Fossil FL038 User Manual

Sport Digital FL038

B C

A D

Normal Time Display

1.In regular time display mode, press pusher and hold pusher C for 2 seconds to toggle between 12/24-hour format.

2.Press pusher B to enter time and calendar setting mode.

3.Press pusher D for chime on/off.

4.Press pusher E for EL.

Time and Calendar Setting

1.Press and hold pusher B for 2 seconds to enter setting mode. Chime on/off will begin flashing. Press pusher B or C to adjust chime to on/off and pusher A to set.

2.Press pusher C or D to turn on/off chime.

3.Press pusher A to select 12/24-hour time, hour, minute, second, year, month and day.

4.Press pusher C to increase the digit; press pusher D to decrease the digit.

5.Press pusher B to exit setting mode.

6.If no pushers are operated for 60 seconds, setting will be returned to Normal Time Display.

Chronograph Mode

1.Press pusher A to select chronograph mode.

2.Press pusher C to start/stop the chronograph.

3.Press and hold pusher D for 2 seconds to reset.

Lap Counting

1.Press pusher D while chronograph is running (will record up to 20 laps).

2.Press pusher C to finalize timing.

3.Press pusher B to recall laps.

4.Press pusher D to enter regular Chronograph mode; press and hold pusher D for 2 seconds to reset to zero.

Timer Setting

1.Press pusher A to select timer mode.

2.Press and hold pusher B for 2 seconds to enter setting mode.

3.Press pusher A to select hour, minute, second.

4.Press pusher C to increase the digit; press pusher D to decrease the digit.

5.Press pusher B to exit setting mode.

6.Press pusher C to start/stop the timer.

7.Press pusher D to reset the timer to the preset value.

8.Timer alarm will sound for 30 seconds when the timer count is down to zero. Alarm can be stopped by pressing any pusher.

9.If no pushers are operated for 60 seconds, setting will be returned to Normal Time Display.

Alarm Setting

1.Press pusher A to select alarm mode.

2.Press pusher C to scroll through alarms.

3.Press pusher D to enable/disable the alarm.

4.Press and hold pusher B for 2 seconds to enter setting mode. Hour will begin flashing.

5.Press pusher A to select hour and minute.

6.Press pusher C to increase the digit; press pusher D to decrease the digit.

7.Press pusher B to exit setting mode.

8.When set, the alarm will sound for 30 seconds and can be stopped by pressing any pusher.

9.If no pushers are operated for 30 seconds, setting will be returned to Normal Time Display.