FOXCONN H67A User Manual

H67A Series

Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for H67A-S/H67A motherboard

Symbol description:

Caution: refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning: indicating a potential risk of hardware damage or physical injury may

exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard H67A-S/H67A

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current <= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2010

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: H67A-S/H67A

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2010

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or

S/PDIF cables to the internal connectors on the motherboard, make sure

their pinouts are matching with the connectors on the motherboard. Incorrect

connections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory ..................................................................................11

Install an Expansion Card ......................................................................13

Install other Internal Connectors ............................................................14

Jumpers ..................................................................................................18

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................21

Main .......................................................................................................22

Advanced ...............................................................................................24

Chipset ...................................................................................................31

Boot ........................................................................................................34

Power .....................................................................................................35

Health .....................................................................................................36

Security ..................................................................................................37

Save & Exit .............................................................................................38

Chapter 4 CD Instruction

Utility CD content....................................................................................40

Install driver and utility ............................................................................41

FOX ONE

Main Page ........................................................................................44

CPU Control .....................................................................................48

Frequency Control ............................................................................50

Limit Setting......................................................................................51

Voltage Control .................................................................................53

Fan Control.......................................................................................54

FOX LiveUpdate

Local Update ....................................................................................55

Online Update ..................................................................................57

Congure .........................................................................................60

About & Help ....................................................................................62

FOX LOGO .............................................................................................63

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Support

FOX DMI ................................................................................................64

Browser Conguration Utility ..................................................................65

Chapter 5 RAID Conguration

RAID Conguration Introduction.............................................................68

Intel® Matrix Storage Manager ..............................................................70

Create a RAID Driver Diskette ...............................................................71

BIOS Conguration ................................................................................

Create RAID in BIOS..............................................................................73

Install a New Windows XP ...................................................................102

Technical Support :

Thank you for buying Foxconn H67A-S/H67A motherboard. Foxconn

products are engineered to maximize computing power, providing

only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, H67A-S/

H67A enables you to unleash more power from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

(Continued on the next page)

1-1 Product Specications

CPU Support LGA1155 socket Intel® CPU, Max processor power up to 95W

For the latest CPU information, please visit:

http://www.foxconnsupport.com/cpusupportlist.aspx

Chipset Intel® H67

Memory 4 x 240-pin DDR3 DIMMs

Support up to 16GB of system memory

Dual channel DDR3 2200(oc*)/1600/1333/1066 MHz architecture

(oc*: overclocking)

Expansion Slots 1 x PCI Express x16 slot

2 x PCI Express x1 slots

3 x PCI slots

Storage H67 chipset:

- 3 x SATA II connectors, 300MB/s data transfer rat

- 2 x SATA III connectors, 600MB/s data transfer rate

- 1 x ESATA connector

- Support RAID 0, 1, 5, 10

LAN Realtek 8111E Gigabit LAN chip

Audio Realtek ALC888S audio chip:

- High Denition Audio

- 2/4/5.1/7.1-channel

- Support for S/PDIF Out

- Support Jack-Sensing function

USB Support hot plug

Support up to 14 x USB 2.0 ports (6 rear panel ports, 4 onboard USB

headers supporting 8 extra ports)

Support up to 2 x USB 3.0 ports (Only for H67A-S)

Support USB 2.0 protocol up to 480Mb/s

Internal Connectors 1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

5 x SATA connectors

4 x USB 2.0 connectors (supporting 8 x USB devices)

1 x CPU fan header (4-pin)

2 x System fan headers (4-pin)

1 x Front panel connector

1 x CD_IN connector

1 x Front Audio connector

1 x SPDIF_OUT connector

1 x COM connector

1 x TPM connector

1 x Chassis intrusion alarm headers(INTR)

1 x Speaker connector

The chipset driver of this motherboard does not support Windows® 2000.

Back Panel

Connectors

1 x PS/2 Keyboard port

1 x VGA port

1 x DVI-D port

1 x Optical SPDIF Out port

6 x USB 2.0 ports

2 x USB 3.0 ports (Only for H67A-S)

1 x RJ-45 LAN port

1 x ESATA Port

8-channel Audio ports

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth

Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM),

S4 (suspend to disk), S5 (soft - off)

Support EuP function

Bundled Software FOX ONE, FOX LiveUpdate, FOX LOGO, FOX DMI

Operating System Support for Microsoft® Windows® 7/Vista/XP

Form Factor ATX Form Factor, 12 inches x 8.8 inches (30.5cm x 22.4cm)

1-2 Layout

Note : The above motherboard layout is for reference only, please refer to the physical

motherboard for detail.

1. 8-pin ATX 12V Power Connector

2. SYS_FAN1 Header

3. PCI Express x16 Slot

4. PCI Express x1 Slots

5. PCI Slots

6. Front Audio Connector

7. CD_IN Connector

8. SPDIF_OUT Connector

9. Front USB Connectors

10. Clear CMOS Jumper

11. TPM Connector

12. Front Panel Connector

13. COM1 Header

14. Chassis Intrusion Alarm Header

15. MFG Jumper

16. SATA Connectors

17. SYS_FAN2 Header

18. Speaker Connector

19. Chipset: Intel® H67

20. 24-pin ATX Power Connector

21. DDR3 DIMM Slots

22. CPU_FAN Header

23. LGA 1155 CPU Socket

235

1514 1917 18 2016

1-3 Back Panel Connectors

1. PS/2 Keyboard Port

Use the upper port (purple) to connect a PS/2 keyboard.

2. USB 2.0 Ports

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as an

USB keyboard/mouse, USB printer, USB ash drive and etc.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

Back Panel of H67A-S

Back Panel of H67A

LAN Port

PS/2 Keyboard Port

Optical

S/PDIF Out

Audio PortsUSB 2.0 Ports

Line Out

Microphone In

Subwoofer

Rear Speaker

Side Speaker

Line In

VGA Port

DVI-D Port External

SATA Port

USB 3.0 Ports

LAN Port

PS/2 Keyboard Port

Optical

S/PDIF Out

Audio PortsUSB 2.0 Ports

Line Out

Microphone In

Subwoofer

Rear Speaker

Side Speaker

Line In

1 9

VGA Port

DVI-D Port External

SATA Port

4. DVI-D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. Optical S/PDIF Out Port

This port provides digital audio out to an external audio system that supports digital optical audio.

6. External SATA Port

To connect external SATA device(s) to your system by expanding the internal SATA port(s) to the

chassis back panel. External SATA device shall provide power by its own.

7. USB 3.0 Ports(Only for H67A-S)

You need to install the USB 3.0 driver in the Driver CD before using it. The USB port supports the

USB 3.0/2.0/1.1 specication. Use this port for USB devices such as an USB keyboard/mouse,

USB printer, USB ash drive and etc.

8. Audio Ports

For the denition of each audio port, please refer to the table below :

9. RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1Gb/s data rate.

Port 2-channel 4-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data Activ-

ity

Off 10 Mb/s Connection

Green 100 Mb/s Connection

Orange 1000 Mb/s Connection

Active

LED

Link

LED

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin

headers and the mounting of jumpers. Caution should be exercised

during the installation of these modules. Please refer to the

motherboard layout prior to any installation and read the contents in

this chapter carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumper

Please visit the following website for more supporting information about your motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or

you may locate the notches on both sides of the CPU and alignment keys on the CPU

socket.)

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you wish to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

Hyper-Threading Technology System Requirements:

(Go to Intel's website for more information about the Hyper-Threading Technology)

■ An Intel® CPU that supports HT Technology

■ A chipset that supports HT Technology

■ An operating system that is optimized for HT Technology

■ A BIOS that supports HT Technology and has it enabled

LGA1155 CPU Socket

Alignment Key

Pin-1 corner of the

CPU Socket

LGA1155 CPU

Notch

Pin-1 triangle

marking of CPU

Follow the steps to install the CPU onto the CPU socket :

2. Lift the metal cover on the CPU

socket.

3. Remove protective socket cover.

5. When CPU is properly seated,

replace the metal cover and push the

CPU socket lever back to its locked

position.

4. Check pin one marking (triangle)

with the pin one corner of the CPU

socket, align the CPU notches with

the socket alignment keys and gently

put the CPU onto the socket.

Before installing the CPU, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the CPU.

UTI

1. Release the CPU socket lever.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the motherboard.

1. Apply and spread an even thermal grease on the surface of CPU.

2. Place the four bolts of the CPU

cooler to the holes of the motherboard, push them straight down from the top, and the bolts will be fastened on the motherboard. That's it.

3. Chec k the sol de r side of the motherboard, the push pin should be

xed as depicted in the picture.

4. Attach t he 4-wire C PU cooler

connector to the CPU FAN header on the motherboard .

Release bolts of CPU cooler from motherboard :

1.Tu r n i n g the p u s h p i n ( b o l t ) along with the direction of arrow (counterclockwise).

2. Pull the push pin straight up.

3. Turning push pin clockwise to its default position.

Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

2-2 Install the Memory

Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels and each channel has two memory

sockets as following:

Channel 0 : DIMM1, DIMM2

Channel 1 : DIMM3, DIMM4

The combinations of DIMM modules are :

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS DS/SS - -

Single Channel - - DS/SS -

Single Channel - - DS/SS DS/SS

Dual Channel DS/SS - DS/SS -

Dual Channel - DS/SS - DS/SS

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Double Side, SS : Single Side, - : No Memory)

It is recommended that memory of the same capacity, brand, speed, and chips be

used and please select dual channel rst to achieve optimum performance.

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put

your ngers on top edge of the module, and push it down rmly and seat it vertically into the memory

socket.

Step 2:

The clips at both ends of the socket will snap into place when the memory module is securely inserted.

96-Pin

144-Pin

■ Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure to

install DDR3 DIMMs on this motherboard.

Notch

2-3 Install an Expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.

Make sure the graphics card is locked by the latch at the end of

the PCI Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot.

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

PCI

PCI Express x16

PCI Express x1

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply.

24-pin ATX Power Connector : PWR1

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure.

8-pin ATX 12 V Power Connector : PWR2

Connect the 8-pin ATX 12V power supply to PWR2 and provides power to the CPU.

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

We recommend you using a 24-pin power supply. If you are using a 20-pin power supply, you need

to align the ATX power connector according to the picture.

20-Pin Power

Pin No. 24

Pin # Denition Pin # Denition

1 GND 5 +12V

2 GND 6 +12V

3 GND 7 +12V

4 GND 8 +12V

PWR1

145

PWR2

GND+12V

USB Connectors : F_USB1/2/3/4

In addition to the six USB 2.0 ports on the rear panel,

this product also provides four 10-pin USB headers on its motherboard. By connecting through USB cables with them, user can quickly expand another eight USB ports on the front panel.

Serial ATA Connectors : SATA_1/2/3/4/5

The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which support this

feature. The SATA_3/4/5 allows up to 300MB/s data transfer rate, the SATA_1/2 support SATA

3.0 specication, and allows up to 600MB/s data

transfer rate.

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the chassis.

We recommend you using an 8-pin ATX 12V power supply. If you are using a 4-pin power supply, you need to align the ATX

power connector according to the picture on the right.

Connect a 4-pin

power plug

SATA_3/4/5

GND TX+ TXGND RXRX+

GND

PWR

EMPTY

SPEAKER

SPKJ

SATA_1/2

GND TX+ TXGND RXRX+

GND

1 2

109

GND

VCC

D+

D-

D+

GND

D-

VCC

EMPTY

F_USB 1/2/3/4

Front Panel Connector : FP1

This motherboard includes one connector for connecting the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It

indicates the active status of the hard disks. This 2-pin

connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system’s status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode

(S1) , the LED is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button.

Chassis Intruder Connector : INTR2

The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis is closed, the system will send a message out.

Audio Connector : CD_IN

CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable.

HDD-LED

RESET-SW

PWR-SW

PWR-LED

EMPTY

FP1

CD_IN

CD_L GND CD_R

INTR2

GND

INTRUDERJ

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It provides the Front Audio output choice.

S/PDIF Connector : SPDIF_OUT

The connector is used for S/PDIF output.

TPM Connector : TPM

The TPM (Trusted Platform Module) provides the ability to the PC to run applications more secure and to make transactions and communication more trustworthy. To utilize this function, you should purchase additional device and install it.

COM Connector : COM1

This motherboard supports one serial RS232 COM

port for legacy compatibility. User must purchase an-

other RS232 cable with a 9-pin D-sub connector at one end to connect with the external RS232 device and

another end with 10-pin female connector to connect

with COM1 connector in the motherboard.

Fan Connectors : CPU_FAN, SYS_FAN1/2

There are three main fan headers on this motherboard. The fan speed can be controlled and monitored in “Health” section of the BIOS Setup. These fans can be automatically turned off after the system enters

3, S4 and S5 sleeping states.

A_MIC2_L

A_MIC2_R

A_LINE2_L

SENSE_SEND

SENSE1_RETURN

PRESENCEJ

EMPTY

SENSE2_RETURN

AUD_GND

109

F_AUDIO

A_LINE2_R

CPU_FAN/SYS_FAN1/2

GND POWER SENSE CONTROL

SPDIF_OUT

+5V

EMPTY

SPDIF_OUT

GND

RLSD

SOUT

GND

RTS

DSR

DTR

CTS

EMPTY

SIN

COM1

LCLK#

LFRAME#

LRESET#

LAD3

VDD

LAD0

SB3V

GND

LPCPD#

GND

EMPTY

LAD2

LAD1

GND NC SERIRQ

CLKRUN#

19 20

TPM

2-5 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data, date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS data.

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Jumper Diagram Denition Description

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

Clear

Normal (Default)

CLR_CMOS

■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.

Intel® ME Jumper: MFG

This motherboard uses MFG jumper to enable or disable Intel® Management Engine function. Intel® Management Engine (ME) is an embedded microcontroller located in Intel chipset. It provides latest IT management features such as Intel® AMT, that allows to improve management of corporate assets.

Set the jumper to pins 1-2, you can enable the Intel® Management Engine function. Set the jumper to pins 2-3, you can disable the Intel® Management Engine function.

Enable (Default)

Disable

MFG

■ Before ashing BIOS ROM, you need to set MFG jumper to pins 2-3 rst.

This chapter tells how to change system settings through the

BIOS Setup menus. Detailed descriptions of the BIOS param-

eters are also provided.

You have to run the Setup Program when the following cases

occur :

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main

■ Advanced

■ Chipset

■ Boot

■ Power

■ Health

■ Security

■ Save & Exit

Since BIOS could be updated some other times, the BIOS information described in this manual is for reference only. We do not guarantee the content of this manual will remain consistent with the newly released BIOS at any given time in the future. Please visit our website for updated manual if it is available.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer,

when the message "Press <DEL> to enter Setup, <F7> to Boot Menu" appears at the bottom of

the screen, you can press <DEL> key to enter Setup.

Use the arrow right/left keys to select a specic function and go to the submenu. Each function is explained below:

Main

It displays the basic system conguration, such as CPU Name, memory size, system date,

time and so on. They all can be viewed or set up through this menu.

Advanced

The advanced system features can be set up through this menu.

Chipset

The values for the chipset can be changed through this menu, and the system performance can be optimized.

Boot

Boot features can be set up through this menu. You can set the boot device priority and enable

"Quiet Boot" feature here.

Power

All the items related with Green function features can be setup through this menu.

Health

This setup enables you to read/change fan speeds, and displays temperatures and voltages of your CPU/System.

Security

The Administrator/User password can be set up through this menu to prevent unauthorized use of your computer. If you set a password, the system will ask you to key in correct password before boot or access to Setup.

Save&Exit

The optimal performance settings can be loaded through this menu. However, it may offer better performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause problem if you have more memory or I/O cards installed. It means, if your system loading is heavy, set to optimal default may sometimes come out an unstable system. What you need

now is to adjust BIOS setting one by one, trial and error, to nd out the best setting for your

current system. You also can save or discard the changes and exit BIOS setup here.

We do not suggest that you change the default values in the BIOS Setup, and we shall not be responsible for any damage which resulted from the change you made.

Main

► System Date

<weekday><month><date> <year> format. Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read Only).

Month—month from 1 to 12.

Date—date from 1 to 31. Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► System Time

This item allows you to congure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value. The three elds of the setting are <hour> : <minute> : <second> respectively.

► Access Level

It displays your current access level. If you enter system with a user password, it will dispaly “User”. If no password is set or you enter system with administrator password, this item will dispaly “Administrator”.

► Model Name

This item shows the model name of this product.

► ME Version

It displays the current ME version.

► BIOS Version

It displays the current BIOS version. User can check this information and discuss with the eld

service people if a BIOS upgrade is needed.

► Build Date and Time

This item shows the BIOS building date and time.

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

Main Advanced Chipset Boot Power Health Security Save & Exit

System Date [Fri

10/29/2010]

System Time [09:51:21]

Access Level Administrator

Model Name H67A/H67A-S ME Version N/A BIOS Version A47F1014 Build Date and Time 10/27/2010 16:17:27

Halt On [All, but keyboard]

CPU Brand Name: Genuine Intel(R) CPU 0 @ 3.00GHz

Total Memory 1024 MB (DDR3 1333) MAC Address 00-45-45-44-44

→ ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit

Set the Date. Use Tab to switch between Date elements.

Main

[All Errors] : All errors can result in system halt.

[No Errors]: No errors can result in system halt.

[All, but keyboard] : All errors but keyboard can result in system halt.

► CPU Brand Name

It displays the current CPU name.

► Total Memory

This item displays the total memory size. The size is depending on how many memory modules are installed in your system before powering on.

► MAC Address

This item displays the onboard LAN MAC address.

+ 82 hidden pages