Services Disposal Sink - DUG

DUG Domestic Services Disposal Sink Wall Hung

A wall hung domestic services disposal unit manufactured from 1.2mm thick,
grade 1.4301 (304) stainless steel with a satin polish finish. Incorporating a
sluice hopper which is suitable for either top entry or duct mounted services.
The hopper has a 110mm dia. outlet which can accept a P trap, available as
an extra.

Stainless steel cisterns are available with stainless steel downpipes for surface
mounting installations. For installations where the cistern is duct mounted a plastic
cistern with plastic downpipe is available. Plastic cisterns have a 9 litres capacity
whereas the stainless steel cistern can be 6, 7 or 9 litre capacity and all are fitted
with a 13mm HP brass valve, plastic float and CP metal flushing lever handles.
The unit should only be fed from a cistern or tank water supply. The unit is fixed to
the wall using two cantilevered brackets, available as extras. Wall fixings are not
supplied.

external: 600x600/670x300
sluice hopper: 375/110x300

G22041N

600x600
Suitable for duct mounting

G22043N

600x670

Surface mounted Duct mounted

Suitable for surface mounting

Illustration shows duct mounted unit
G2 2041N - 600x600mm

Extras:

B4052

110mm stainless steel P trap

F3018

9 litre plastic cistern with brass waste

G20605N

6, 7 & 9 litre stainless steel cistern

B4215

Stainless steel downpipe

B3022

Plastic downpipe

G26542N

Stainless steel outlet grating

G26523L/R

Pair of stainless steel cantilever brackets

Picture / Diagram Code / Description
All dimensions in mm

21

Janitorial Unit

Janitorial Unit

Floor standing janitorial unit manufactured from grade 1.4301(304) stainless
steel, 1.2mm material thickness throughout except for lower bowl which is 0.9mm.
Supplied complete with monobloc mixer, 32mm flush grated waste (for top wash
bowl) and 38mm domed waste outlet (for lower bowl). The janitorial unit can be
fixed with 4 legs for floor standing or part wall hung/floor standing by using only
two of the front legs or alternatively can be fitted as a wall hung unit by using the
joggle strip provided.

external: 570x880
top bowl: 360x272x135
lower bowl: 380x300x180

G20050N

Extras:

F7927

Stainless steel bucket

G20051N

Combination waste kit for top and lower bowls

Picture / Diagram Code / Description
All dimensions in mm

22

Plaster Sink - PSH

PSH Plaster Sink

Plaster sink top manufactured from 1.2mm thick, grade 1.4301 (304) stainless
steel, with a satin polish finish whereas the bowl is from 1.5mm material. Available
in 1200 length the single bowl incorporates a plaster catcher sump which is
prepared for a 38mm waste. A flush grated waste is available as an extra. A plaster
catcher/basket and lid is supplied which fits into the sump in order to prevent
loose plaster from entering the waste and causing a blockage.

No tapholes are provided so any taps to be fitted must be wall mounted. Stainless
steel cantilevered brackets and stainless steel front leg supports can be supplied
as an extra. Both these types of supports rely on a strong wall fixing, particular
when brackets are fitted. No wall fixings are supplied. L or R after the code number

Illustration shows sink mounted
on cantilevered brackets

refers to the handing of the drainer ie. left or right when facing the unit.

external: 1200x600
bowl: 500x400x200/400

G22000L/R

Extras:

F2068

38mm flush grated waste outlet

G26523L/R

Pair of stainless steel cantilever brackets

G26524L/R

Pair of stainless steel front leg supports

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Plaster catcher
and lid

Picture / Diagram Code / Description
All dimensions in mm

23

Scrub Up Trough - SUH

SUH Scrub Up Troughs

A range of three surgeons scrub up troughs manufactured from 1.5mm thick,
grade 1.4301 (304) stainless steel, with a satin polish finish. All three models
are available with either a back inlet waste for duct wall mounting or a
conventional waste outlet in the base of the trough for surface mounting. Rear
waste incorporates a threaded section at the end of the tube for connection to
the services. When a bottom waste outlet is required it is prepared for a flush
grated waste, available as an extra - see below. The top and bottom areas of the
trough are fixed to the wall using joggle strips. Wall fixing screws and plugs are
not supplied. L or R after the code number refers to the handing of the waste outlet
ie. left or right when facing the front of the trough.

external: 750x400x470/500

G22012L/R

external: 1500x400x470/500

G22013L/R - rear outlet

external: 2250x400x470/500

G22014L/R - rear outlet

external: 750x400x470/500

G22029L/R

external: 1500x400x470/500

G22030L/R - bottom outlet

external: 2250x400x470/500

G22031L/R - bottom outlet

- rear outlet

- bottom outlet

GO TO >

Franke Water Controls,
Showers & Flushing
Valves Brochure - for

details of suitable taps

Models G22029/30 & 31L/R have waste in base of trough as
shown - Illustration shows a left hand waste

Extras:

Shrouded bottom outlet
Special height upstands - standard height is 100mm

F2068

38mm flush grated waste outlet for bottom outlet models only

FSI/08/2009

Franke Sissons Ltd
Carrwood Road
Sheepbridge
Chesterfield S41 9QB
England
Tel [phone]
Fax [phone]
Email [e-mail]
www.franke-sissons.co.uk
www.franke-ws.com

Smart

Hygiene

Solutions