How it Works
Four-Faith
Loading...
F2203
User Manual
25 pgs1.35 Mb0

Four-Faith F2203 User Manual

Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
F2203 CDMA IP MODEM
USER MANUAL
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Contents
Contents
1.1 General................................................................................................................4
1.2 Features and Benefits.........................................................................................4
1.3 Working Principle...............................................................................................5
1.4 Specifications..................................................................................................... 5
2.1 General................................................................................................................7
2.2 Encasement List................................................................................................. 7
2.3 Installation and Cable Connection..................................................................... 7
2.4 Power..................................................................................................................9
2.5 Indicator Lights Introduction............................................................................. 9
Chapter 3 Configuration.................................................................................................10
3.1 Configuration Connection................................................................................10
3.2 Configuration Introduction...............................................................................10
3.3 Run the configure Tool: IP Modem Configure.exe..........................................11
3.4 Re-power IP MODEM......................................................................................11
3.5 Configuration....................................................................................................12
3.5.1 Data Service Center Settings.................................................................12
3.5.2 IP MODEM Settings............................................................................. 14
3.5.3 Other Settings........................................................................................ 18
3.6 Functions.......................................................................................................... 21
3.7 Work State Switch............................................................................................ 22
Appendix........................................................................................................................ 22
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Chapter 1 Brief Introduction of Product
1.1 General
F2203 CDMA IP MODEM is a kind of cellular terminal device that provides data
transfer function by public CDMA network.
It adopts high-powered industrial 16/32 bits CPU and embedded real time
operating system. It supports RS232 and RS485 (or RS422) port that can conveniently
and transparently connect one device to a cellular network, allowing you to connect to
your existing serial devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart
grid, industrial automation, telemetry, finance, POS, water supply, environment
protection, post, weather, and so on.
1.2 Features and Benefits
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 16/32 bits CPU
Support low-consumption mode, including sleep mode, scheduled online/offline
mode, scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
Power range: DC 5~35V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when
offline to make it always online
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Standard and Convenience
Support standard RS232 and RS485(or RS422) port that can connect to serial
devices directly
Support intellectual mode, enter into communication state automatically when
powered
Provide management software for remote management
Support several work modes
Convenient configuration and maintenance interface
High-performance
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Support TCP server and support multi TCP client connection(optional)
Support double data centers, one main and another backup
Support multi data centers and it can support 5 data centers at the same time
Support multi online trigger ways, including SMS, ring and data. Support link
disconnection when timeout
Support dynamic domain name(DDNS) and IP access to data center
Design with standard TCP/IP protocol stack
Support APN/VPDN
1.3 Working Principle
The principle chart of the IP MODEM is as following:
1.4 Specifications
Cellular Specification
Item
Content
Cellular Module
Industrial cellular module
Standard and
Band
CDMA2000 1xRTT 800MHz,
800/1900MHz(optional),450MHz(optional)
Bandwidth
153.6Kbps
TX power
<30dBm
RX sensitivity
<-104dBm
Hardware System
Item
Content
CPU
Industrial 16/32 bits CPU
FLASH
1MB(Extendable)
SRAM
512KB(Extendable)
Interface Type
Item
Content
Serial
1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator
"Power", "ACT", "Online"
Antenna
Standard SMA female interface, 50 ohm, lighting
protection(optional)
Embedded processing
system
CDMA Module
Power
RS232 serial
Interface
Indicator lights DATA Interface
User interface
RS485 serial
Interface
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
SIM/UIM
Standard 3V/1.8V user card interface, 15KV ESD protection
Power
Standard 3-PIN power jack, reverse-voltage and overvoltage
protection
Power Input
Item
Content
Standard Power
DC 12V/1.5A
Power Range
DC 5~35V
Consumption
<250mA (12V)
Physical Characteristics
Item
Content
Housing
Iron, providing IP30 protection
Dimensions
91x58.5x22 mm
Weight
205g
Environmental Limits
Item
Content
Operating
Temperature
-25~+65ºC（-13~+149℉）
Extended
-30~+75ºC（-22~+167℉）
Operating
Temperature
Storage
Temperature
-40~+85ºC（-40~+185℉）
Operating
Humidity
95% ( Non-condensing)
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
Chapter 2 Installation Introduction
2.1 General
The IP MODEM must be installed correctly to make it work properly.
Warning: Forbid to install the IP MODEM when powered!
2.2 Encasement List
Name
Quantity
Remark
IP MODEM host
1
Antenna
1
Power adapter
1
RS232 data cable
1
optional
RS485 data cable
1
optional
Manual CD
1
Certification card
1
Maintenance card
1
2.3 Installation and Cable Connection
Dimension: (unit: mm)
Four-Faith Smart Power Technology Co., Ltd.
Email: allen@four-faith.com Tel: +86-17750019379 Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
58.5
35
28
28
22
8
25
Ф3
Ф5
4
Installation of SIM/UIM card:
Firstly power off the IP MODEM, and press the out button of the SIM/UIM card
outlet with a needle object. Then the SIM/UIM card sheath will flick out at once. Put
SIM/UIM card into the card sheath (Pay attention to put the side which has metal point
outside), and insert card sheath back to the SIM/UIM card outlet.
Warning: Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the IP
MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality
of antenna will be influenced!
Installation of cable:
Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP
MODEM, and connect the other end with user’s device.
The signal connection of the RS232 data cable is as follows:
DB9F
DB9F RS232 data cable
1
RXD 2
TXD 3
4
GND 5
6
7
8
9
1
2 RXD
3 TXD
4
5GND
6
7
8
9
Loading...
+ 17 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use