Page 1
FHPD-V8T2BKA++
USCĂTOR DE RUFE CU POMPĂ DE CĂLDURĂ
Capacitate de încărcare: 8 kg
Clasa energetică: A++
Page 2
1
Înainte de a utiliza acest aparat, citiți cu atenție manualul de instrucțiuni și păstrați-l pentru consultări
ulterioare.
➔Uscător de rufe cu pompă de căldură
➔Manual de instrucțiuni
➔Certificat de garanție
•
veghere.
•
comerciale.
•
•
•
omercial.
• N
•
AVERTISMENT-
electrocutare!
F R A M !
1. INTRODUCERE
2. CONȚINUTUL PACHETULUI
3. AVERTISMENTE PRIVIND SIGURANȚA
Page 3
2
•
•
de un agent autorizat de service.
•
•
•
•
AVERTISMENT
•
• -
•
•
•
•
a-
•
•
•
•
• Când produsul e
• limentare
SIGURANȚĂ ELECTRICĂ
• Aparatul nu trebuie alimentat printr-un dispozitiv extern de comutare, cum ar fi un cronometru, sau
cu
poate exista riscul de elctrocutare.
•
•
•
Page 4
3
•
•
Un cablu de alimentare/ștecher deteriorat poate provoca incendiu sau poate provoca electrocutarea. Dacă
se deteriorează trebuie înlocuit. Acest lucru trebuie efectuat numai de personal califcat .
Pentru a evita riscul de incendiu sau șocul electric, nu utilizați prelungitoare, prize multiple sau adaptoare
pentru a conecta uscătorul la rețeaua de alimentare.
SIGURANȚA COPIILOR
• e, senzoriale
• Acest produs poate fi folosit de copii cu vârst
•
• Copiii s-ar putea bloca în aparat, ducând la riscul de deces.
•
•
•
•
•
•
•
Din cauza riscului de incendiu, următoarele articole și produse de spălare nu ar trebui să fie NICIODATĂ
uscate în uscător!
•
•
•
cerii sau produse chimice.
• Rufele care are reziduuri de spray-imilare.
•
•
•
Page 5
4
•
ATENȚIE:
INCENDIU: R290
Pericol de incendiu și de avarii!
ATENȚIE
ATENȚIE:
ATENȚIE
• Utilizarea în al
•
•
dr
•
•
ATENȚIE:
•
de scame.
•
timpul procesului de uscare.
•
IMPORTANT
.
•
INSTALAREA DEASUPRA MAȘINII DE SPĂLAT
ATENȚIE:
.
ATENȚIE: .
Page 6
5
•
furnizor
autorizat de service.
•
Tabelul corespunzător de instalare pentru mașina de spălat și uscătorul
de rufe
Uscător de rufe
(Adâncime)
Mașină de spălat
37-42
cm
42-45
cm
46-49
cm
50-56
cm
57-63
cm
52,5 cm
X ✓ ✓
✓ ✓ 56 cm
X X ✓
✓ ✓ 61 cm
X X X ✓ ✓
64 cm
X X X X ✓
•
-
stivuire.
Conectarea la fanta de evacuare a apei
Conectare la furtunul de evacuare a apei
1.
2.
3.
4. INSTALARE
Page 7
6
ATENȚIE:
IMPORTANT:
IMPORTANT:
Ajustarea picioarelor
•
pe picioare.
•
•
IMPORTANT
Conexiune electrică
ATENȚIE
•
prod
• e din utilizarea unui circuit
electric neadecvat
IMPORTANT
Instalarea sub un blat
•
Page 8
7
•
autorizat
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
5. DESCRIEREA PRODUSULUI
6. PREGĂTIREA RUFELOR
Page 9
8
•
tip de material. În acest
• i cele de dimensiuni mici
pentru a nu avea rufe umede.
IMPORTANT
potrivite pentru uscarea în us
Pregătirea rufelor de uscat
Pericol de explozie și de incendiu!
ATENȚIE:
• Hainele s-
• -.
Page 10
9
• r:
•
• lenjeriei de pat.
• i de programul
de uscare.
•
•
• din material sintetic. În caz contrar, vor face cute.
•
Capacitate de încărcare
IMPORTANT
imagine. Atunci când -ar
putea deteriora.
Rufe
Greutate încărcătură de uscat (gr)
de pat (dublu)
725
de
240
Prosop de baie
700
Prosop de mâini
225
190
de bumbac
200
Blugi
650
Pantaloni din material -
400
Tricou
120
Page 11
10
1. Buton de selectare a programului
2.
Indicator electronic și funcții suplimentare
7. PANOUL DE CONTROL
8. AFIȘAJ ELECTRONIC
Page 12
11
Simboluri de afișaj:
LED--ul Uscare se va aprinde.
În timpul programului
mult timp.
Sfârșit program
-
EXTRA DRY COTTON
8,0
Viteza de centrifugare(rpm)
1000
Durata (Min.)
179
Valoarea
60
CUPBOARD DRY COTTON
8,0
Viteza de centrifugare(rpm)
1000
Programme duration (Min.)
174
60
9. TABEL DE PROGRAME
Page 13
12
IRON DRY COTTON
8,0
Viteza de centrifugare(rpm)
1000
Durata (Min.)
148
60
CUPBOARD DRY SYNTHETICS
4,0
Viteza de centrifugare(rpm)
800
Durata (Min.)
74
40
IRON DRY SYNTHETICS
4,0
Viteza de centrifugare(rpm)
800
Durata (Min.)
64
40
DELICATE
2,0
Viteza de centrifugare(rpm)
600
Durata (Min.)
55
50
TIME DRYING
-
Viteza de centrifugare(rpm)
-
Durata (Min.)
-
-
BABY CARE
3,0
Viteza de centrifugare(rpm)
1000
Durata (Min.)
78
Valoarea
60
DUVET
2,5
Viteza de centrifugare(rpm)
800
Durata (Min.)
140
60
SPORT
4,0
Viteza de centrifugare(rpm)
800
Durata (Min.)
103
40
Page 14
13
MIX
4,0
Viteza de centrifugare(rpm)
1000
Durata (Min.)
112
60
WOOL REFRESH
-
Viteza de centrifugare(rpm)
-
Durata (Min.)
5
-
REFRESH
-
Viteza de centrifugare(rpm)
-
Durata (Min.)
10
-
EXPRESS 34'
1,0
Viteza de centrifugare(rpm)
1200
Durata (Min.)
34
50
SHIRTS 20'
0,5
Viteza de centrifugare(rpm)
1200
Durata (Min.)
20
50
Valori consum de energie
Program
(kg)
centrifugare
Valoarea
Valori consum
de energie
(kWh)
Cotton cupboard dry
8
1000
60%
1,88
Cotton iron dry
8
1000
60%
1,55
Synthetics cupboard dry
4
800
40%
0,93
0,5
1
Programul de uscare pentru depozitarea în dulap a articolelor din bumbac este programul standard de
energetic pentru a usca haine normale din bumbac ude.
Page 15
14
FUNCȚII AUXILIARE
Opțiune
Descriere
Nivel de uscare
afara
standard: 1, 2, 3. selectare, LED-ul nivelului de uscare se
va aprinde.
Delicate
delicate sunt uscate mai mult timp la o
Anti-
-
programului, etapa de anti- selectarea
- nou
buton pentru a anula sau tasta Start/Pause în
timp ce etapa anti- va
-a scurs,
compatibile
cu programul Pornire
continuu timpul de întârziere.
anulare
-a terminat. Pentru a
anula avertismentele, i butonul anti- timp de
fost
Timp uscare
a butonului (Timp uscare) timpul de uscare în mod continuu. Prin
butonului uscarea.
Blocare pentru copii
programului atunci când activa
tastele
- este
toate tastele vor fi dezactivate. Blocarea pentru copii se va dezactiva automat
la programului. La activarea/dezactivarea pentru copii,
un
avertisment sonor. Avertizare; când pentru
auzi un
apoi va fi stins.
Chiar butonul de program la alt program, programul
programului
în Apoi, selecta i porni programul dorit.
PORNIREA PROGRAMULUI
LED-
-
-ul de uscare se va aprinde.
Program
Descriere
Cotton Extra Dry
multe straturi, cum ar fi prosoape de bumbac,
Cotton Cupboard Dry
Page 16
15
Program
Descriere
Cotton Iron Dry
de bumbac pentru
vor fi umede.
Synthetics Cupboard Dry
dulap.
Synthetics Iron Dry
umede.
Delicate
Time Drying
Pentru a atinge nivelul de uscare necesar la o
programele de
timp de la 20 min. la 200 min. Indiferent de
Baby Care
gata de purtat.
Duvet
Acest program este folosit pentru a usca
pilotele.
Sport
Programul Sport este folosit pentru rufe de
tricouri la temperaturi mici.
Mix
material mixt, bumbac-sintetice care nu
Wool Refresh
blânde ale tamburului.
Refresh
Expres 34'
mare
minute.
Shirts 20'
2 -
20 minute.
Page 17
16
IMPORTANT
IMPORTANT-
Informații privind lumina tamburului:
• Acest produs in
•
•
IMPORTANT
CURĂȚAREA FILTRULUI DE SCAME
IMPORTANT
1.
2. -l scoate.
3.
4. -
10. CURĂȚARE ȘI ÎNGRIJIRE
Page 18
17
5.
6.
7.
8.
filtrul înainte de a-l instala din nou
GOLIREA REZERVORULUI DE APĂ
1.
2.
3. -
4.
IMPORTANT
IMPORTANT: Nu uitați să goliți rezervorul de apă după fiecare utilizare
CURĂȚAREA CONDENSATORULUI DE CĂLDURĂ
IMPORTANT
IMPORTANT: C-
Page 19
18
1.
2.
3.
4.
5.
6.
7.
AVERTISMENT:
CURĂȚAREA SENZORULUI DE UMIDITATE
În
1.
2.
3. -le.
IMPORTANT:
Page 20
19
IMPORTANT
AVERTISMENT
CURĂȚAREA SUPRAFEȚEI INTERIOARE A UȘII DE ÎNCĂRCARE
IMPORTANT: N
Marca
FRAM
Nume model
FHPD-V8T2BKA++
Înălțime
Min: 845 mm / Max: 855 mm*
Lățime
596 mm
Adâncime
609 mm
Capacitate (max.)
8 kg**
Greutatea netă (cu ușă din plastic)
45,4 kg
Greutatea netă (cu ușă din sticlă)
47,8 kg
Voltaj
220-240 V
Putere
1000 W
IMPORTANT
11. SPECIFICAŢII TEHNICE
Page 21
20
IMPORTANT-un mediu de laborator conform standardelor relevante.
ATENȚIE:
1.
pentru 8 g de refrigerent pentru asemenea echipamente. Pentru 150 g de propan, dimensiunea
ste de 18.75 m³.
2.
a acestuia poate duce la incendiu sau
conductele din circuitul refrigerentului.
Tip refrigerent: R290
Cantitate de gaz: 150 g
Pericol de exp
AVERTISMENT:
-distribuitorul sau un
furnizor autorizat de servicii.
PROBLEMĂ
MOTIV
SOLUȚIE
poate fi înfundat.
închise.
prea mare a temperaturii
camerei.
Ar putea fi un strat de
calcar pe senzorul de
umiditate.
umiditate.
Rufele pot fi rotite
insuficient.
12. DEPANARE
Page 22
21
PROBLEMĂ
MOTIV
SOLUȚIE
se simt, în general, mai
umede.
articolelor,
Este posibil ca programul
pentru tipul de rufe.
poate fi înfundat.
Rufele pot fi rotite
insuficient.
nu fie conectat.
-
poate fi pornit.
reglat
-
S-
-
fost
este în modul Standby
Blocarea pentru copii poate
copii.
-
S-
pentru a porni programul.
plin.
, s-
deteriorat.
Este posibil ca programul
pentru tipul de rufe.
pentru tipul de rufe.
scame
închidere.
plin.
Simbolul de
Furtunul de evacuare a apei
ar putea fi îndoit.
direct la fanta de evacuare a
evacuare a apei.
Furtunul de scame poate fi
murdar.
Page 23
22
PROBLEMĂ
MOTIV
SOLUȚIE
pornit.
Suportul filtrului poate fi
înfundat cu scame.
S-
filtrului de
scame.
poate fi înfundat.
filtrului este
probabil înfundat cu scame.
este probabil înfundat.
*Programul nu poate porni iar LED-ul de avertizare
LED-ul de avertizare pentru
tehnice.
Cod de eroare
E03 /
autorizat de service.
E04
cel mai apropiat agent autorizat de service.
E05
cel mai apropiat agent autorizat de service.
E06
cel mai apropiat agent autorizat de service.
E07
cel mai apropiat agent autorizat de service.
E08
alimentare.
când tensiunea este pentru intervalul de
13. AVERTISMENTE AUTOMATE DE DEFECȚIUNE ȘI SOLUȚII
Page 24
23
FISA DE PRODUS USCATOR FHPD-V8T2BKA++
Brand
FRAM
Model
FHPD-V8T2BKA++
8
Pompa de caldura
A++
Consum anual de energie (kWh)
235
Automat
1.88
Consumul de Energie al programului standard de bumbac la incarcare partiala
(kWh)
1.1
Consumul de energie în modul oprit pentru programul standard de bumbac la
O (W)
0.5
Consumul de energie în modul activ pentru programul standard de bumbac la
L (W)
1
Durata în modul activ (min)
N/A
Program de bumbac standard
(3)
-
T
dry
174
T
dry1/2
103
(Tt)
133
(4)
B
dry
81%
dry1/2
81%
t
81%
(5)
65
Încorporat
Nu
14. FIȘĂ PRODUS
Page 25
24
Informații privind ambalarea
SERVICE ȘI ASISTENȚĂ PENTRU CLIENȚI
originale.
-
otificare
DATE TEHNICE
baza de date EPR
za de date EPREL, folosind link-ul
https: //
produsul dumne-ul nostru web utilizând linkurile de mai jos:
Manuale de utilizare: www.framelectrocasnice.ro
Informatii referitoare la service: www.framelectrocasnice.ro
Page 26
25
F R A M
prealabil al companiei NETWORK ONE DISTRIBUTION.
Copyright © 2020 Network One Distribution. Toate drepturile rezervate.
www.framelectrocasnice.ro; www.framappliances.com; www.nod.ro
Acest produs este pro
Europene.
Importator: Network One Distribution
Str. Marcel Iancu, nr. 3-
Tel: +40 21 211 18 56, www.framelectrocasnice.ro , www.nod.ro
www.framelectrocasnice.ro
Page 27
26
FHPD-V8T2BKA++
HEAT PUMP DRYER
Loading capacity: 8kg
Energy class: A++
Page 28
27
Before using the appliance, please read carefully this instruction manual and keep it for future reference.
➔ Heat pump dryer
➔User manual
➔Warranty card
• This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children must not play with the appliance. Cleaning and user maintenance must not be made by children
without supervision.
• This tumble dryer is intended only for household and indoor use. The warranty will be void in case of
commercial use.
• Use this product only for laundry with a label that indicates it is suitable for drying.
• The manufacturer will not accept responsibility for damages resulting from incorrect use or transport.
• The service lifetime of your tumble dryer is 10 years. This is the period during which the spare parts
required for the tumble dryer to operate properly will be commercially available.
• Do not allow floor coverings to obstruct the ventilation openings.
• Installation and repair of the machine should only be made by an authorized repair agent. The
manufacturer cannot be held responsible for damages resulting from un-authorized repairs.
WARNING: Never spray or pour water onto the dryer to wash it! There is risk of electric shock!
Thank you for choosing this Fram product!
1. INTRODUCTION
2. YOUR PACKAGE CONTAINS
3. SAFETY INFORMATION
Page 29
28
• Leave at least 3 cm of space between the side and rear walls of the product and above if you plan on
placing your appliance under a worktop.
• Assembly / disassembly for under-counter installation if necessary must be done by an authorized service
agent.
• Before installation, check the product for visible damage. Never install or operate a damaged product.
• Keep pets away from the dryer.
• Fabric softeners or similar products should be used in accordance with the instructions.
• Remove all objects from pockets such as lighters and matches.
• The appliance must not be installed behind a lockable door, a sliding door, or a door with a hinge on the
opposite side to that of the tumble dryer, if it prevents the door from being fully opened.
WARNING: In the appliance enclosure or in the built-in structure, keep ventilation openings clear of
obstruction.
• Before contacting the local Authorized Service Provider for the installation of the dryer, check the
information in the user manual to make sure that the electrical installation and water outlet is suitable.
• If they are not, call a qualified electrician and a plumber to have the necessary adjustments made.
icity and
wastewater installation. Before installation, check the dryer for damage. If damaged, do not have it
installed. Damaged products may endanger your health.
• Install the dryer on a stable and flat surface.
• Run the dryer in a dust-free environment where the air ventilation is good.
• The clearance between the dryer and the floor should not be reduced with objects such as carpets, wood
or tape.
• Do not block the ventilation grills found on the plinth of the tumble dryer.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the
opposite side of the tumble dryer, in such a way that blocks the full opening of the tumble dryer door.
• Once the dryer has been installed, the connections must remain stable. When installing the dryer, make
sure that the rear surface is not leaning on anything (e.g., tap, socket).
• The operating temperature of the dryer is +5°C to +35°C. If operated out of this temperature range, the
performance of the dryer will be affected negatively and the product will be damaged.
• Be careful when carrying the product since it is heavy. Always wear safety gloves.
• Always install the product should be placed against a wall.
• The rear surface of the product should be placed against the wall.
• When the product is placed on a stable surface, use a water level to check if it is fully stable. If not, adjust
the feet until it becomes steady. Repeat this process every time you relocate the product.
• Do not place the dryer onto the power cable.
ELECTRICAL SAFETY
• The appliance must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by a utility.
• Do not touch the power plug with wet hands. Always pull the plug to unplug the product, otherwise,
there will be risk of an electric shock.
• Connect the dryer to a grounded socket with fuse protection. The earth connection must be installed by
a qualified electrician. Our company cannot be held responsible for damages/losses resulting from using
the dryer without an earth connection as required by local regulations.
• The voltage and the allowable fuse protection are indicated on the type of plate.
• Voltage and frequency values indicated on the type of plate must be equal to the mains voltage and
frequency value in your house.
• Unplug the dryer when it is not used for an extended period, and before installation, maintenance,
cleaning and repair, otherwise, the dryer may get damaged.
• The plug socket must be always freely accessible after installation. To avoid the risk or fire or electric
shock, do not use extension cords, multi sockets or adapters to connect the dryer to mains power.
Page 30
29
CHILDREN'S SAFETY
• This appliance is not intended for use by people (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• This appliance can be used by children aged from 8 years and above, and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children must not play with the appliance. Cleaning and user maintenance must not be made by children
without supervision.
• Do not leave children unattended near the machine.
• Children might lock themselves in the machine resulting in risk of death.
• Do not allow children to touch the glass door during operation. The surface becomes extremely hot and
may cause skin damage.
• Keep packaging material away from children.
• Poisoning and irritation may occur if detergent and cleaning materials are consumed or come into contact
with the skin and eyes.
• Keep cleaning materials out of the reach of children Electrical products are dangerous for children.
• Keep children away from the product while it is running.
• To prevent children from interrupting the dryer cycle, you can use the child lock to avoid any changes in
the running program.
• Do not allow children to sit/climb on or climb inside the product.
PRODUCT SAFETY
Due to risk of fire, the following laundry items and products should NEVER be dried in the dryer: • Do not
dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
• Cleaning cloths and mats that have residues of flammable cleaning agents or acetone, gas, patrol, stain
remover, turpentine, candle, wax, wax remover or chemicals.
• Laundry that has residues of hair sprays, nail polish remover and similar substances.
• Laundry on which industrial chemicals have been used for cleaning (such as chemical cleaning).
• Laundry that has any kind of foam, sponge, rubber or rubber-like parts or accessories. These include latex
foam sponge, shower caps, waterproof fabrics, fitted clothes, and foam pillows.
• Items with filling and damaged (parts or jackets). Foam protruding from these items might catch fire
during the drying process.
• Operating the dryer in environments that contain flour or coal dust may cause explosion.
ATTENTION: Underwear that contains metal reinforcements should not be put in the dryer. The dryer may
be damaged if metal reinforcements come loose and break off during drying.
FIRE: R290
Risk of fire and damage!
This product contains environmentally friendly but flammable R290 gas. Keep open flame and fire sources
away from the product
CORRECT USE
ATTENTION: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
ATTENTION: Make sure that pets do not enter the dryer. Check the inside of the dryer before using it.
Page 31
30
ATTENTION: Superheating of clothes inside the dryer can occur if you cancel the program or in the event of
a power failure whilst the dryer is running. This concentration of heat can cause self-combustion so always
activate the Refresh program to cool down or quickly remove all laundry from the dryer in order to hang
them up and dissipate the heat.
• Use the dryer only for household drying and to dry fabrics with a label that indicates they are suitable for
drying. All other uses are out of the scope of intended use and are prohibited.
• The warranty will be void in case of any commercial use.
• This appliance is designed to be used inside domestic residences only and should be placed on a straight
and stable surface.
• Do not lean against or sit on the door of the dryer. The dryer may tip over.
• To maintain a temperature that will not harm the laundry (e.g. to prevent the laundry from catching fire),
a cooling process starts after the heating process. After this, the program ends. At the end of the
program, always remove the laundry promptly.
ATTENTION: Never use the dryer without a lint filter or with a damaged lint filter.
• Lint filters must be cleaned after each use as indicated in Cleaning the Lint Filter.
• Lint filters must be dried after wet cleaning. Wet filters might cause malfunction during the drying
process.
• Lint accumulation must not to be allowed around the tumble dryer (not applicable for appliances
intended to be vented to the exterior of the building)
IMPORTANT: The clearance between the dryer and the floor should not be reduced with objects such as
carpets, wood or panel, otherwise, sufficient air intake cannot be ensured for the machine.
• Do not install the dryer in rooms where there is risk of freezing. Freezing temperatures negatively affect
the performance. Condensed water that freezes in the pump and hose may cause damage.
Installing on Top of a Washing Machine
ATTENTION: A washing machine cannot be placed on the dryer. Pay attention to the warnings below when
installing the dryer on a washing machine.
ATTENTION: The dryer can only be placed on washing machines that have a same capacity and above
• To use the dryer on the washing machine, a fixing part must be used between the two products. The
fixing part must be attached by an authorized Service Provider.
• When the dryer is placed on the washing machine, the total weight of these products may reach almost
150 kilograms (when loaded). Place the products on a solid floor that has a load bearing capacity!
Appropriate Installation Table for Washing Machine and Dryer
Dryer
Washing Machine
(Depth)
37-42 cm
42-45 cm
46-49 cm
50-56 cm
57-63 cm
52,5 cm
X ✓ ✓ ✓ ✓
56 cm
X X ✓ ✓ ✓
61 cm
X X X
✓
✓
64 cm
X X X
X
✓
In order to put the dryer machine onto the washing machine, a special stacking kit is required as
an optional extra. Please contact customer service to acquire. The assembly instruction will be
served together with the stacking kit.
Page 32
31
Connection to water outlet
In products with a heat pump unit, water accumulates in the water tank during the drying process. You must
empty the accumulated water after each drying process. Instead of periodically emptying the water tank,
you can also use the water drain hose provided with the product to directly drain the water outside.
Connecting the Water Discharge Hose
1. Pull and take out the end of the hose at the back of the dryer. Do not use any tools to take out the
hose.
2. Fit one end of the water discharge hose, which is provided with the product, to the slot from which
you have removed the hose.
3. Fix the other end of the water discharge hose directly to the water outlet or sink.
ATTENTION: The hose must be connected in a manner that it cannot be displaced. If the hose comes out
during water discharge, there might be flooding in your house.
IMPORTANT: The water discharge house must be installed at a height of 80 cm maximum.
IMPORTANT: The water discharge hose must not be bent between the outlet and the product, folded or
stepped over.
Adjusting the Feet
• For the dryer to work with less noise and vibration, it must be stable and balanced on its feet. Adjust the
feed to ensure that the product is balanced.
• Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT: Never remove the adjustable feet.
Electrical Connection
ATTENTION: There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special plug. This plug must be connected to an earthed
socket protected by a fuse of 16 Amperes as indicated on the type plate. The fuse current rating of the
power line where the outlet is connected must also be 16 amperes. Consult a qualified electrician if you
do not have such an outlet or fuse.
4. INSTALLATION
Page 33
32
• Our company cannot be held responsible for damages resulting from usage without earthing.
IMPORTANT: Operating your machine at low voltage values will shorten the service life and decrease the
performance of your machine.
Under Counter Installation
• Leave at least 3 cm of space between the side and rear walls of the product and the underside of the
worktop when installing your product under a counter.
• Assembly / disassembly under the counter if necessary must be done by authorized service.
1. Upper tray
2. Control panel
3. Loading door
4. Plinth
5. Plinth opening slot.
6. Ventilation grills
7. Adjustable feet
8. Plinth cover
9. Type plate
10. Lint filter
11. Drawer Cover
5. PRODUCT DESCRIPTION
Page 34
33
Sorting the Laundry to be Dried
• Follow the instructions on the labels of the laundry to be dried. Only dry items that have a
statement/symbol that indicates "they can be dried in a dryer".
•
• Do not dry thin, multi-layer or thick-layer fabrics together as they dry at different levels. For this reason,
dry clothes together that have the same structure and fabric type. This way, you can get an even drying
result. If you think that the laundry is still wet, you can select a time program for additional drying.
• Please dry your big (like duvets) and small sizes of laundries separately to not to have a damp laundry.
IMPORTANT: Delicate fabrics, embroidered fabrics, woolen/silk fabrics, clothes made of delicate and
expensive fabrics, airtight clothes and tulle curtains are not suitable for drying in the dryer.
Preparing the Laundry to be Dried
Risk of explosion and fire!
Remove all objects from pockets such as lighters and matches.
ATTENTION: The drum of the dryer and the fabrics may get damaged.
6. PREPARING THE LAUNDRY
Page 35
34
• The clothes may have become entangled during the washing process. Separate them from each other
before placing them in the dryer.
• Remove all objects in the pockets of the clothes and apply the following:
• Tie fabric belts, apron laces etc. to each other or use a laundry bag.
• Lock the zips, clasps and fasteners, do up the buttons of covers.
• To get the best drying result, sort the laundry according to the textile type and drying program.
• Remove clips and similar metal parts from the clothes.
• Woven goods such as t-shirts and knit clothes generally shrink in the first drying. Use a protective
program.
• Do not over-dry synthetics. This will cause creases.
• When washing the laundry to be dried, adjust the amount of softener according to the data from the
manufacturer of the washing machine.
Load Capacity
Follow the instructions in the "Program selection and consumption table. Do not load the product with more
laundry than the capacity values specified in the table.
IMPORTANT: It is not recommended to load the dryer with more laundry than the amount shown in the
figure. When overloaded, the drying performance of the dryer will decrease and the dryer and laundry might
be damaged.
Laundry
Dry load weight (gr)
Bedsheet (double)
725
Pillowcase
240
Bath Towel
700
Hand Towel
225
Shirt
190
Cotton Shirt
200
Jean
650
Fabric - Gabardine Trousers
400
T-shirt
120
Page 36
35
1. Program Selection Knob
2. Electronic indicator and additional functions
Electronic Indicator and Additional Functions
7. CONTROL PANEL
8. PROGRAM SELECTION KNOB
Page 37
36
Display symbols
EXTRA DRY COTTON
Load(kg)
8,0
Washing machine spin speed(rpm)
1000
Duration (Min.)
179
Approximate amount of remaining humidity %
60
CUPBOARD DRY COTTON
Load(kg)
8,0
Washing machine spin speed(rpm)
1000
Duration (Min.)
174
Approximate amount of remaining humidity %
60
IRON DRY COTTON
Load(kg)
8,0
Washing machine spin speed(rpm)
1000
Duration (Min.)
148
Approximate amount of remaining humidity %
60
CUPBOARD DRY SYNTHETICS
Load(kg)
4,0
Washing machine spin speed(rpm)
800
Duration (Min.)
74
Approximate amount of remaining humidity %
40
IRON DRY SYNTHETICS
Load(kg)
4,0
Washing machine spin speed(rpm)
800
Duration (Min.)
64
Approximate amount of remaining humidity %
40
DELICATE
Load(kg)
2,0
Washing machine spin speed(rpm)
600
Duration (Min.)
55
Approximate amount of remaining humidity %
50
9. PROGRAM SELECTION
Page 38
37
TIME DRYING
Load(kg)
-
Washing machine spin speed(rpm)
-
Duration (Min.)
-
Approximate amount of remaining humidity %
-
BABY CARE
Load(kg)
3,0
Washing machine spin speed(rpm)
1000
Duration (Min.)
78
Approximate amount of remaining humidity %
60
DUVET
Load(kg)
2,5
Washing machine spin speed(rpm)
800
Duration (Min.)
140
Approximate amount of remaining humidity %
60
SPORT
Load(kg)
4,0
Washing machine spin speed(rpm)
800
Duration (Min.)
103
Approximate amount of remaining humidity %
40
MIX
Load(kg)
4,0
Washing machine spin speed(rpm)
1000
Duration (Min.)
112
Approximate amount of remaining humidity %
60
WOOL REFRESH
Load(kg)
-
Washing machine spin speed(rpm)
-
Duration (Min.)
5
Approximate amount of remaining humidity %
-
REFRESH
Load(kg)
-
Washing machine spin speed(rpm)
-
Duration (Min.)
10
Approximate amount of remaining humidity %
-
EXPRESS 34'
Load(kg)
1,0
Washing machine spin speed(rpm)
1200
Duration (Min.)
34
Approximate amount of remaining humidity %
50
SHIRTS 20'
Load(kg)
0,5
Washing machine spin speed(rpm)
1200
Duration (Min.)
20
Approximate amount of remaining humidity %
50
Page 39
38
Energy consumption values
Program
Load (kg)
Washing machine
spin speed
Approximate
amount of
remaining
humidity
Energy
consumption
values (kWh)
Cotton cupboard dry
8
1000
60%
1,88
Cotton iron dry
8
1000
60%
1,55
Cotton iron dry
4
800
40%
0,93
Power consumption in the "off mode" (W)
0,5
Power consumption in the "on mode" PL (W)
1
The Cotton Cupboard Dry program is the standard drying program that can be run with a full or half load and
for which the information is given on the label and product receipt. This program is the most energy efficient
program to dry normal wet cotton clothes.
Auxiliary Functions
The table that summarizes the options that can be selected in programs is given below
Option
Description
Delicate Drying
Delicate fabrics are dried for a longer time at a low temperature
Drying Level
The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other
than the standard setting: 1, 2, 3. After selection, the LED of the relevant drying
level will turn on.
Anti-Crease
If you select the "Anti-Crease" option and do not open the door of the dryer at the
end of the program, the 1-hour anti-crease phase will extend to 2 hours. After
selecting the Anti Crease option, you will hear an audible warning. You can press
the same button again to cancel the option. If you open the door or press the
Start/ Pause key while the anti-crease step is in progress, the said step will be
cancelled.
Delay Start
You can delay the start time of the program by selecting the 1-hour to 23-hour
option. You can activate the desired delay time by pressing the Start/Pause button.
When the time is up, the selected program will start automatically. During the delay
time, options compatible with the program can be activated/deactivated. Long
pressing on Delayed Start button changes delay time continuously.
Time Drying
When knob is positioned to Time Drying program, option can be selected by
pressing Time Drying option button and program starts by pressing Start/Pause
button. Long pressing on time drying button changes time continuously.
Buzzer Cancel
The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of program. To cancel these warnings, press
the
button, you will hear an audible warning that the option has been cancelled.
Child Lock
There is a child lock option to avoid changes in the program flow when keys are
pressed during the program. To activate the child lock, press and hold the the child
lock is active, all keys will be deactivated. Child lock will be deactivated.
automatically at the end of the program. When activating/deactivating the child
lock, the LEDs of the - and options will flash and an
audible warning will be heard. Warning: when the product is running or the child
lock is active, if you turn the program selection knob, you will hear an audible
warning. Even if you set the program knob to another program, the previous
program will continue running. To select a new program, you need to deactivate
the child lock and then set the program position. Then,
you can select and start the desired program.
Page 40
39
Starting the Program
The Start/Pause LED will flash during program selection. Press the Start/Pause button to start the program.
The Start/Pause LED that indicates that the program has started and the drying LED will come on.
Program
Description
Cotton Extra Dry
This program dries thick and multi-layer fabrics, such as cotton towels,
bedsheets, pillowcases, bathrobes, at a normal temperature to allow you to
place them in a closet.
Cotton Cupboard Dry
This program dries cotton pajamas, underwear, tablecloths etc. to allow you
to place them in a closet.
Cotton Iron Dry
This program dries cotton laundry to prepare it for ironing. Laundry removed
from the machine will be damp.
Synthetics Cupboard Dry
This program dries synthetics, such as shirts, t-shirts, blouses, to allow you
to place them in a closet.
Synthetics Iron Dry
This program dries synthetics, such as shirts, t-shirts, blouses, to prepare
them for ironing. Laundry removed from the machine will be damp.
Delicate
This program dries thin clothes like shirts, blouses, and silk garments at a low
temperature to make them ready to wear
Time Drying
To reach the required drying level at a low temperature, you can use the time
programs of 20 min. to 200 min. Regardless of the drying level, the program
stops at the desired time.
Baby Care
This program dries delicate infant clothes to make them ready to wear.
Duvet
This program is used to dry duvet.
Sport
Sport program is used for synthetic sport laundries like shorts, t-shirts
Mix
This program dries cotton-synthetic mixed garments that do not discolor to
make them ready to wear.
Wool Refresh
Wool refresh helps wool textiles to remove excess water after washing by
applying low temperature and gentle movements of drum.
Refresh
Time drying option is selected from 10 minutes to 120 minutes without
providing hot air, refresh is done and bad odors can be eliminated.
Express 34'
1 kg of cotton shirts spun at a high speed in the washing machine are dried
in 34 minutes.
Shirts 20'
2 to 3 shirts are ready for to be ironed in 20 minutes.
Page 41
40
IMPORTANT: Do not open the loading door while the program is running. If you have to open the door, do
not keep it open for a long time.
IMPORTANT: If you do not take out the laundry after the program has ended, the 1-hour Anti Crease phase
will automatically be activated. This program rotates the drum at regular intervals to prevent creases.
Drum Light Information
• This product includes LED Drum Light. The light works automatically when you open the door. And closes
itself after a while automatically.
• It is not an adjustable option for user to open or close it.
• Please do not try to replace or modify the LED Light.
IMPORTANT: Do not use industrial chemicals to clean your dryer.
Do not use a dryer that has been cleaned with industrial chemicals.
Cleaning the Lint Filters
IMPORTANT: DO NOT FORGET TO CLEAN THE LINT FILTERS AFTER EACH USE.
To clean the lint filters:
1. Open the loading door.
2. Pull up the lint filters to remove it.
3. Open the outer filter.
4. Clean the outer filter by your hands or using a soft cloth.
5. Open the inner filter.
6. Clean the inner filter by your hands or using a soft cloth.
7. Close the filters and fit the hooks.
8. Place inner filter inside of outer filter
9. Refit the Lint filter
10. CLEANING AND CARE
Page 42
41
After the dryer has been used for a certain period of time, if you encounter a layer that will cause obstruction
on the filter surface, wash the filter with warm water to clean the layer. Dry the filter thoroughly before
reinstalling it again.
Emptying the Water Tank
1. Pull the drawer cover and carefully take out the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the discharge cap in the tank, clean it with water.
4. Refit the water tank.
IMPORTANT: Never remove the water tank when the program is running. The water condensed in the water
tank is not suitable for human consumption.
IMPORTANT: Do not forget to empty the water tank after each use.
Cleaning the Heat Exchanger
IMPORTANT
IMPORTANTon clean the heat exchanger after
every 30 drying processes or once a month
Page 43
42
If the drying process is completed, open the loading door and wait for it to cool down.
1. Open the kick plate cover as shown.
2. Unlock the exchanger cover by turning in the direction shown with arrows.
3. Take out the exchanger cover as shown.
4. Clean the front surface of the exchanger as shown.
5. Fit the exchanger cover as shown.
6. Lock the exchanger cover by turning in the direction shown with arrows.
7. Close the kick plate cover as shown.
WARNING: Do not clean with bare hands since the exchanger fins are sharp. they may hurt your hands.
Cleaning the Humidity Sensor
Inside the machine, there are humidity sensors that detect whether the laundry is dry or not. To clean the
sensors:
1. Open the loading door of the machine.
2. If the machine is still hot due to the drying process, wait for it to cool down.
3. Using a soft cloth soaked in vinegar, wipe the metal surfaces of the sensor and dry them.
Page 44
43
IMPORTANT: CLEAN THE METAL SURFACES OF THE SENSOR 4 TIMES A YEAR.
IMPORTANT: Do not use metal tools to clean the metal surfaces of the sensor.
WARNING: Due to the risk or fire and explosion, do not use solution agents, cleaning agents or similar
products when cleaning the sensors.
Cleaning the Inner Surface of the Loading Door
IMPORTANT: Do not forget to clean the inner surface of the loading door after each drying process. Open
the loading door of the dryer and clean all of the inner surfaces and the gasket with a soft, damp cloth.
Brand
FRAM
Model name
FHPD-V8T2BKA++
Height
Min: 845 mm / Max: 855
mm*
Width
596 mm
Depth
609 mm
Capacity (max.)
8 kg**
Net weight (with plastic door)
45,4 kg
Net weight (with glass door)
47,8 kg
Voltage
220-240 V
Power
1000 W
*Min. height: Height with the adjustable feet not used.
Max. height: Height with the adjustable feet extended to the maximum.
**Dry laundry weight before washing.
IMPORTANT: To improve the quality of the dryer, technical specifications are subject to change without prior
notice.
IMPORTANT: The values declared have been obtained in a laboratory environment according to the relevant
standards. These values may change depending on the environmental conditions and use of the dryer.
11. TECHNICAL SPECIFICATIONS
Page 45
44
ATTENTION:
1. Due to safety reasons, legislation forces a room of at least 1 m³ per 8 g refrigerant for such
equipment. For 150 g propane, the minimum allowed room size would be 18.75 m³.
2. Coolant: Risk of fire/risk of poisoning/risk of material damage and damage to the appliance. The
appliance contains refrigerant which, although it is environmentally friendly, is flammable R290.
Failure to dispose of it properly may result in a fire or poisoning. Dispose of the appliance properly
and do not damage the pipes in the refrigerant circuit.
Type of refrigerant: R290
Quantity of gas: 150 g
ODP (Ozone Depletion Potential): 0
GWP (Global Warning Potential): 3
Risk of explosion or fire. Remove any cigarette lighters and matches from pockets.
Do not place the dryer near open fires and ignition sources.
Your dryer is fitted with systems that continuously perform checks during the drying process to take the
necessary measures and warn you in case of any malfunction.
WARNING: If the problem persists even if you have applied the steps in this section, please contact the your
dealer or an Authorized Service Provider. Never try to repair a nonfunctional product.
PROBLEM
REASON
SOLUTION
The drying process takes a long time.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm water.
The heat exchanger might be
clogged.
Clean the heat exchanger
The ventilation grills in front
of the machine might be
closed.
Open the doors/windows to prevent the
room temperature from rising too much.
There might be a layer of
limescale on the humidity
sensor.
Clean the humidity sensor.
The dryer might be
overloaded with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on your
washing machine.
12. TROUBLESHOOTING
Page 46
45
PROBLEM
REASON
SOLUTION
Laundry comes out damp at the end of
the drying process.
The laundry that comes out hot at the end of the drying process generally
feels more humid.
The program used might not
be suitable for the type of
laundry.
Check the care labels on the laundry
items, select a suitable program for the
type of laundry and additionally, use the
time programs.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm water.
The heat exchanger might
be clogged.
Clean the heat exchanger
The dryer might be
overloaded with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on your
washing machine.
The dryer cannot be opened or the
program cannot be started. The dryer
does not get activated when adjusted.
The dryer might not be
plugged in.
Make sure that the plug is fitted in the
socket.
The loading door might be
open.
Make sure that the loading door is
properly closed.
You might not have set a
program or pressed the
Start/ Pause key.
Make sure that the program has been set
and the dryer is not in the Standby (Pause)
mode.
Child lock might be active.
Deactivate the child lock.
The program has been interrupted for no
reason.
The loading door might not
be closed properly.
Make sure that the loading door is
properly closed.
There might have been a
power failure.
Press the Start/Pause key to start the
program.
The water tank might be full.
Empty the water tank.
Clothes have shrunk, felted or
deteriorated.
The program used might not
be suitable for the type of
laundry.
Check the care labels on the laundry
items, select a suitable program for the
type of laundry.
Water leaking from the loading door.
There might be lint
accumulated on the inner
surfaces of the loading door
and on the surfaces of the
gasket of the loading door.
Clean the inner surfaces of the loading
door and the surfaces of the gasket of the
loading door.
The loading door opens on its own.
The loading door might not
be closed properly.
Push the loading door until you hear the
closing sound.
The water tank warning symbol is
on/flashing.
The water tank might be full.
Empty the water tank.
The water discharge hose
might be bent.
If the product is connected directly to the
water outlet, check the water discharge
hose.
Page 47
46
PROBLEM
REASON
SOLUTION
The filter cleaning warning symbol is on.
The lint filter might be
unclean.
Clean the filter.
The filter seat might be
clogged by lint.
Clean the filter seat.
There might be a layer that
causes obstruction on the
surface of the lint filter.
Wash the filter with lukewarm water.
The filter and heat exchanger cleaning
warning symbol are flashing.
The filter seat might be
clogged by lint.
Clean the filter seat.
There might be a layer that
causes obstruction on the
surface of the lint filter.
Wash the filter with lukewarm water.
The heat exchanger might
be clogged.
Clean the heat exchanger.
The program cannot be started and the
filter warning led is blinking.
The filter may not be placed.
Replace the filter.
The filter warning led is
blinking even though the
filter is placed.
Call technical service.
Your tumble dryer is equipped with a built-in fault detection system, indicated by a combination of flashing
operation lights. The most common failure codes are shown below.
ERROR CODE
SOLUTION
E03/
Empty the water tank, if problem does not solve, contact the
nearest authorized service agent.
E04
Contact the nearest authorized service agent.
E05
Contact the nearest authorized service agent.
E06
Contact the nearest authorized service agent.
E07
Contact the nearest authorized service agent.
E08
There may be voltage fluctuation in mains. Wait until voltage is
appropriate for working range.
13. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Page 48
47
PRODUCT FICHE HEAT PUMP DRYER FHPD-V8T2BKA++
Brand
FRAM
Model
FHPD-V8T2BKA++
Rated capacity (kg)
8
Type of Tumble dryer
Heat Pump
Energy efficiency class
A++
Annual energy consumption (kWh)
235
Model type (automatic / non-automatic)
Automatic
Energy Consumption of the standard cotton programme at full load (kWh)
1.88
Energy Consumption of the standard cotton programme at partial load (kWh)
1.1
Power consumption of the off-mode for the standard cotton programme at full load
PO (W)
0.5
Power consumption of the left-on mode for the standard cotton programme at full
load PL (W)
1
The duration of the left mode on (min)
N/A
Standard cotton programme
(3)
-
Programme time of the standard cotton programme at full load , T
dry
174
Programme time of the standard cotton programme at partial load , T
dry1/2
103
Weighted programme time of the standard cotton programme at full and partial load
(Tt)
103
Condensation efficiency class
(4)
B
Average condensation efficiency of the standard cotton programme at full load C
dry
81%
Average condensation efficiency of the standard cotton programme at partial load
C
dry1/2
81%
Weighted condensation efficiency of the standard cotton programme at full load and
partial load Ct
81%
Sound power level for the standard cotton programme at full load
(5)
65
Built-in
No
14. PRODUCT FICHE
Page 49
48
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorized Service Centre, ensure that you have the following data available: Model
and Serial Number.
The information can be found on the rating plate. Subject to change without notice.
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the
energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related
to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with
this appliance.
It is also possible to find the same information in EPREL using the link https:// eprel.ec.europa.eu and the
model name and product number that you find on the rating plate of the appliance.
Thank you for purchasing this product. If you need support with your product, visit our website using the
links below.
Get User manuals: www.framelectrocasnice.ro
Get Service information: www.framelectrocasnice.ro
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-
appropriate waste disposal center.
Page 50
49
FRAM is a registered trademark of Network One Distribution SRL. Other brands and product names
are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from NETWORK
ONE DISTRIBUTION.
Copyright © 2013 Network One Distribution. All rights reserved.
www.framelectrocasnice.ro; www.framappliances.com; www.nod.ro
This product is in conformity with norms and standards of European Community.
Importer: Network One Distribution
Marcel Iancu, 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.framelectrocasnice.ro, www.nod.ro
www.framelectrocasnice.ro
Loading...