Fox & Summit FS-OMSL100 User Manual

Wi-Fi Outdoor Motion Triggered Spot Light

FS-OMSL100

Quick Start Guide

What’s in the Box

Wi-Fi Outdoor Motion Triggered Spot Light

FS-OMSL100

Quick Start Guide

Wi-Fi Outdoor Motion

Triggered Spot Light

Mounting Screws and

Masonry Plugs

Quick Start Guide

Safety Instructions

• Practice safe installation habits while installing the Wi-Fi Outdoor
Motion Triggered Spot Light.

• Do not tamper with or make any modifications to your Wi-Fi Outdoor
Motion Triggered Spot Light.

• Make sure you replace batteries with 4 D-Cell alkaline batteries. Insert
batteries in the correct polarity as shown inside the battery case.

• Properly dispose of old batteries in accordance with local regulations.
Do not discard with any other household waste.

• Keep batteries away from small children and pets.

• Use only a dry cloth when cleaning your Wi-Fi Outdoor Motion
Triggered Spot Light.

• Do not install your Wi-Fi Outdoor Motion Triggered Spot Light near any
heat source or any home equipment that produces heat.

Wi-Fi Operation Warnings

• Always check that your smartphone or tablet OS and FS Home App is
running the most up-to-date version.

• Check that your Wi-Fi router is working properly and operates on

802.11b/g/n 2.4GHz with WPA/WPA2 encryption. The App does not
support any other network encryptions.

• DO NOT use a 5GHz Wi-Fi network.

Wi-Fi Outdoor Motion Triggered Spot Light Installation
and App Setup

1. Download the FS Home App from the App Store or Google Play.

FS Home

App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.

2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network.

Your Wi-Fi RouterYour Smartphone

3. Open the front of the Outdoor Motion Sensor Light by twisting the
front counterclockwise (to the left).