FrameCo Mat Master System Series, Mat Master 1260B System, Mat Master 1660B System, Mat Master 1060B System, Mat Master 860B System Owner's Manual & Operating Instructions

www.clubframeco.com

FrameCo - Australia

23 Ceylon Street
Nunawading VIC 3131
Phone: [phone]
Email: [e-mail]

FrameCo - Euro

Aylesbury
Bucks. UK HP20 1BH
Phone: [phone]
Email: [e-mail]

FrameCo - U.S.A.

PO Box 929
California USA 93446
Phone: [phone]
Email: [e-mail]

www.clubframeco.com

FrameCo

MAT MASTER

TM

SYSTEMS

#14225 BEVEL MOUNT CUTTERS

FrameCo - Australia

23 Ceylon Street
Nunawading VIC 3131
Phone: [phone]
Email: [e-mail]

FrameCo - Euro

Aylesbury
Bucks. UK HP20 1BH
Phone: [phone]
Email: [e-mail]

FrameCo - U.S.A.

PO Box 929
California USA 93446
Phone: [phone]
Email: [e-mail]

COPYRIGHT © 2008

MADE IN AUSTRALIA

#14201R Mat Master™ Model #201 Right Handed Bevel Cutter
#14201L Mat Master™ Model #201 Left Handed Bevel Cutter
#14209 Mat Master™ Rule 66cm (26”)
#14211 Mat Master™ Rule 101cm (40”)
#14212 Mat Master™ Rule 150cm (60”)
#14217 Mat Master™ L Rule - 101cm (40”)
#14225 Mat Master™ System 860B

82cm (32”) Cut, Hinged rail, Support. arm, Stops,#201 Bevel & Straight
Cutter and Speed Stop System

#14228 Mat Master™ System 1060B

100cm (40.5”) Cut, Hinged rail, Support. arm, Stops, #201 Bevel &
Straight Cutter and Speed Stop System

#14230 Mat Master™ System 1260B

122cm (47”) Cut, Hinged rail, Support. arm, Stops, #201 Bevel &
Straight Cutter and Speed Stop System

#14240 Mat Master™ Mat Guide Complete

Optional extra Mat Guide for 1260B, 1260-PRO & 1660B

#14233 Mat Master™ System 1660B

160cm (62”) Cut, Hinged rail, Support. arm, Stops, #201 Bevel &
Straight Cutter and Speed Stop System

#14290 Mat Master™ 90º Straight Cutter
#14718 Shadow Box Gauge
#14235 Border Width Extension Kit #1
#14233 Border Width Extension Kit #2
#14236 Mat Board Support Arms
#14237 Double Mat Spacer Block
#14238 Spacer Bar - 5 + 10cm
#14239 Spacer Bar - 15 + 20cm
#14422 Mount Embossing Tool
#14503 Coin Cutter
#14400 GrooveMaster V-Groover Kit
#14401 GrooveMaster Gauge
#14250 Mat Master™Blades x 10/Pk.
#14252 Mat Master

™

Blades x 50/Pk.

#14253 Mat Master

™

Blades x 100/Pk.

#14404 GrooveMaster

™

Blades x 10/Pk.

#14405 GrooveMaster

™

Blades x 50/Pk.

#14406 GrooveMaster

™

Blades x 100/Pk.

#14513 Mat Master

™

Circle Cutter Arm

#14514 Mat Master

™

Circle Cutter Arm & #201 Bevel Cutter

#14515 Mat Master

™

Circle Cutter attachment for GrooveMaster

™

#14516 Mat Master™Circle Cutter attachment for Pencil Holder

Mat Master™ Products

OWNERS MANUAL & OPERATING INSTRUCTIONS

Mat Master™ 860B System
Mat Master™ 1060B System
Mat Master™ 1260B System
Mat Master™ 1660B System

Welcome and thank you for purchasing a FrameCo Mat Master System.

Through these instructions we will endeavour to show you the benefits of
the system and how easy it is for you to cut and decorate your own mounts.

Revised: 1 October 2008

perfect bevels everytime

www.clubframeco.com

Speed Stop Pin

1 cm
graduations

A new approach for accurate settings. Sometimes it is difficult
to set the Border Width Guide exactly on the rule markings you
require. With the FrameCo Speed Stop it is easy to have
accurate and repeatable settings everytime. The pin holes are
set at 1cm or 1/2” spacings. For sizes between these settings
the measuring block is used. Set the pin into the hole opposite
the size required. Slide the stop along the guide until you feel
it touch the Pin, then lock the Border Width Mat Guide into
place. fig. 1

fig. 1 Slide the stop

along until it
reaches the
Pin

1/2” inch
graduations

Accurate settings are also required for double mats. The Double Mat
Spacer Block option allows you to make these settings easily for double
mats. The blocks are in metric sizes and have sides of different widths.
ie. 3mm - 1/8”, 4mm - 5/32”, 5mm - 3/16” and 7mm - 1/4”.
To cut a mat with an outside width of 6.5cm the Block and Pin is placed
in the 6cm locater hole with the block set on the 5mm side... thus a
total width of 6.5cm. The Block is especially valuable when cutting
double mats. It is easier to use the Speed Pin and Block to cut narrow
double mats rather than rely on settings made manually.

Double Mat
Measuring
Block

1 cm
graduations

1/2” inch
graduations

Double Mat Block
& Pin located on
Border Width Guide

Speed Stop System

Standard on the 860B, 1060B, 1260B & 1660B

Schematic Diagram

The Cutter can be used without installing the Right Support Arm.
The mount cutters come fully assembled apart from attaching the

Right hand Support Arm. The plastic bag contains two screws,
two nuts and one allen key.

Fit the two allen screws and nuts into the two holes in the end of
the Support Arm.

The two nuts fit into the slot located in the base, and the end of
the Support Arm fits neatly into the recess.

Align the Support Arm so that it is parallel to the border width
gauge, by placing a straight edge or ruler across the base.

Tighten the two screws with the allen key provided.
The Support Arm can be removed for storage, and to help

reposition it next time, mark its position with a pencil line.
It will then be easier to align when you reassemble the machine.

Setting up the Support Arm

Anodised Aluminum Base

Dual Locking Screws on 1060B

Slip Mat -inserted when bevel cutting

Bevel Cutting Head

Hinged Cutting Rail

Right Support Arm (not included in 560B)

Measuring stop

Arm Hinge

Border Width Gauge

Production Stop

Border Width Back Stop

Arm Hinge

Slip Mat Stop

Measure Indicator arrow

Attach screws and

nuts onto arm

Turn arm over and align

with aluminium base

Place arm in to base Use a metal ruler to

align arm parallel with

border width gauge

1

J

#14237 Double Mat Spacer Block

Mat Board Stop