Fox & Summit FS-VS200 User Manual

Wi-Fi Vibration Sensor

FS-VS200

Quick Start Guide

What’s in the Box

Wi-Fi Vibration Sensor

FS-VS200

Quick Start Guide

Wi-Fi Vibration Sensor Quick Start Guide

3 AAA Batteries

Mounting Tape

Safety Instructions

• Practice safe installation habits while installing the Vibration Sensor.

• Do not tamper with or make any modifications to your Vibration
Sensor.

• Make sure you replace batteries with 3 new AAA alkaline batteries.
Insert batteries in the correct polarity as shown inside the battery case.

• Properly dispose of old batteries in accordance with local regulations.
Do not discard batteries with any other household waste.

• Keep batteries away from small children and pets.

• Use only a dry cloth when cleaning your Vibration Sensor.

• Do not install your Vibration Sensor near any heat source or any home
equipment that produces heat.

Wi-Fi Operation Warnings

• Always check that your smartphone or tablet OS and FS Home App
is running the most up-to-date version.

• Check that your Wi-Fi router is working properly and operates on

802.11b/g/n 2.4GHz with WPA/WPA2 encryption. The App does not
support any other network encryptions.

• DO NOT use a 5GHz Wi-Fi network.

Wi-Fi Vibration Sensor Installation and App Setup

1. Download the FS Home App from the App Store or Google Play.

App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.

2. Connect your smartphone or tablet to the 2.4GHz Wi-Fi network you
want to connect your Fox & Summit sensor to.

Your Wi-Fi RouterYour Smartphone