Operating Instructions
www.foxunhd.com
FX-SP01 HDMI Splitter
1x2 HDMI Splitter support EDID,4kx2k@60Hz(YUV4:2:0) HDCP,EDID
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Introduction
Specifications
Package Contents
Panel Descriptions
EDID Introduction
Connecting and Operating
Typical Application
Product Service
Warranty
Operating Instructions
www.foxunhd.com
Feature
1x2 HDMI Splitter, with 1xHDMI input,2xHDMI outputs.
Resolution reach up to 4Kx2K/30HZ. and 1080p Full HD.
Supports four kinds of EDID handling abilities: mixed EDID, copy EDID, default 1080p output, default
4Kx2K output.
Supports LPCM7.1 Dolby TrueHD, Dolby Digital plus DTS-HD Master Audio.
Support 3D format.
Supports 36 bit deep color.
DC 5V1A Power supply.
Power consumption:2watts
Dimension (L×W×H):75x68x25.2mm
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
INTRODUCTION
FX-SP01 is a HDMI Splitter that distribute 1 Ultra HD source to 2 Ultra HD displays,with 2 Bit DIP switch to
select from 4 kinds of EDID models.
SPECIFICATIONS
Operating Temperature Range
-5 to +65℃(+23 to +149℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Ports
1xHDMI Female
Input DDC Signal
5 volts p-p(TTL)
Video Format Supported
DTV/HDTV:480i/576i/480P/576P/720P/1080i
/1080P/4Kx2K
Output Port
2xHDMI Female
Support Video Color Format
Supports 36 bit deep color
Support Audio Format
LPCM7.1, Dolby, TrueHD, Dolby, Digital plus
DTS-HD Master Audio .
Power consumption
2watts
Dimension (L×W×H)
75x68x25.2mm
Net weight
128g
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
Operating Instructions
www.foxunhd.com
PACKING CONTENTS
1) Main Unit. 1x2 HDMI Splitter
2) 5V1A DC Power Supply.
3) User manual
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.
PANEL DESCRIPTION
1）Power Input
2）Indicator of the power input.
3) HDMI input
4) DIP switch for EDID choosing
00: Mixed EDID, 11: Copy EDID,
10: Default 1080p output, 01: Default 4Kx2K output
5）HDMI output
6)Indicator of the HDMI input source, when display the HDMI input source, the corresponding LED lights
green.
EDID Introduction
Operating Instructions
www.foxunhd.com
EDID switch
statues
EDID function description
Copy EDID(output1 is prior port,when output1 is
connected to one display,another display which connected to output
2 will follow the resolution of output1;when output1 is
disconnected,output2 will output 1080p only.)
Mixed EDID(always follow the lowest resolution
of the Displays connected to output 2 in order to support all displays
show the source)
Default 1080P output(output a default 1080p
source,in this case all outputs will display 1080p if they support
resolution 1080p and above.)
Default 4Kx2K output(output a default 4K
source,in this case all outputs will display 4K if they support
resolution 1080p and above.)
CONNECT AND OPERATE
1) Connect the HDMI sources (such as PS3, STB, DVD, ETC) to the SP01.
2) Connect HDMI displays (such as HDTV, HD-LCD) into the HDMI outputs of the SP01.
3) Connect DC 5V1A power to the power port of the SP01.
Typical Application
Operating Instructions
www.foxunhd.com
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable
only when power is off.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
Operating Instructions
www.foxunhd.com
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
Loading...