Foxfury Lighting Solutions SIDESLIDE SERIES, BOLT 940K-010RSC, PICATINNY 940K-010PIC, C-CLAMP 940K-010FI Product Manual
PRODUCT MANUAL
C-CLAMP 940K-010FI | BOLT 940K-010RSC | PICATINNY 940K-010PIC
SIDESLIDE SERIES
2
SIDESLIDE REFERENCE GUIDE
LANYARD
HOLE
RUBBER
SLEEVE
POWER/MODE SWITCHLOCKING GROOVE
STRIKE BEZEL
ANTI-ROLL HEAD TAILCAP
HANDLE
BOLT MOUNT PICATINNY MOUNT
C-CLAMP MOUNTHOLDER
RELEASE
LEVER
MOUNT
SCREW HOLES (3)
RELEASE
LEVER
MOUNT
THUMBSCREW (2)
RELEASE
LEVER
MOUNT
SCREWS (4)
RELEASE LEVER
FRONT
3
PHYSICAL CHARACTERISTICS
Please read below before using your SideSlide as it relays beneficial operating
and safety information.
FLASHLIGHT (940– 010FI OR 940– 012)
DIMENSIONS
5.5 x 1.5 x 1.1 in
140 x 38 x 28 mm
WEIGHT
(without battery)
5.3 oz (150 g)
These application-specific SideSlide mounts allow the flashlight to be secured
to the Holder for quick and easy hands-free use.
C-CLAMP MOUNT (85-010)
DIMENSIONS
1.5 x 2.8 x 1.6 in
38 x 71 x 41 mm
WEIGHT 3.7 oz (105 g)
BOLT MOUNT (85-011)
DIMENSIONS
1.5 x 2.0 x 2.4 in
38 x 51 x 61 mm
WEIGHT 2.9 oz (82 g)
PICATINNY MOUNT (85-012)
DIMENSIONS
1.5 x 1.8 x 1.9 in
38 x 46 x 48 mm
WEIGHT 2.5 oz (71 g)
4
BATTERIES
The SideSlide Series flashlight requires one (1) 18650 battery or two (2)
CR123 batteries.
Mixing of new and used, or different brand batteries is not recommended
as this could lead to leakage or explosion.
BATTERY INSTALLATION AND REPLACEMENT
1. Twist the Tailcap in a counter-clockwise direction to remove it.
2. Insert the battery with the positive end first. (Respect appropriate polarity
when installing).
3. Re-install the Tailcap by twisting it in a clockwise direction back onto the
Handle. (Make sure the Tailcap is tightly sealed).
4. Test the light’s performance and function by activating the Power/Mode
Switch (located at the end of the Tailcap).
BATTERY LIFE (940K-010FI & 940K-010RSC)
MODE BATTERY LIFE LUMENS
HIGH POWER 3.5 hours 200
LOW POWER 8 hours 70
FLASHING 5 hours 200
+ BATTERY –
1
2
TAILCAP
Loading...