Page 1
u ser m anual
c razy w heel
43 x 50mm
Titanium Ti5
Automatic
10atm
Sapphire
Page 2
I
I II III
1
1
2
3
how to wind your automatic watch : Setting the Time:
1
1
2
3
Your watch has an automatic movement
with a power reserve of more than two days,
if you do not wear it for a long time, it will stop.
To wind the watch barrel, please leave
the crown in its initial position I, turn it
clockwise and make about thirty turns
of crown
By wearing it frequently, your watch will be
constantly self-winded by the movements
of your wrist.
Pull out the crown to
position III (the watch stops).
Turn the crown until you
reach the correct time
Push the crown back into
position I.
Hour hand
Hour wheel
Second
Minute bridge
Please note
In order to set the time to the exact
second, must be pulled out when the
second hand is in position «60».
Once the hour and minute hands have been
set, must be pushed back into position I
at the exact second.
1
3
Page 3
I II
1
2
3
Setting the Date:
1
2
3
Pull out the crown to
position II (the watch
continues to run).
Turn the crown until the
correct date appears
Push the crown back into
position I.
Please note
The date can be changed during the date
changing phase between approx. 9:00 PM
and 12:00 PM; please note that the date must
be set to the date of the following day as in
this case the automatic date changing does
not occur at midnight.
Page 4
more informations at:
www.franckdubarry.com
Loading...