Foxtech Map-01 User Manual

Download

Page 1

FOXTECH Map-01 Mapping Camera

User Manual

V1.1

2018.04

Page 2

Contents

FOXTECH Map-01 Mapping Camera User Manual

Warning

Checking the Supplied Items

Identifying Parts

Optional Mapping Lens

Specifications

Attaching/Removing the Lens

Attaching the Lens

Removing the Lens

Power Supply for Camera

Set Camera Date

Set Camera Language

Set Exposure Time

Save Settings of the Camera

Connect Camera to Pixhawk 2.1 and Reach PPK&RTK

Notes on Using the Camera

Page 3

FOXTECH Map-01 Mapping Camera User Manual

Warning

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

Checking the Supplied Items

Supplied Items

• Camera (1)

• Cable (1)

Page 4

Identifying Parts

FOXTECH Map-01 Mapping Camera User Manual

① ②

⑧

③

①

Setting

②

③

Camera Terminal

④

Lens Release Button

⑤

HDMI

④

⑥

SD Card

⑦

USB

⑧

Mount

⑨

Image Sensor

⑩

Len Contacts

⑨

⑩

1) Do not cover this part during moive recording.

2) Do not touch this part directly

⑤

⑥

⑦

Pin 6-Trigger Switch (Shutter Feedback)

Pin 5-Trigger Switch (Shutter Feedback)

Pin 4-Manual Trigger

Pin 3-PWM Signal Input

Pin 2-Power (3S-6S, DC11.1V-DC26V)

Pin 1-GND

Page 5

FOXTECH Map-01 Mapping Camera User Manual

Optional Mapping Lens

E16mm F2.8 E20mm F2.8 E25mm F5.6 E35mm F1.8

Page 6

Specifications

FOXTECH Map-01 Mapping Camera User Manual

Item Name

Sensor Type

Number of Pixels(Effective)

Image Size(Pixels)

Image Quality Modes

Lens Compatible

Focus

Shutter Speed

Exposure Modes

Exposure Compensation

Metering Mode

Map-01 Mapping Camera

Exmor APS HD CMOS APS Frame(23.5*15.6mm)

24.3 MP

3:2

L(24M): 6000×4000

M(12M): 4240×2832

S(6M): 3008×2000

RAW / RAW+JPEG

E35mm F1.8 / E20mm F2.8 / E16mm F2.8

Mix Automatic Focus / Manual Focus / 4D Focus

30-1/4000 sec

Programmed AE(P) / Aperture priority(A) /

Shutter-speed priority(S) / Manual(M)

±3EV(1/3EV)

Multi-pattern / Center-Weighted / Spot Metering

16:9

L(20M): 6000×3376

M(10M): 4240×2400

S(5.1M): 3008×1688

White Balance

ISO Sensitivity

Image Stabilization

Continuous shooting

Storage Card Type

Working Voltage

Interface

Shuttle Control

Shutle Feedback

Body Martial

Dimension

Weight

Working Temperature

Auto / Default

ISO 100-25600

Optical Anti-shake(Lens Anti-shake)

Up to 6FPS

SD / SDHC / SDXC Card / MS

3S-6S(DC11.2V-DC26V)

HDMI USB2.0

PWM

Relay(Max.Voltage: DC32V Max.Currency: 130mA)

Carbon Fiber / Aviation Aluminum

80x70x38mm

155g(Lens Excluded)

-10℃~55℃×

Page 7

FOXTECH Map-01 Mapping Camera User Manual

Attaching/Removing the Lens

Lens are optional. For purchase please contact Foxtech sales.

Attaching the Lens

Fig.1 Fig.2

Fig.3

1. If the cap or the packaging lid is attached, remove it from the camera or the lens.(Fig.1)

• Quickly change the lens somewhere away from dusty locations to keep dust or debris from getting

inside the camera.

2. Mount the lens by aligning the white index marks on the lens and the camera.(Fig.2)

• Hold the camera facing down to prevent dust from entering into the camera.

3. While pushing the lens lightly toward the camera, turn the lens clockwise until it clicks into the locked

position.(Fig.3)

• Be sure to put the lens on straight.

• When attaching a lens, do not press the lens release button.

• Do not use excessive force when attaching a lens.

Page 8

FOXTECH Map-01 Mapping Camera User Manual

Removing the Lens

Lens Release Button

Press the lens release button all the way in and turn the lens counterclockwise until it stops.

• If dust or debris gets inside the camera while you are changing the lens and adheres to the

surface of the image sensor (the part that converts the light source to a digital signal), it may appear

as dark spots on the image, depending on the shooting environment. The camera vibrates slightly

when it is turned off, due to the anti-dust function, to prevent dust from adhering to the image

sensor.

However, attach or remove the lens quickly somewhere away from dusty locations.

• If foreign material attaches to the image sensor, dust it off using a blower.

• Do not leave the camera with the lens removed.

• When you want to use body caps or rear lens caps, please purchase ALC-B1EM (Body cap) or

ALC-R1EM (Rear lens cap) (sold separately).

Page 9

FOXTECH Map-01 Mapping Camera User Manual

Power Supply for Camera

Power Connection: Connect the 3S-6S (DC11.2V-DC25V) positive wire to camera Pin 2(+), and negative

wire to camera Pin 1(GND-).

Don't operate the camera immediately after power-on. After 15s self-checking, the camera will acquire the

usual parameters for mapping, and it can meet he requirements of most missions. You also could set up the

parameters by the menu button on the top of the camera.

Set Camera Language

Select items: / / / / /

Set:

1. Check that [Enter] is selected on the screen, then press on the control wheel.

2. Set [Language], then press .

3. Check that [Enter] is selected, then press .

Page 10

FOXTECH Map-01 Mapping Camera User Manual

Set Camera Date

1. Check that [Enter] is selected on the screen, then press on the control wheel.

2. Set [Date/Time Setup] and [Date Format], then press .

• When setting [Date/Time], midnight is 12:00 AM, and noon is 12:00 PM.

3. Check that [Enter] is selected, then press .

Set Exposure Time

ISO: Allows you to set the sensitivity based on the brightness. For this E25mm F5.6 lens,

recommended time of exposure is 250s. Set different exposure time depending on the type of lens.

Page 11

FOXTECH Map-01 Mapping Camera User Manual

Save Settings of the Camera

Move down the switch when the camera is powered to save settings, move up the switch when the power is

attached will re-power the camera with new settings.

Connect Camera to Pixhawk 2.1 and Reach PPK&RTK

1. Connect according to FC shutter signal type: Connect PWM signal wire to camera Pin 3 (PWM) and Pin1

(GND-).

2. Shutter Feedback for PPK: When used with PPK system, please lead out the camera Pin 5 (NO) and Pin

6 (NO), and connect them to PPK or RTK system.

1 2 3 4 5 6

Page 12

FOXTECH Map-01 Mapping Camera User Manual

Notes on Using the Camera

Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping,

or stepping on the product. Be particularly careful of the lens.

This content is subject to change.

Download the latest version from

https://www.foxtechfpv.com/foxtech-map-01-camera.html

For everyday updates, please follow Foxtech facebook page"Foxtechhobby".

YouTube Channel: Foxtech