Fracarro LCD-15B, LCD-19B, LCD-17B User Manual

LCD-15B LCD-17B LCD-19B

15” 17” 19” TFT LCD MONITOR

User’s Manual

Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep
this manual for future reference.

• Risk of electrical shock

• Do not open so as to reduce the risk of electrical shock

• Do not remove the back cover. There are no useful parts inside.

• The removal of the back cover makes the guarantee invalid.

• The LCD must only be repaired by qualified personnel.

Warnings and precautions

 Do not put your hands or face or any object near the LCD ventilation opening. The upper side of the

LCD is very hot because of the exhaust air that comes out from the ventilation openings. You may be at
risk for burns or lesions if you stay to close to the LCD. Do not place any object on the upper side of
your LCD.

 Disconnect all cables before moving the LCD. If the LCD is moved while the cables are connected, they

can be damaged and an electrical shock or fire may occur.

 Do not expose the unit to heat, water and/or humidity in order to avoid fire or electrical shock.
 Use the LCD in a properly ventilated area and do not cover the ventilation openings.
 Do not use a feeder different from the one supplied with the product.
 Disconnect the LCD power cable when it is not used for long periods of time.
 If the LCD does not display the image properly, disconnect the power cable. Check the Video IN

connections and reconnect the power cable.

 Disconnect the LCD power cable when you want to clean the LCD. Do not use products that contain

alcohol: use only a slightly damp cloth.

 Make sure the LCD is positioned firmly (not on a trolley) in order to avoid the unit from being damaged.

Safety directions

SAFETY WARNINGS

The product must be installed only by qualified persons, according to the local safety standards and
regulations.
It is classified as Class II, in accordance with EN 60950-1.

Installation warnings

- Use only the original power cable, installing the product so that the mains plug is easily accessible.

- The product must not be exposed to dripping or splashing and thus it shall be installed indoors, in a
dry place.

- Leave enough space around the product housing to ensure sufficient ventilation. An excessive
operating temperature and/or an excessive heating may affect the performance and the life of the
product.

- Don’t install the product above or close to heat sources, in dusty places or where it might come into
contact with corrosive substances.

- Humidity and condensation could damage the product. In case of condensation, wait until the
product is dry before using it.

Important: Only instructed and authorized persons can open the product. In case of failure, do not try to
repair the product; otherwise the guarantee will no longer be valid.

Safety measurements

You can use your video with the front panel keys

.

Front panel

Back side

Side

Monitor views

15” 17”

19”

★

Luminous image

★ Exact processing of color
★ Built-in amplifier and loudspeakers
★ 1280*1024 SVGA for computer input

Components

1 LCD COLOR MONITOR
1 ACCESSORIES: FEEDER AND USER’S MANUAL

Up: Up arrow key on the OSD

Down: Down arrow key on the OSD

MENU Menu: enables the OSD menu

Right : Increases the values on the menu and raises the volume
Left : Decreases the values on the menu and lowers the volume

SOU/AOU Sources: Changes the video input sources

Power: switches the monitor ON

Characteristics

Key instructions

I/O Conne

ctors

:

OSD (On Screen Display) : the menu allows the user to set the video parameters

OSD Menu Video OSD Menu

Feature Controls of the OSD Menu

PC (VGA) OSD Menu

OSD (On Screen Display)

VGA Synchronization
The VGA synchronization can be of 14 modes that are saved in the memory

15” 17” 19” Mode No. Resolution H Freq. (kHz) V Freq. (Hz) Pixel clock

(MHz)

75Hz

75Hz

75Hz

101 832x624@74.5 49.722 74.546 57.280 ˇ ˇ ˇ MAC

102 640x480@67 35.000 66.667 30.240 ˇ ˇ ˇ
103 720x400@70 31.469 70.08 28.322 ˇ ˇ ˇ

104 640x480@60 31.469 59.940 25.175 ˇ ˇ ˇ
105 640x480@72 37.861 72.809 31.500 ˇ ˇ ˇ

VGA

106 640x480@75 37.500 75.000 31.500 ˇ ˇ ˇ
108 800x600@60 37.879 60.317 40.000 ˇ ˇ ˇ

109 800x600@72 48.077 72.188 50.000 ˇ ˇ ˇ

SVGA

110 800x600@75 46.875 75.000 49.500 ˇ ˇ ˇ
111 1024x768@60 48.363 60.004 65.000 ˇ ˇ ˇ
112 1024x768@70 56.576 70.069 75.000 ˇ ˇ ˇ

XGA

113 1024x768@75 60.023 75.029 78.750 ˇ ˇ ˇ
114 1280x1024@60 63.980 60.000 108.000 ˇ ˇ SXGA
115 1280x1024@75 79.976 75.025 135.000 ˇ ˇ

PC RGB Inputs

Feeder

Input voltage 100~240VAC, 50/60Hz
Output voltage +12V DC, 3.33A (40W) / 4.16A (50W)
Power On: 50W max. (green LED)

Off: 1W max. (red LED)

Environmental conditions

Input signal Analog RGB 0.7Vp-p
Input impedance 75 Ohm ± 2%
Polarity Positive, Negative
Amplitude 0 ~0.7 ± 0.05Vp
Multi-mode support Horizontal frequency: 30~80KHz

Vertical frequency: 50~75Hz

Operational conditions 5◦C to 35◦C
Relevant humidity 20% to 85%
Storage conditions Temperature -20◦C to 60◦C
Relevant humidity 5% to 85%

Applicable synchronizations

15” LCD

17” LCD

19” LCD

Monitor views

Fracarro Radioindustrie S.p.A. - Via Cazzaro n.3 - 31033 Castelfranco Veneto (TV)
ITALIA Tel: [phone] - Fax: [phone]
Società soggetta a direzione e coordinamento di CAMI S.r.l. - partita IVA 02399120266

Fracarro France S.A.S. – 7-14 rue du Fossé Blanc - 92230 Gennevilliers Cedex
FRANCE Tel: [phone] - Fax: [phone]
Fracarro Iberica - Poligono Táctica, “Ciudad de los negocios” c/2A n°4 - 46980 Paterna - Valencia - ESPAÑA Tel. [phone] ­Fax [phone]
Fracarro (UK) - Ltd, Unit A, Ibex House, Keller Close, Kiln Farm, Milton Keynes MK11 3LL
UK Tel: [phone] - Fax: [phone]
Fracarro Tecnologia e Antenas de Televisao - Lda Rua Alexandre Herculano, n°1-1°B, Edifício C entral Park 2795-242 Linda-a-Velha
PORTUGAL Tel: + 351 21 415 68 00 - Fax+ 351 21 415 68 09

www.fracarro.com [e-mail]

LCD-15B -17B -19B Rev. 0 24/06/2008