Fountek Neo CD-3 Brochure

NeoCD3.0 ribbon tweeter is a high-performance component
which is probably the best choice to building/upgrade your
loudspeaker.

Features

• Advanced composite material ribbon diaphragm, which provide higher
power handling and guarantees a high degree of signal fidelity and
broad frequency response.

• Super strong Neodymium magnet fro high efficiency

• Build-in impedance conversion transformer

• Effective from 1,200Hz upwards due to the large diaphragm area and low self-resonance.

• Low distortion factor, good power-handling capabilities, high linear impedance and amplitude

frequency response and the broad frequency response range.

Specifications

Ribbon material
Ribbon mass 18mg
Ribbon dimension 8mmX60mmX0.02mm
Ribbon area 480square micrometer
Gap flux 0.6 Telsa
Gap height 3mm
Impedance 7 Ohm
DCR 0.02 Ohm
Frequency response 1,400~40,000Hz
Sensitivity 95dB/2.83V@1M
Resonance frequency 400Hz
Power handling 17W Nominal, 40W Max
Recommended crossover 2,500Hz / 2nd-Order

Advanced composite material

Address: South Area, Shi Ba Li Qiao Jia Xing, Zhe Jiang 314004, China

Tel: [phone] Fax: [phone]

Website: www.fountek.net

E-mail: [e-mail]