Foxfury Lighting Solutions Breakthrough series, Breakthrough BT2-IS Product Manual

PRODUCT MANUAL

380-FF01-BT2-BL

BREAKTHROUGH

®

INTRINSIC SERIES

BT2-IS

2

BT REFERENCE GUIDE

POWER/MODE SWITCH

D-RING HOLE

BLACK

FACECAP

CHARGING
PORT

STAINLESS
STEEL CLIP

BATTERY
CHARGING
INDICATOR

BATTERY DOOR HINGE BATTERY DOOR LOCK HOLE

BATTERY DOOR

(BOTTOM VIEW)

ALSO INCLUDED

HEX KEY

BACK* FRONT

OPEN

BATTERY

PACK

BATTERY

DOOR

LOCKED

UNLOCKED

LOCKING

MECHANISM

BATTERY

PACK

RELEASE

BUTTON

3

PHYSICAL CHARACTERISTICS

Please read below before using your Breakthrough® as it relays beneficial
operating and safety information.

BT2-IS

DIMENSIONS

2.8 x 3.7 x 7.5 in tall (71 x 94 x 190 mm)

2.8 in Head Diameter (71 mm)

WEIGHT 1.3 lbs (590 g)

OVERVIEW

The FoxFury Breakthrough® BT2 Intrinsically Safe Hybrid Right Angle Light
features a 200 lumen UltraReach beam and is designed for use in hazardous
locations. This intrinsically safe search tool has a UL913 rating, Class I, Zone
0, AEx ia IIC T5 and IECEx rating: Ex ia IIC T5 Ga. Compact 2 degree beam
outperforms most box light and high powered flashlights.

WARNINGS

When used for extended periods of time the Breakthrough® Stainless
Steel Clip will become HOT to the touch. Please use care when operating.

Do not stare into LEDs for long periods of time or from a close range
(less than 2 ft or 0.6 m).

If the BT Instrinsic is immersed in water for a significant amount of time
(4+ hours), the lens will turn a shade of milky white. Most of the light will
still transmit. After drying for 6+ hours, it goes back to normal. This is
because the BT Instrinsic lens has carbon nanotubes. They absorb the
water and change the color of the lens. This conditio does not impact
Intrinsic certification.

!

!

CERTIFICATIONS FOR HAZARDOUS LOCATION:

UL: Class I Div 1 & 2 GRP A, B, C, & D, T5: CLASS I, ZONE 0, AEx ia IIC T5
Ga

IECEx: Ex ia IIC T5 Ga

UL913, Seventh Edition: UL8750:2015

IEC60079-0: IEC60079-11

4

BATTERY INFORMATION

The BT Intrinsic Series requires four (4) AA batteries. Acceptable battery
types include: Duracell Coppertop AA 1.5v Alkaline, MN1500; Duracell
Plus Power AA 1.5v Alkaline, MN1500; Energizer Industrial AA 1.5v
Alkaline, EN91; Energizer AA 1.5v Alkaline, E91

Acceptable rechargeable NiMH battery types include: Duracell AA 1.2v
NiMH, DC 1500 HR6

BATTERY WARNINGS

Potential electrostatic charging hazard.

Mixing of new and used or different brand batteries is not permitted as
this could lead to leakage or explosion.

To prevent ignition of a hazardous atmosphere, batteries must only be
changed in an area known to be non-hazardous.

Do not replace batteries or battery pack when an explosive gas
atmosphere may be present.

When operating the light, if an electrostatic charge builds, this can be
safely discharged by touching the flashlight body to a grounded (earth)
object. Do not attempt to discharge to ground with metal clip.