Fossil STARCK LED DIGITAL, LED DIGITAL User Manual

LED Digital Instructions

Normal Display:

• Press and hold “ ” for one second to “wake up” the watch. The watch will display time mode.
“ ” will take you to the next mode. Mode sequence is time, calendar and “sleep mode.”

• Watch will return to “sleep mode” if no button is pressed for 2 seconds.

• If “ ” is pressed for over 1 second, the display will light up for 6 seconds. The watch will then
return to sleep mode, even if the button is still pushed in.

• When in setting modes, if “ ” is pressed and held for 2 seconds, the digits will automatically
advance.

Mode Description:

Time Mode Calendar Mode Sleep Mode

Hour

Minute

12 Hour and 24 Hour Display:

Press Press

Press and hold for 1 second to wake up the watch

Time Mode

(12 Hour format)

Hour

Hour

Month

Date

Time Mode

(24 Hour format)

Minute

Time Mode:

2 seconds

Calendar Mode:

2 seconds

(Hour: 1−12)

12 Hour/

24 Hour Setting

12/24 hour format

Year Setting

(2004−2053)

Press to exit

Minute

(Hour: 0−24)

Hour Setting Minute Setting

Press Press Hold

Press to advancePress to toggle

Press to exit

Month Setting

(1−12)

Press Press Hold

Press to advance

Date Setting

(1−28,29,30,31)

depends on year

and month

1. Press and hold the “ ” button for 1 second to
“wake up” the watch. In time mode, press and
hold “ ” for 2 seconds to enter time setting mode;
12/24 hour time setting will flash.

2. Press “ ” to adjust the flashing digits.

3. Press “ ” to set and advance to the next adjustable
element (in this case the hour digits).

4. Repeat steps 2 and 3 to set the hour and minutes.

5. “ ” will exit set mode.

1. Press and hold the “ ” button for 1 second to
“wake up” the watch. Press “ ” again to enter
calendar mode. In calendar mode, press and hold
“ ” for 2 seconds to enter calendar setting mode;
year digits will start to flash. Year digits will be
between 2004-2053, and then return to 2004.

2. Press “ ” To adjust the flashing digits.

3. Press “ ” to set and advance to the next adjustable
element (in this case the month).

4. Repeat steps 2 and 3 to set the month and date.

5. “ ” will exit set mode and update the calendar.

6. If no button is pressed for 30 seconds, the setting
values will be ignored and the watch will return to
time mode.