WARNING - When using electric appliances, basic precautions should
always be followed, including the following:
• Read all the instructions before using the engraver.
• Always wear safety glasses when using the engraver.
• To reduce the risk of injury, close supervision is necessary when the engraver is used near
children.
• Do not contact moving parts.
• Only use replacement parts sold by the manufacturer.
• To disconnect, turn the switch to the off position, then remove plug from outlet.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Unplug from outlet when not in use and before servicing or cleaning.
• Do not operate the engraver with a damaged cord or plug, or after the engraver malfunctions
or is dropped or damaged in any manner. Return engraver to the nearest authorized service
facility for examination, repair, or electrical or mechanical adjustment.
• To reduce the risk of electrical shock, do not put the engraver in water or other liquid. Do not
place or store the engraver where it can fall or be pulled into a tub or sink.
IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS.