Fountain TECH FT-2500 User Manual

Fountain TECH Pump User Guide.

This manual covers installation, maintainance and safety
instructions for the following UL-approved FT-2500

Energy efcient pump.

INSTALLATION

Submersed: Place your pump on the top of a at brick or
stone at the bottom of your water garden. Elevating the
pump off the basin bottom will help prevent the debris

from interfering with the pump’s performance. To test

performance, completely submerge the pump under water

and plug into a GFCI outlet.

Outlet Tube: You will notice the outlet tube can be con­nected to several sizes of tubing. Always trim to the larg­est-sized tubing. The larger the inside diameter tubing,

the greater the output.

CAUTION: ALWAYS UNPLUG

THE PUMP BEFORE HANDLING.

* Make sure the pump is fully submerged.
* Check tubing for kinks or obstructions and ensure
pump outlet is clear of objects.
* Check water inlet for any obstructions.

1. Always unplug the pump from the electrical
outlet before handling it.

2. Keep the pond water clean.

3. Always operate the pump completely
submerged. Check the water level daily to
ensure the pump will be pumping plenty of
water. If water levels are too low and the
pump cannot pull enough water, it can sustain
damage. Add water if necessary.

4. Clean the pump periodically to prevent
mineral deposits and contamination.

Product is not to be operated below 41F—Freeze

Damage May Occur. If the pump is installed outdoors in
a freeze zone, ensure all water is removed and the unit is
completely dry and stored in a frost-free area.

1. To reduce risk of electric shock, always unplug
the pump from the electrical outlet before

handling or cleaning the pump.

2. To reduce risk of the electric shock, inspect the
pump and the cord for damage before installation

or maintenance---replace pump if damage is
found.

3. Do not exceed proper voltage as indicated on the

pump’s cord labels. A GFCI outlet is required.

4. Always keep the cord away from high

temperature and heat.

5. To achieve the best owing performance, the
pump should be placed on a at surface.

6. Do not let the pump run dry as this will shorten
the pump’s life.

7. Do not lift, hang, or pull the pump by the power

cord.

8. Do not pump heated liquids.

FT-2500

Pump User Guide

Copyright 2003 Fountain TECHH

Warranty

Fountain TECH guarantees this product for

a period of 24 months. Guarantee is void

if the product is misused or tampered with.

Customer must include receipt with

defective pump. If the pump is found to be

defective, Fountain TECH will repair it or

replace it with a new one.

Please keep this for your records;

Date of purchase ________________________

Model No ________________________

Name of Dealer ________________________

Fountain TECH

2351 Thompson Way, #C-2

Santa Maria, CA 93455

[phone]

www.fountaintechpumps.com

Safety Notes:

Fountain Tech Pumps are carefully

inspected and tested to ensure both safety

and operating performance. However,

failure to follow the instructions and

warnings in this guide may result in pump

damage and /or serious injury.

Fountain Tech will not be held liable for

any damage resulting from failure to

observe this guide’s instructions.