To reduce the potential for accidents, comply with the safety instructions in this manual.
Failure to comply may result in serious personal injury and/or equipment and property damage.
INTRODUCTION
The FRADAN Push Blower model is a ruggedly built, high performance gasoline powered unit specially designed
for blowing leaves and debris. Proper maintenance and use of the FRADAN Blower will guarantee years of safe,
service-free, reliable operation.
We wish for you to gain sufficient knowledge from this booklet before operating your Fradan, and make the best
use of it in the future. We urge you to follow these instructions to assure safe and reliable operation.
Because a power blower uses gasoline and blows air and debris at a high speed, safety precautions must be
observed to reduce the risk of personal injury. Read this manual carefully. Be familiar with the controls and the proper use of the machine.
This graphic accompanied by the words WARNING and DANGER calls
attention to an act or a condition which can lead to SERIOUS INJURY.
WHEN YOU SEE THIS SYMBOL, HEED ITS WARNING!
STAY ALERT!
FRADAN
OWER EQUIPMENT
P
CAUTION
Removal of this cover can result in
erious bodily injuries, and
s
ill cause heavy damage
w
to the machine.
READ & UNDERSTAND
ALWAYS WEAR EYE AND EAR PROTECTION.
Removal of this cover can result in serious bodily injuries,
and will cause heavy damage to the machine.
KEEP HANDS & FEET AWAY FROM AIR DISCHARGE AREAS.
ROTATING FAN BLADES WILL CAUSE SERIOUS INJURY.
Operator’s Manual and Safety Manual.
CCAAUUTTIIOON
N
WARNING DANGER
The engine exhaust from this product contains chemicals known to the
State of California to cause cancer, birth defects, or other reproductive harm.
Specifications, descriptions and illustrative material in this manual are as accurate as known at the time of publi-
cation, but are subject to change without notice. Ilustrations may include optional equipment and accessories, and
may not include all standard equipment.
5
SAFETY RULES & PRECAUTIONS
Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully.
DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do not permit others to use
this machine unless they are thoroughly responsible and have read, and understand the machine manual and are
trained in its operation.
• Always wear safety goggles for eye protection. Dress properly, do not wear loose clothing or jewelry that could
become caught in moving parts of the unit. Safe, sturdy, nonskid footwear should always be worn. Long hair
should be tied back. It is recommended that legs and feet be covered to protect from flying debris during operation.
• Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and any damage. Repair or replace as necessary before using the machine.
DO NOT USE any attachment with this Power Blower other than the ones recommended by FRADAN. Serious
•
injury to the operator or bystanders could result as well as damage to the machine.
• Keep the handles free from oil and fuel.
• Do not smoke while handling fuel or filling tank.
• Do not fuel machine in an enclosed room or near open flames. Assure adequate ventilation.
• Always store the fuel in a properly marked container that is approved by local codes and ordinances for such
usage.
• Never remove the fuel tank cap while the engine is running.
• Never start or run the engine inside a closed room or building. Fumes from the exhaust contain dangerous carbon monoxide.
Never attempt to make engine adjustments while the unit is running.
•
unit resting on a flat, clear surface.
• Do not use the unit if it is damaged or poorly adjusted. Never remove the machine’s guard and front air intake
cover.
• Keep children away. Onlookers should be kept at a safe distance from the work area, at least 100 FEET/130METERS.
• Never leave the machine unattended.
• Do not use this unit for any job other than those for which it is intended as described in this manual.
• Do not overreach. Keep proper footing and balance at all times. Do not run the unit on very hilly areas or on any
unstable footing location.
Always make engine adjustments with the
• Do not use the unit when you are tired or under the influence of medication, drugs or alcohol.
6
SAFETY RULES & PRECAUTIONS
• Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters, furnaces, etc.
Store in a locked, well ventilated area only.
• Use only FRADAN original equipment parts when servicing the unit. This will ensure safe and proper performance
of your product. These parts are available from your dealer. The use of any other accessories or attachments may
cause a potential hazard or injury to the user, damage to the machine and void this warranty.
• Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
• When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel when the engine is
running hot. When gasoline spills, be sure to wipe it up completely and properly dispose of those materials before
starting the engine.
• Stay clear of the other workers or bystanders by at least 100 feet / 30 meters.
• When ever approaching an operator of the machine, carefully call his attention and confirm that the operator stops
the engine. Be careful not to startle or distract the operator which can cause an unsafe situation.
WARNING - KEEP CHILDREN, PETS, and BYSTANDERS AWAY - Do not permit children to contact blower. Keep children a safe distance from work area. Never allow a person mentally ill, under influence of alcoholic
drinks or drugs or too young in age, to operate the blower.
• Pay attention to loosening and overheating of parts. If there is any abnormality of the machine, stop operation
immediately and check the machine carefully. If necessary, have the machine serviced by an authorized FRADAN
dealer. Never continue to operate a machine which may be malfunctioning.
• In start-up or during operation of the engine, never touch hot parts such as the muffler, the high voltage wire or
the spark plug.
• After the engine has stopped, the muffler is still hot. Never place the machine in any places where there are flammable materials (dry grass, etc.), combustible gases or combustible liquids.
• Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
Be careful not to drop the machine or hit it against obstacles.
•
• Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark plug cap from
the spark plug.
• When the machine is placed in storage for a long time, drain fuel from the fuel tank and carburetor, clean the parts,
move the machine to a safe place and confirm that the engine is cooled down.
Make periodic inspections to assure safe and ef
•
please contact a FRADAN dealer.
Keep the machine away from fire or sparks.
•
ficient operation. For a thorough inspection of your machine,
• Never blow leaves and debris into highways and roadways.
• DO NOT POINT THE BLOWER OUTLET in the direction of people, cars, glass, or other similar items which could
be injured or damaged by blown debns.
7
ASSEMBLY INSTRUCTIONS
Remove blower unit from box and inspect for
•
hipping damage.
s
•Position unit to rest on front cover.
•Remove wheel nuts and wheels with a 15/16
wrench.
Handle Assembly (Refer to figure 1).
1. Insert lower handle (B) into upper handle
(A) making sure that throttle guides are
both in line.
2. Insert lower handle (C) into upper handle
(A).
3. Install handle plate using four 5/16 x 1 1/4
bolts washers and lock nuts, ensuring that
all bolts are properly tightened.
•Install handle assembly to the blower frame
using two 5/16 x 1 1/2 bolts, washers and
lock nuts, and two 5/16 x 1 1/4 bolt, washer
and lock nuts.
•Ensure that all bolts are properly tightened.
•Reinstall wheels. Ensure that all bolts are
properly tightened.
•Install throttle cable using two #10 screws,
washers and lock nuts.
•Fill up crank case with proper engine oil.
Refer to engine manufacturing manual.
•Ensure that all nuts, screws and bolts,
installed are properly tightened.
•Check wheel for proper inflation - 15-20 PSI
all models. Do not over inflate.